EXCLUSIVE HOME RD013594DSEH 84 in 160 in. Adjustable 1 in Double Outdoor Curtain Rod Kit Instruction Manual

RD013594DSEH 84 in 160 in. Adjustable 1 in Double Outdoor Curtain Rod Kit
Instruction Manual

RD013594DSEH 84 in 160 in. Adjustable 1 in Double Outdoor Curtain Rod

Kit

3-PIECE ROD SET| FINIALS| BRACKETS| WALL SCREWS| ANCHORS| THUMB SCREWS
---|---|---|---|---|---
84-160 IN. (213-406CM)| X2| X3| X6| X6| X3

1. GATHER THE FOLLOWING TOOLS: PENCIL, MEASURING TAPE, SCREWDRIVER AND ELECTRIC DRILL.
2. POSITION BRACKETS IN A DESIRED LOCATION ABOVE THE WINDOW BY MARKING WALL SCREW LOCATIONS WITH A PENCIL. BOTH BRACKETS SHOULD BE EQUAL DISTANCE FROM THE OUTSIDE OF THE WINDOW AND THE THIRD BRACKET IN THE CENTER. TIPS: IN MOST SPACES, A CURTAIN ROD SET LOOKS BEST HUNG ON THE WALL OUTSIDE OF THE WINDOW FRAME. ALLOW 1 TO 3 IN (2.5 TO 7.61CM) ON EACH SIDE OF THE WINDOW, 2 TO 4 IN (5 TO 10CM) ABOVE THE WINDOW FRAME.
3. IF FIXING TO DRYWALL, CHECK FOR BURIED CABLES AND PIPES BEFORE USING A DRILL BIT. DRILL TO A DEPTH OF 32MM AND INSERT ANCHORS. IF FIXING TO WOODEN BATTEN, NO ANCHORS ARE REQUIRED.
4. MOUNT THE BRACKETS WITH THE WALL SCREWS PROVIDED.
5. CONNECT THE THREE-PIECE ROD TOGETHER. THE ROD WITH THE SMALLEST DIAMETER IS THE MIDDLE PIECE. REMOVE ALL ATTACHED FINIALS TO FIND THE SMALLER MIDDLE PIECE RESTING INSIDE THE LARGER END PIECE.
6. FIT ONE FINIAL TO ONE END OF THE ROD. SLIDE CURTAIN ONTO THE ROD BEFORE FITTING THE OTHER FINIAL.
7. PLACE CURTAIN ROD ONTO THE BRACKETS, TIGHTEN THE THUMB SCREWS.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>