LeapFrog 80-601060 Sweet Treats Learning Café User’s Guide

August 15, 2024
LeapFrog

LeapFrog 80-601060 Sweet Treats Learning Café

INTRODUCTION

Thank you for purchasing the Sweet Treats Learning Café™. Place the cups in the coffee machine and watch them fill while learning about sizes. Press the order button to hear customer orders based on sizes, shapes, colors and numbers. Follow the directions to complete the customer orders and become an expert barista.

INCLUDED IN THIS PACKAGE

  • One Sweet Treats Learning CaféTM
  • One large coffee cup
  • One small coffee cup
  • Two plates
  • One milk pitcher
  • One pastry plate
  • One sugar bowl
  • One sugar spoon
  • One circle donut
  • One heart cookie
  • One triangle cake
  • One parent’s guide

WARNING: All packing materials such as tape, plastic sheets, packaging locks, removable tags, cable ties and packaging screws are not part of this toy, and should be discarded for your child’s safety.

NOTE: Please keep this parent’s guide as it contains important information.

GETTING STARTED

BATTERY INSTALLATION

  1. Make sure the unit is turned OFF.
  2. Locate the battery cover on the bottom of the unit.
  3. Use a screwdriver to loosen the screw and open the battery cover.
  4. Install 3 new AA (AM-3/LR6) batteries into the battery box as illustrated. (The use of new alkaline batteries is recommended for maximum performance.)
  5. Replace the battery cover and tighten the screw to secure it.

BATTERY NOTICE

  • Use new alkaline batteries for maximum performance.
  • Use only batteries of the same or equivalent type as recommended.
  • Do not mix different types of batteries: alkaline, standard (carbon-zinc) or rechargeable (Ni-Cd, Ni-MH), or new and used batteries.
  • Do not use damaged batteries.
  • Insert batteries with the correct polarity.
  • Do not short-circuit the battery terminals.
  • Remove exhausted batteries from the toy.
  • Remove batteries during long periods of non-use.
  • Do not dispose of batteries in a fire.
  • Do not charge non-rechargeable batteries.
  • Remove rechargeable batteries from the toy before charging (if removable).
  • Rechargeable batteries are only to be charged under adult supervision

PRODUCT FEATURES

  1. On/Off/Volume Control Switch
    Slide the On/Off/Volume Control Switch to turn the toy on and select the volume.

  2. Magic Cups
    Fill the Small Coffee Cup or Large Coffee Cup by placing it on the Cup Sensor. Push down until the Dispenser Light goes on and stays on. Select a Beverage Button, then press down on the Star Button on the top of the machine to make the cup magically fill. If the cup is “full,” reset it by pushing down the “liquid” with your fingers or by placing the cup upside down on the blue nub on the top left side of the machine.

  3. Order Button
    Press to receive imaginary customer orders.

  4. Music Button
    Press to hear one of four learning songs.

  5. Steamer Button
    Press to hear steamer sounds.

  6. Temperature Dial
    Turn dial to select a temperature and hear corresponding brewing sounds.

  7. Grinder Button
    Press the Grinder Button to pretend to grind coffee beans.

ACTIVITY

  • Order Up Press the Order Button to hear imaginary customer orders. Fill the requests to hear rewarding sounds.

CARE & MAINTENANCE

  1. Keep the unit clean by wiping it with a slightly damp cloth.
  2. Keep the unit out of direct sunlight and away from any direct heat sources.
  3. Remove the batteries when the unit is not in use for an extended period of time.
  4. Do not drop the unit on a hard surface and do not expose the unit to excess moisture.

TROUBLESHOOTING

If for some reason the program/activity stops working, please follow these steps:

  1. Turn the unit OFF.
  2. Interrupt the power supply by removing the batteries.
  3. Let the unit stand for a few minutes, then replace the batteries.
  4. Turn the unit back ON. The unit will now be ready to play again.
  5. If the unit still does not work, replace it with an entire set of new batteries.

Environmental phenomena.

  • The unit may malfunction if subjected to radio-frequency interference.
  • It should revert to normal operation when the interference stops.
  • If not, it may become necessary to turn the power OFF and back ON or remove and reinstall the batteries.
  • In the unlikely event of an electrostatic discharge, the unit may malfunction and lose memory, requiring the user to reset the device by removing and reinstalling the batteries.

IMPORTANT NOTE: If the problem persists, please call our Consumer Services Department at 1-800-701-5327 in the U.S. or email support@leapfrog.com. Creating and developing LeapFrog® products is accompanied by a responsibility that we take very seriously. We make every effort to ensure the accuracy of the information, which forms the value of our products. However, errors sometimes can occur. It is important for you to know that we stand behind our products and encourage you to contact us with any problems and/or suggestions you might have. A service representative will be happy to help you.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:

  1. THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND
  2. THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.

