KitchenAid KSM150PSVT0 Head Stand Mixer Owner’s Manual

: July 12, 2024
: KitchenAid

KitchenAid KSM150PSVT0 Head Stand Mixer

Specifications

Brand: KITCHENAID
Model: KSM150PSVT0
Voltage: 120 A.C.
Frequency: 60 Hz
Warranty: One-year limited warranty

Product Usage Instructions

It is important to follow these safety guidelines while using the KITCHENAID Stand Mixer:

Read all instructions provided in the manual.
Avoid contact with moving parts to prevent injury.
Do not use the Stand Mixer outdoors.
Unplug the appliance when not in use, before cleaning, or changing parts.
Ensure children are supervised when the appliance is in use.
The Stand Mixer requires a 120 A.C. voltage and operates at a frequency of 60 Hz.
Ensure the power cord is not damaged and always plug into a grounded 3-prong outlet to prevent electrical hazards.
Before cleaning the Stand Mixer, always unplug it and remove any attachments.
Use a damp cloth to clean the exterior and attachments. Do not immerse the appliance in water.
Ensure to remove the flat beater, wire whip, or dough hook from the Stand Mixer before washing them.
Follow the specific instructions in the manual for attaching and detaching these accessories.
The KITCHENAID Stand Mixer comes with a one-year limited warranty from the date of purchase.
Keep your proof of purchase handy for any warranty claims.

FAQ

Q: Can I use the Stand Mixer outdoors?
A: No, the Stand Mixer is designed for household use only and should not be used outdoors.
Q: How should I clean the attachments?
A: Remove the attachments from the Stand Mixer before washing them with a damp cloth. Do not immerse them in water.

STAND MIXER SAFETY

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages.

This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.” These words mean:
DANGER: You can be killed or seriously injured if you don’t immediately follow instructions.
WARNING: You can be killed or seriously injured if you don’t follow instructions.

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury and tell you what can happen if the instructions are not followed.

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should always be followed including the following:

Read all instructions.
To protect against the risk of electrical shock, do not put the Stand Mixer in water or other liquid.
Close supervision is necessary when any appliance is used by or near children.
Unplug the Stand Mixer from the outlet when not in use, before putting on or taking off parts, and before cleaning.
Avoid contacting moving parts. Keep hands, hair, clothing, as well as spatulas and other utensils away from the beater during operation to reduce the risk of injury to persons and/or damage to the Stand Mixer.
Do not operate the Stand Mixer with a damaged cord or plug or after the Stand Mixer malfunctions, or is dropped or damaged in any manner. Return the appliance to the nearest Authorized Service Center for examination, repair or electrical or mechanical adjustment. Call the KitchenAid Customer Satisfaction Center at 1-800-541-6390 for more information.
The use of attachments not recommended or sold by KitchenAid may cause fire, electrical shock or injury.
Do not use the Stand Mixer outdoors.
Do not let the cord hang over the edge of the table or counter.
Remove the flat beater, wire whip or dough hook from the Stand Mixer before washing.
This product is designed for household use only.

SAVE THESE INSTRUCTIONS

ELECTRICAL REQUIREMENTS

Volts: 120 A.C. only. Hertz: 60 The wattage rating for your Stand Mixer is printed on a tag under the mixer base. It is also listed on the trim band.
If the power cord is too short, have a qualified electrician or serviceman install an outlet near the appliance.

WARNING

Electrical Shock Hazard Plug into a grounded 3 prong outlet.
Do not remove ground prong. Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death, fire, or electrical shock.

KITCHENAID® STAND MIXER WARRANTY

Length of Warranty:| KitchenAid Will Pay For:| KitchenAid Will Not Pay For:
---|---|---
50 United States, the District of Columbia, Canada, and Puerto Rico: One- year limited warranty from the date of purchase.| 50 United States, the District of Columbia, and Canada: Hassle-free replacement of your Stand Mixer.

See the following page for details on how to arrange for replacement.

OR

In Puerto Rico:

The replacement parts and repair labor costs to correct defects

in materials and workmanship. Service must be provided by an Authorized KitchenAid Service Center. To arrange for service, follow the instructions on page 6.

| A. Repairs when Stand Mixer is used in other than

normal single-family home use.

B. Damage resulting from accident, alteration, misuse, or abuse or use of products not approved by KitchenAid.

C. Replacement parts or repair labor costs for Stand Mixer when operated outside the country of purchase.

DISCLAIMER OF IMPLIED WARRANTIES; LIMITATION OF REMEDIES

IMPLIED WARRANTIES, INCLUDING TO THE EXTENT APPLICABLE WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXCLUDED TO THE EXTENT LEGALLY PERMISSIBLE. ANY IMPLIED WARRANTIES THAT MAY BE IMPOSED BY LAW ARE LIMITED TO ONE YEAR OR THE SHORTEST PERIOD ALLOWED BY LAW. SOME STATES AND PROVINCES DO NOT ALLOW LIMITATIONS OR EXCLUSIONS ON HOW LONG AN IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS LASTS, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU.
IF THIS PRODUCT FAILS TO WORK AS WARRANTED, THE CUSTOMER’S SOLE AND EXCLUSIVE REMEDY SHALL BE REPAIR OR REPLACEMENT ACCORDING TO THE TERMS OF THIS LIMITED WARRANTY. KITCHENAID AND KITCHENAID CANADA DO NOT ASSUME ANY RESPONSIBILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. This warranty gives you specific legal rights and you may also have other rights which vary from state to state or province to province.

