hama 00 221082 Active DVB-T2 Indoor Antenna Instruction Manual

: June 11, 2024
: Hama

Table of Contents

00 221082 Active DVB-T2 Indoor Antenna
Explanation of Warning Symbols and Notes
Package Contents
Safety Notes
Specifications
Getting started and operation
4 TV reception
Care and Maintenance
Warranty Disclaimer
Declaration of Conformity
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

00
221082
Active DVB-T2 Indoor Antenna Operating Instructions

00 221082 Active DVB-T2 Indoor Antenna

Thank you for choosing a Hama product.
Take your time and read the following instructions and information completely. Please keep these instructions in a safe place for future reference. If you sell the device, please pass these operating instructions on to the new owner.
Controls and Displays

Micro-USB input
Antenna cable
Operating LED
Knob / On/off switch
Ring dipole
Telescopes

Explanation of Warning Symbols and Notes

Warning
This symbol is used to indicate safety instructions or to draw your attention to specific hazards and risks.
Note
This symbol is used to indicate additional information or important notes.

Package Contents

DVB-T Indoor Antenna
USB cable
These operating instructions

Safety Notes

The product is intended for private, non-commercial use only.
The product is intended for indoor use only.
Use the product for its intended purpose only.
Protect the product from dirt, moisture and overheating and use it in dry rooms only.
Children should be supervised to ensure that they do not play with the device.
Do not use the product in areas where the use of electronic devices is not permitted.
Connect the product only to a socket that has been approved for the device. The electrical socket must always be easily accessible.
Disconnect the product from the network using the power button – if this is not available, unplug the power cord from the socket.
Lay all cables so that they do not pose a tripping hazard.
Do not bend or crush the cable.
Do not drop the product and do not expose it to any major shocks.
Dispose of packaging material immediately according to locally applicable regulations.
Do not modify the device in any way. Doing so voids the warranty.

Warning

Do not use the product if the AC adapter, adapter cable or power cable is damaged.
Do not attempt to service or repair the device yourself. Leave any service work to qualified experts.
Do not open the device or continue to operate it if it becomes damaged.

Specifications

Rated power consumption	max. 50 mA
Supply voltage antenna	5 V ****
Power supply	5 V ****50 mA via USB
Frequency band(s)	87,5 – 108 MHz

174 – 230 MHz
1452 – 1479,5 MHz
470 – 690 MHz
Active antenna gain| UHF: 7 – 17 dBi
VHF: 6 – 16 dBi
Connection| coax plug
Ambient temperature| -20 to +40° C

Getting started and operation

5.1 Powering the antenna using the antenna cable (Fig. 2a)

Connect the coaxial cable of the antenna to the antenna input on the digital TV or set-top box.
Switch on the antenna by turning the knob (4) clockwise. The LED (3) lights up.
Switch on the digital TV (and the set-top box, if present).

Note
Powering the antenna directly from the set-top box or digital TV requires a supply voltage of 5 V. Note that the voltage of +5 V is provided by the set- top box and/or digital TV. Make any necessary settings in the menu.
5.2 Powering the antenna directly using the USB port of the digital TV / set-top box (Fig. 2b)

Connect the coaxial cable of the antenna to the digital TV or set-top box.
Connect the USB cable to an unused USB port on your TV or set-top box.
Switch on the antenna by turning the knob (4) clockwise. The LED (3) lights up.
Ensure that the set-top box or digital TV is switched on.

5.3 Powering the antenna using an external power supply unit (Fig. 2c)

Connect the coaxial cable of the antenna to the antenna input on the digital TV or set-top box.
Connect the USB cable to the antenna and to a suitable USB power supply unit (not included) and plug the latter into a socket.
Switch on the antenna by turning the knob (4) clockwise. The LED (3) lights up.
Switch on the digital TV (and the set-top box, if present).

4 TV reception

For perfect reception, extend both telescopes (6) fully.
Position the antenna for the best possible reception.
Depending on horizontal or vertical polarisation in the VHF/ UHF band, both the ring dipole (5) and the telescopes (6) can be adjusted.
Depending on the station, the amplifier performance must be adjusted using the knob (4).

Note
Please note that the number and quality of stations received may vary depending on the position of the antenna and local conditions.
5.5 Radio reception:

The antenna can also be used for DAB reception.
As most audio devices have an F-plug connection, please use a coax socket-F socket adapter (not included).

Note
Please note that the number and quality of stations received may vary depending on the position of the antenna and local conditions.

Care and Maintenance

Only clean this product with a slightly damp, lint-free cloth and do not use aggressive cleaning agents.

Warranty Disclaimer

Hama GmbH & Co KG assumes no liability and provides no warranty for damage resulting from improper installation/ mounting, improper use of the product or from failure to observe the operating instructions and/or safety notes.

Declaration of Conformity

Hereby, Hama GmbH & Co KG declares that the radio equipment type [00221082] is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address:
https://uk.hama.com 00221082 Downloads

Hama GmbH & Co KG
86652 Monheim / Germany
Service & Support
www.hama.com
+49 9091 502-0
All listed brands are trademarks of the corresponding companies.
Errors and omissions excepted, and subject to technical changes.
Our general terms of delivery and payment are applied.
00221082/03.23