CAN ICES-3 (B)/NMB-3(B)

Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Supplier’s Declaration of Conformity

  • Trade Name: LeapFrog®
  • Model: 6010
  • Product name: Sweet Treats Learning CaféTM
  • Responsible Party: LeapFrog Enterprises, Inc.
  • Address: 6401 Hollis Street, Suite 100, Emeryville, CA 94608
  • Website: leapfrog.com

Visit our website for more information about our products, downloads, resources, and more. leapfrog.com For warranty information, please visit leapfrog.com/warranty.

LeapFrog Enterprises, Inc., a subsidiary of VTech Holdings Limited. TM & © 2017 LeapFrog Enterprises, Inc. All rights reserved.

FREQUENTLY ASKED QUESTIONS

What is the recommended age range for the LeapFrog 80-601060 Sweet Treats Learning Café?

The LeapFrog 80-601060 Sweet Treats Learning Café is recommended for children aged 24 months to 7 years, making it suitable for toddlers and young children.

What are the dimensions of the LeapFrog 80-601060 Sweet Treats Learning Café?

The LeapFrog 80-601060 Sweet Treats Learning Café measures 5.2 x 9.8 x 8.6 inches, making it a compact and interactive toy that fits well in most play areas.

How much does the LeapFrog 80-601060 Sweet Treats Learning Café weigh?

The LeapFrog 80-601060 Sweet Treats Learning Café weighs 3.04 pounds, making it sturdy enough for play while still being easy for children to handle.

What type of batteries does the LeapFrog 80-601060 Sweet Treats Learning Café require?

The LeapFrog 80-601060 Sweet Treats Learning Café requires 3 AA batteries, which power its interactive features.

Who manufactures the LeapFrog 80-601060 Sweet Treats Learning Café?

The LeapFrog 80-601060 Sweet Treats Learning Café is manufactured by VTech, a brand known for creating educational and interactive toys for children.

What is the item model number for the LeapFrog 80-601060 Sweet Treats Learning Café?

The item model number for the LeapFrog 80-601060 Sweet Treats Learning Café is 80-601060, which is useful for identifying the product and finding compatible accessories.

What is the price of the LeapFrog 80-601060 Sweet Treats Learning Café?

The LeapFrog 80-601060 Sweet Treats Learning Café is priced at $34.99, offering an affordable and educational play option for young children.

What warranty is provided with the LeapFrog 80-601060 Sweet Treats Learning Café?

The LeapFrog 80-601060 Sweet Treats Learning Café comes with a 3-month warranty, covering any defects or issues within that period.

What educational benefits does the LeapFrog 80-601060 Sweet Treats Learning Café offer?

The LeapFrog 80-601060 Sweet Treats Learning Café offers educational benefits such as teaching basic counting, colors, and social skills through interactive play.

What type of interactive features does the LeapFrog 80-601060 Sweet Treats Learning Café have?

The LeapFrog 80-601060 Sweet Treats Learning Café includes interactive features such as buttons, lights, and sounds that engage children in learning activities.

What kind of role-playing opportunities does the LeapFrog 80-601060 Sweet Treats Learning Café provide?

The LeapFrog 80-601060 Sweet Treats Learning Café allows children to engage in role-playing as café owners or customers, fostering creativity and imagination.

Why is my LeapFrog 80-601060 Sweet Treats Learning Café not turning on?

Ensure that the LeapFrog 80-601060 Sweet Treats Learning Café has fresh batteries installed and that they are properly inserted with the correct polarity. If it still doesn’t turn on, try replacing the batteries and ensure the battery compartment is securely closed.

Why is the sound on my LeapFrog 80-601060 Sweet Treats Learning Café not working?

If the sound is not working, check the volume control to make sure it is not turned down. Replace the batteries if they are low, as this can affect sound quality. If the problem persists, inspect the speaker area for any blockages or damage.

Why is my LeapFrog 80-601060 Sweet Treats Learning Café not recognizing the accessories?

If the accessories are not being recognized, ensure they are clean and free from debris. Make sure they are being placed correctly on the sensors or designated areas. If the issue continues, gently clean the contact points on both the accessories and the main unit.

Why does my LeapFrog 80-601060 Sweet Treats Learning Café keep turning off randomly?

The LeapFrog 80-601060 Sweet Treats Learning Café might turn off if the batteries are low. Replace the batteries with fresh ones. If it still turns off randomly, check for any loose connections in the battery compartment.

How can I reset my LeapFrog 80-601060 Sweet Treats Learning Café?

To reset the LeapFrog 80-601060 Sweet Treats Learning Café, remove the batteries, wait for about 30 seconds, and then reinsert them. This can help resolve minor software glitches or operational issues.

VIDEO – PRODUCT OVERVIEW

DOWNLOAD THE PDF LINK:LeapFrog 80-601060 Sweet Treats Learning Café User’s Guide

REFERENCE:LeapFrog 80-601060 Sweet Treats Learning Café User’s Guide- Device.Report

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals