VIMAI V6 Smart Wireless Microphone User Manual

VIMAI V6 Smart Wireless Microphone

Introduction

Thank you for choosing our product.

• This product is a smart wireless microphone, which can provide professional-level recording output. Plug-and-play, no APP.
• Multiple uses: Can be used for live streaming, Video Recording, Interviewing< Online Teaching and others.
• The wireless microphone is consist of two parts, one is the Microphone Transmitter and the other one is 3-in-1 multi-function receiver. ( as below picture )

Product Structure Diagram

Microphone transmitter schematic diagram

1. Windproof Sponge
2. Indicator light of microphone
3. Type C charging port of microphone
4. Microphone Clip
5. Power button
6. Reset key of microphone

3-in-1 receiver schematic diagram

1. Power button
2. Volume button
3. Indicator light
4. Type C receiver
5. Lightning receiver
6. 3.5mm TRS interface
7. 3.5mm monitor interface
8. Type C charging port of receiver

How to use Lightning/Type-C receiver

• First: Plug the lightning or type-c receiver into the lightning or type-c port of cell phone, the green light of receiver flashes Slowly.
• Second: Single press the power button of mic, it is turned on successfully when green light is on.
• Last: Green light of receiver keeps always on, then the microphone works when opening phone camera to make video recording or opening live streaming Apps to make a live show.

Special Note:

• The using method of Number 8, If the mobile phone is in low battery during live streaming, The external power supply directly charges the phone through the Type-C port of the receiver.

How to use 3.5 mm receiver

• Step 1: Plug the receiver in the camera with the 3.5mm TRS adapter.
• Step 2: Press the power button of mic and receiver, green light indicator flashes and then go solid when conected successfully.

About UI

Microphone Transmitter

Power off

| Press the power button for 3-4s

/Auto power off with no connection for more than 10 min

|

Green light off

Charging| Type-c cable charging| The red light on when charging, Red ligh t off
Search for pairing| /| A green light flashed slowly
Paired| /| Green light always on
Low battery alarm| Battery<20%| Blue light flashes slowly
Mute| Single press| Blue light always on
Clear pairing| Press reset key quickly twice| Green light flashes quickly

Lightning/Type-C Receiver

The green light flashes slowly

Paired| /| Green light on
Clear pairing| Triple press the power button quickly within

1Os after power on

| Green light flashes quickly
Monitor volume up and down, loop control| Single press volume

“-+” – ” key

| Level l: red light flashes once Level 2: red light flashes twice Level 3:Red light flashes three

times

Noise reduction level, loop control|

Double press volume

“-+” ” – ” key

| Level l: Green light flashes once Level 2: Green light flashes twice

Level 3: Green light flashes three times

---|---|---
The volume level has a __ memory function and the volume level of the last shutdown is defaulted when the power is turned on.

The noise reduction level has a memory function, and the default noise reduction level of the last shutdown

3.5mm Receiver

Searching for

pacing

| /|

Green light flashes slowly

Paired| /| Green light on
Low Power State| The battery in low power state| Red light flashes

Clear pairing

| Triple-press the power button quickly within

10’s after power on

|

Green light flashes quickly

Monitor volume up and down, loop control

|

Single press volume

“-+” ” key

| Level1: red light flashes once Level 2: red light flashes twice Level 3: Red light flashes three

times

Noise reduction level, loop control| Double press volume

“-+”                     key

| Level1: Green light flashes once Level 2: Green light flashes twice Level 3: Green light flashes three

times

The volume level has a memory function, and the volume level of the last shutdown is defaulted when the power is turned on

The noise reduction levelhasa memory function, and the default noise reduction level of the last shutdown

NOTE: You can listen the video or recording only after the receiver is unplugged from the device.

Packing list

1. Microphone transmitter Dual-Channel Version with 2 mics )
2. 3 -in-1 multi-function receiver
3. Type-C charging cable
4. User Manual
5. 3.5mm adapter cable

Safety Warning

In order to avoid electric shock, high temperature, fire, radiation, explosion, mechanical hazards and improper use of the product may cause personal injury or property damage, please read carefully and comply with the following matters before using this product:

1. When using the product, please confirm that the connected equipment and the product power match and reasonable adjustment of the volume of the equipment do not exceed the product power and loud volume for a long time, so as not to cause abnormalities in the product
2. If abnormalities are found in use (such as smoke, odor, etc.), please immediately turn off the power switch and turn off the power plug and then send the product to the dealer for repair
3. This product and accessories should be placed in a dry and ventilated place indoors, do not store for a long time in a humid, dusty environment avoid near fire, rain, water, excessive collision, throwing, vibration of the machine and cover the ventilation hole to avoid damage to its function
4. The use of the product must comply with the relevant safety regulations, laws and regulations clearly prohibit the use of the occasion please do not use the product, so as not to cause accidents
5. Please do not disassemble and modify or repair the machine by yourself to prevent personal injury, if you have questions or service needs, please contact your local dealer to follow up.

FCC STATEMENT

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference
2. This device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not oceur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

RF warning for Potable device: The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

MADE IN CHINA

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>