Hongkong Vimai Technology EP033-TYPE-C Wireless Microphone User Manual

Vimai Technology EP033-TYPE-C Wireless Microphone
User Manual

Introduction

Thanks for choosing our product. This product is a smart wireless microphone that provides professional-grade recording output. Plug and play, no app required. Multiple uses: It can be used in online live broadcast, video Vlog shooting, program interviews, recording, video teaching, and other occasions. The wireless Microphone consists of two parts, one is a Microphone transmitter, the other one is a Type-C receiver. (See as below picture)

ID Diagram

1. Windproof net
2. Microphone indicator
3..Microphone Type-C charging port
4. Microphone clip
5. Switch key
6. Microphone reset key| 7. Type-C port to connect the phone
8. Receiver indicator
9. Reset key of the receiver
10. Type C port of the receiver
11. Rope Hole
---|---

• The microphone is equipped with a built-in battery, which can be used only after being charged. The power of the Type-C receiver is supplied by phone (10. Type-C port is for phone charging )

How to use

Step 1: Connect the Type-C receiver to the phone with the Type-C port. The connection is successful if the phone displays a small icon.
Step 2: Press the switch key of the microphone, the indicator light turns green, and then power is turned on.
Step 3: The indicator red Light of the receiver keeps always on, then open the phone camera, Live App, or other Apps, and then use the microphone to receive sound.

About UI

Microphone Transmitter

second
Charging| Charging with Type-C cable| Red tight keeps on when charging,
and light off when fully charged
Pairing| | Greenlight flashes slowly
Paired| | Greenlight keeps on
Low battery alarm| Battery is below 20%| Blue light flashes slowly
Reset| Press the reset key once|

Type-C Receiver

Packing List

Content of packing

(1 ) Microphone transmitter
(2) Type-C receiver
(3) Type-C charging cable
(4) User manual
(5) Storage bag

Model No.: EP033-TYPE-C
FCC ID: 2AVLI-TYPE-C

FCC Requirement

changes modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 cf the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

MADE IN CHINA

Documents / Resources

| Hongkong Vimai Technology EP033-TYPE-C Wireless Microphone [pdf] User Manual
TYPE-C, TYPEC, 2AVLI-TYPE-C, 2AVLITYPEC, EP033-TYPE-C Wireless Microphone, Wireless Microphone
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>