HASSLE-FREE REPLACEMENT WARRANTY – 50 UNITED STATES AND DISTRICT OF COLUMBIA

We’re so confident the quality of our products meets the exacting standards of KitchenAid that, if your Stand Mixer should fail within the first year of ownership, KitchenAid will arrange to deliver an identical or comparable replacement to your door free of charge and arrange to have your original Stand Mixer returned to us. Your replacement unit will also be covered by our one-year limited warranty. Please follow these instructions to receive this quality service.
If your KitchenAid® Stand Mixer should fail within the first year of ownership, simply call our toll-free Customer Satisfaction Center at 1-800-541-6390 Monday through Friday, 8 a.m. to 8 p.m. (Eastern Time), or Saturday, 10 a.m. to 5 p.m. Give the consultant your complete shipping address. (No P.O. Box numbers, please.)
When you receive your replacement Stand Mixer, use the carton and packing materials to pack up your original Stand Mixer. In the carton, include your name and address on a sheet of paper along with a copy of the proof of purchase (register receipt, credit card slip, etc.).

HASSLE-FREE REPLACEMENT WARRANTY – CANADA

We’re so confident the quality of our products meets the exacting standards of the KitchenAid® brand that, if your Stand Mixer should fail within the first year of ownership, KitchenAid Canada will replace your Stand Mixer with an identical or comparable replacement. Your replacement unit will also be covered by our one-year limited warranty. Please follow these instructions to receive this quality service.

If your KitchenAid® Stand Mixer should fail within the first year of ownership, take the Stand Mixer or ship collect to an Authorized KitchenAid Service Centre. In the carton include your name and complete shipping address along with a copy of the proof of purchase (register receipt, credit card slip, etc.). Your replacement Stand
Mixer will be returned prepaid and insured. If you are unable to obtain satisfactory service in this manner call our toll-free Customer Interaction Centre at 1-800-807-6777.
Or write to us at:
Customer Interaction Centre KitchenAid Canada
1901 Minnesota Court
Mississauga, ON L5N 3A7

HOW TO ARRANGE FOR WARRANTY SERVICE IN PUERTO RICO

Your KitchenAid® Stand Mixer is covered by a one-year limited warranty from the date of purchase. KitchenAid will pay for replacement parts and labor costs to correct defects in materials and workmanship. Service must be provided by an Authorized KitchenAid Service Center.
Take the Stand Mixer or ship prepaid and insured to an Authorized KitchenAid Service Center. Your repaired Stand Mixer will be returned prepaid and insured. If you are unable to obtain satisfactory service in this manner, call toll-free 1-800-541-6390 to learn the location of a Service Center near you.

HOW TO ARRANGE FOR SERVICE AFTER THE WARRANTY EXPIRES – ALL LOCATIONS

Before calling for service, please review the Troubleshooting section on page 7.
For service information in the 50 United States, District of Columbia, and Puerto Rico, call toll-free 1-800-541-6390.

Or write to:
Customer Satisfaction Center KitchenAid Portable Appliances
P.O. Box 218
St. Joseph, MI 49085-0218

Or contact an Authorized Service Center near you.
For service information in Canada,

call toll-free 1-800-807-6777.
Or write to:
Customer Interaction Centre KitchenAid Canada
1901 Minnesota Court Mississauga, ON L5N 3A7

HOW TO ARRANGE FOR SERVICE OUTSIDE THESE LOCATIONS

Consult your local KitchenAid dealer or the store where you purchased the Stand Mixer for information on how to obtain service.

For service information in Mexico,

call toll-free
01-800-024-17-17 (JV Distribuciones)
Or
01-800-902-31-00 (Industrias Birtman)

HOW TO ORDER ACCESSORIES AND REPLACEMENT PARTS

To order accessories or replacement parts for your Stand Mixer in the 50 United States, District of Columbia, and Puerto Rico,

call toll-free 1-800-541-6390 Monday through Friday, 8 a.m. to 8 p.m. (Eastern Time), or Saturday, 10 a.m. to 5 p.m. Or write to:
Customer Satisfaction Center, KitchenAid Portable Appliances,
P.O. Box 218,
St. Joseph, MI 49085-0218

To order accessories or replacement parts for your Stand Mixer in Canada, call toll-free 1-800-807-6777.

Or write to:
Customer Interaction Centre KitchenAid Canada
1901 Minnesota Court Mississauga, ON L5N 3A7
To order accessories or replacement parts for your Stand Mixer in Mexico, call toll-free
01-800-024-17-17 (JV Distribuciones) Or
01-800-902-31-00 (Industrias Birtman)

TROUBLESHOOTING PROBLEMS

Please read the following before calling your service center.

