Audio-Technica ATW Series System20 Pro Receiver User Guide
- August 15, 2024
- Audio-Technica
Table of Contents
Audio-Technica ATW Series System20 Pro Receiver
Specifications
- Model: System20 Pro
- Components: ATW-R1440, ATW-T1401, ATW-T1402, ATW-T1406, ATW-T1407
- Battery Type: Lithium-ion battery for ATW-T1406/ATW-T1407, AA-Alkaline or Nickel-Metal Hybrid batteries for ATW-T1401/ATW-T1402
- Operating Distance: Minimum 20cm between the radiator & the body
Product Usage Instructions
Battery Caution:
Ensure to use the specified batteries according to the model. For ATW-T1406/ATW-T1407, use the dedicated lithium-ion battery. For ATW-T1401/ATW-T1402, use two AA-Alkaline or Nickel-Metal Hybrid batteries.
FCC Compliance:
Make sure that the device complies with Part 15 of the FCC Rules. Avoid making any changes or modifications not approved in the manual to maintain compliance.
RF Exposure Statement:
Keep a minimum distance of 20cm between the radiator and your body while operating ATW-R1440, ATW-T1406, or ATW-T1407 to comply with FCC radiation exposure limits.
Contact Information:
If you need assistance or have any questions regarding the product, contact the responsible company, Audio-Technica U.S., Inc., at the provided address and phone number.
FAQ
- Q: What should I do if the rechargeable battery life is reduced?
- A: If the life of the rechargeable battery is reduced, consider replacing it with a new one to maintain optimal performance.
- Q: Can I use different batteries than the ones recommended for ATW-T1401/ATW-T1402?
- A: It is recommended to use only two AA-Alkaline or Nickel-Metal Hybrid batteries for ATW-T1401/ATW-T1402 to ensure proper functioning and performance.
Important information
Warning:
To prevent fire or shock hazard, do not expose this apparatus to rain or moisture.
Caution:
- Do not expose this apparatus to drips or splashes.
- To avoid electric shock, do not open the cabinet.
- Refer servicing to qualified personnel only.
- Do not expose this apparatus to excessive heat such as sunshine, fire or the like.
- Do not subject this apparatus to strong impact.
- This apparatus should be located close enough to the AC outlet so that you can easily grasp the AC adapter at any time.
- In case of emergency, disconnect the AC adapter quickly.
- Do not place any objects filled with liquids, such as vases, on this apparatus.
- To prevent fire, do not place any naked flame sources (such as lighted candles) on this apparatus.
- Do not install this apparatus in a confined space such as a bookcase or similar unit.
- Install this apparatus only in the place where ventilation is good.
- Keep the product out of the reach of small children. The product is not intended for use around children.
- Do not place the product near fire to avoid an accident or the product catching fire.
- The rating label is put on the bottom of this apparatus.
Battery caution:
Specified batteries/ Rechargeable batteries
ATW-T1401/ATW-T1402: Two (2) AA alkaline or nickel–metal hydride batteries
ATW-T1406/ATW-T1407: Dedicated lithium-ion battery
- Keep batteries out of the reach of children.
- Observe correct polarity as marked.
- Do not expose the battery to excessive heat such as sunshine, fire or the like.
- Always consider environmental issues and follow local regulations when disposing of batteries.
- Remove depleted battery immediately.
- Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
- Do not use a leaking battery. If battery leakage occurs, avoid contact with skin. If contact occurs, immediately wash thoroughly with soap and water.
- If battery leakage comes into contact with your eyes, immediately flush with water and seek medical attention.
- To protect the built-in rechargeable battery, charge it at least once every 6 months. If too much time passes between charges, the life of the rechargeable battery may be reduced, or the rechargeable battery may no longer be able to be charged.
Battery caution (ATW-T1401/ATW-T1402):
- Use only disposable LR06(AA) alkaline or Ni-MH batteries.
- Do not use new and old batteries at the same time.
- Do not use different battery types or models.
FCC Statement
For customers in the USA
FCC Notice
Warning:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Caution:
You are cautioned that any changes or modifications not expressly approvedin this manual could void your authority to operate this equipment.
Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter used in other systems.
RF Exposure Statement
(ATW-T1401/ATW-T1402) This device complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels of RF energy that is deemed to comply without testing of specific absorption rate (SAR). (ATW-R1440/ATW-T1406/ATW-T1407) This equipment should be installed and operated with a minimum distance 20cm between the radiator & your body.
Contact:
- Responsible Company: Audio-Technica U.S., Inc.
- Address: 1221 Commerce Drive, Stow, Ohio 44224, USA
- Tel: 330-686-2600
- For customers in Canada
- ISED statement
CAN ICES-003(B)/NMB-003(B)
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may \cause undesired operation of the device.
(ATW-R1440/ATW-T1406/ATW-T1407)
This equipment should be installed and operated with a minimum distance 20cm between the radiator & your body. (ATW-T1401/ATW-T1402) The available scientific evidence does not show that any health problems are associated with using low power wireless devices. There is no proof, however, that these low- power wireless devices are absolutely safe. Low power wireless devices emit low levels of radio frequency energy (RF) in the microwave range while being used. Whereas high levels of RF can produce health effects (by heating tissue), exposure of low-level RF that does not produce heating effects causes no known adverse health effects. Many studies of low-level RF exposures have not found any biological effects. Some studies have suggested that some biological effects might occur, but such findings have not been confirmed by additional research. ATW-T1401 and ATW-T1402 have been tested and found to comply with ISED radiation exposure limits set forth for an uncontrolled environment and meets RSS-102 of the ISED radio frequency (RF) Exposure rules.
Communication specifications
- Maximum RF output: 10 mW EIRP
- Frequency band: 2.402 GHz – 2.480 GHz
- Modulation type: GFSK
About User Manual
For more information on how to use this product and troubleshoot any problems, refer to the user manual on the Audio-Technica website
Part names
ATW-R1440
- Receiver Chassis: ATW-RC14
- Receiver Unit: ATW-RU14
- Display
- Control dial
- Power button
- Antenna connector
- BACK button
- CH MENU button
- Network interface
- Receiver unit external interface
- AF balanced output jack
- Link in interface
- Link out interface
- Power input jack
ATW-T1401
- Antenna
- Mute switch
- Input connector
- Indicator
- Latch
- Display
- Power button
- Belt clip
- Charging port
- USB port
- Battery cover
ATW-T1402
- Display
- Indicator
- Mute switch
- Grip case
- Power button
- Charging port
- USB port
ATW-T1406
- USB port
- Status indicator lamp
- Microphone
- Talk switch
- Talk indicator lamp
- Display
- Power button
ATW-T1407
- USB port
- Status indicator lamp
- Input connector
- Talk switch
- Talk indicator lamp
- Display
- Power button
Warranty (Please be sure to read the notes below.)
For USA Only
End-User LIMITED WARRANTY information for the USA is available at www.audio- technica.com/usawarranties. You may also contact Audio-Technica U.S., Inc. to request a written copy of the Limited Warranty at 1-330-686-2600 or via mail at 1221 Commerce Drive, Stow, OH 44224
References
- 中央テクニカ株式会社 – 栃木県真岡市でビル管理やビル清掃、モップやマットのレンタル事業を行っています。
- Global Support|Audio-Technica Corporation オーディオテクニカ
- オーディオテクニカ
- Audio-Technica Corporation | Headphones, Microphones & Turntables | Audio-Technica
- 一般社団法人 電池工業会 | 一般社団法人 電池工業会
- オーディオテクニカ