VIMAI EP059 Wireless Earbuds User Manual

VIMAI EP059 Wireless Earbuds

Product Information

Specifications

• Compliance: Part 15 of FCC Rules
• Interference: Must not cause harmful interference
• Operation: Must accept any interference received

Product Usage Instructions

FCC Requirement
It is important to note that any changes or modifications not approved by the party responsible for compliance may void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules, ensuring its adherence to regulatory standards. Please ensure that you follow the instructions provided below to ensure proper operation and compliance.

Harmful Interference
To prevent harmful interference, please take the following precautions:

1. Keep the device away from other electronic devices that emit strong electromagnetic fields.
2. Avoid placing the device near sources of interference such as power lines, fluorescent lights, or microwave ovens.
3. Ensure that the device is properly grounded.

Accepting Interference
To ensure proper operation, the device must accept any interference received. Please consider the following:

1. Do not attempt to block or shield the device from external interference.
2. If interference is experienced, try relocating the device to a different position within the operating area.
3. If necessary, consult the troubleshooting section of the user manual or contact customer support for further assistance.

Frequently Asked Questions (FAQ)

• Q: What happens if I make changes or modifications to the device without approval?
  A: Making changes or modifications without approval from the responsible party may void your authority to operate the equipment and could result in non- compliance with FCC regulations.

• Q: How can I prevent harmful interference?
  A: To prevent harmful interference, keep the device away from other electronic devices emitting strong electromagnetic fields, avoid placing it near power lines, fluorescent lights, or microwave ovens, and ensure proper grounding.

• Q: What should I do if I experience interference?
  A: If interference is experienced, try relocating the device to a different position within the operating area. If the issue persists, consult the troubleshooting section of the user manual or contact customer support for further assistance.

ID Diagram

Instructions

Pairing the Earbuds with Android system/IOS system

1. Open the top cover of the charging case, the earbuds will automatically turn on
2. Turn on your phone: Settings>Bluetooth>Turn on (menu may vary by device)
3. Select “Airplus”, if the phone asks for a password, enter four zeros (0000)
4. The mobile phone can be used after the connection is successful

Power off

1. Put the earbuds into the charging cast and close the lid for 3 seconds to shut down;
2. Auto-power off in 3 minutes without connecting the device.

Function Description

1. About Call

2. About Music

3. Siri/Voice assistant
   Long press the left/right earbud for 2s to wake up.

4. Both Earbuds can be switched freely
   The left and right earbuds can be connected to the mobile phone at will, switch freely, and connect back in seconds after booting.

5. In-ear sensor
   After the TWS is successfully paired, the first earphone comes with the prompt tone “dong” and the second earphone has no prompt tone.

Prompt Tone Description

Earphone Specification

Precautions

• Please store and use this product in a normal temperature environment
• Do not expose this product to rain or moisture
• Do not throw, to avoid product damage due to falling
• Do not disassemble, repair or modify this product
• Do not use chemical solvents to wipe this product
• Do not discard it at will, or place it in high temperature (temperature higher than 60 degrees) and fire to avoid danger.

FCC Requirement

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>