The Stand Mixer may warm up during use. Under heavy loads with extended mixing periods, you may not be able to comfortably touch the top of the unit. This is normal.
The Stand Mixer may emit a pungent odor, especially when new. This is common with electric motors.
If the flat beater hits the bowl, stop the Stand Mixer. See “Beater to Bowl Clearance,”

Keep a copy of the sales receipt showing the date of purchase. Proof of purchase will assure you of in-warranty service.
If your Stand Mixer should malfunction or fail to operate, please check the following

Is the Stand Mixer plugged in?
Is the fuse in the circuit to the Stand Mixer in working order? If you have a circuit breaker box, be sure the circuit is closed.
Turn the Stand Mixer off for 10-15 seconds, then turn it back on. If the mixer still does not start, allow it to cool for 30 minutes before turning it back on.

If the problem cannot be fixed with the steps provided in this section, then contact KitchenAid or an Authorized Service Center:

USA/Puerto Rico: 1-800-541-6390
Canada: 1-800-807-6777
Mexico: 01-800-024-17-17
(JV Distribuciones)
or
01-800-902-31-00
(Industrias Birdman)

See the KitchenAid Warranty and Service section on page 4 for additional details. Do not return the Blender to the retailer – they do not provide service.

TILT-HEAD STAND MIXER FEATURES

NOTE: This photo shows the Artisan® Series Stand Mixer. The features on your mixer model may differ slightly.

ASSEMBLING YOUR TILT-HEAD STAND MIXER

WARNING

Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove the ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death, fire, or electrical shock.

To Remove Bowl

Turn the speed control to OFF.
Unplug the stand mixer or disconnect the power.
Tilt motor head back.
Turn the bowl counterclockwise.

To Attach a Flat Beater, Wire Whip, or Dough Hook

Turn the speed control to OFF.
Unplug the stand mixer or disconnect the power.
Tilt motor head back.
Slip the beater onto the beater shaft and press upward as far as possible.
Turn the beater to the right, hooking the beater over pin on the shaft.
Plug into a grounded 3 prong outlet.

To Remove the Flat Beater, Wire Whip or Dough Hook

Turn the speed control to OFF.
Unplug the stand mixer or disconnect the power.
Tilt motor head back.
Press the beater upward as far as possible and turn left.
Pull the beater from the beater shaft.

To Attach Bowl

Turn speed control to OFF.
Unplug the stand mixer or disconnect the power.
Tilt motor head back.
Place bowl on bowl clamping plate.
Turn the bowl gently in the clockwise direction.
Plug into a grounded 3 prong outlet.

To Operate Speed Control
The speed control lever should always be set on the lowest speed for starting, then gradually moved to the desired higher speed to avoid splashing ingredients out of the bowl. See page 13 for the Speed Control Guide.

To Lock the Motor Head

Make sure the motor head is completely down.
Place the locking lever in the LOCK position.
Before mixing, test the lock by attempting to raise the head.

To Unlock the Motor Head

Place lever in the UNLOCK position.

NOTE: Motorhead should always be kept in the LOCK position when using a mixer.

USING YOUR POURING SHIELD

To Attach the Pouring Shield

Turn the speed control to OFF.
Unplug the stand mixer or disconnect the power.
Attach a flat beater, dough hook, or wire whip and bowl (see page 9).
From the front of the mixer, slide the pouring shield over the bowl until the shield is centered. The bottom rim of the shield should fit within the bowl.

To Remove the Pouring Shiel d

Turn speed control to OFF.
Unplug the stand mixer or disconnect the power.
Lift the front of the pour shield clear of the bowl rim and pull forward.
Remove the attachment and bowl

To Use Pouring Shield

For best results, rotate the shield so the motor head covers the “u” shaped gap in the shield. The pouring chute will be just to the right of the attachment hub as you face the mixer.
Pour the ingredients into the bowl through the pouring chute.

If Pouring Shield is included.

USING YOUR KITCHENAID® ACCESSORIES

Flat Beater for normal to heavy mixtures

cakes
creamed frostings
candies
cookies
pie pastry
biscuits
quick bread
meatloaf
mashed potatoes

Wire Whip for mixtures that need air incorporated

eggs
egg whites
heavy cream
boiled frostings
sponge cakes
angel food cakes
mayonnaise
some candies

Dough Hook for mixing and kneading yeast dough

breads
rolls
coffee cakes
buns

MIXING TIME

Your KitchenAid® Stand Mixer will mix faster and more thoroughly than most other electric Stand Mixers.
Therefore, the mixing time in most traditional and non-packaged recipes must be adjusted to avoid overbeating.
With cakes, for example, beating time may be half as long as with other Stand Mixers.

TILT-HEAD STAND MIXER USE

WARNING

Injury Hazard
Unplug the mixer before touching the beaters.
Failure to do so can result in broken bones, cuts or bruises.

NOTE: Do not scrape the bowl while the Stand Mixer is operating.
The bowl and beater are designed to provide thorough mixing without frequent scraping. Scraping the bowl once or twice during mixing is usually sufficient.
Turn the unit off before scraping.
The Stand Mixer may warm up during use. Under heavy load with extended mixing time, you may not be able to comfortably touch the top of the unit. This is normal.

CARE AND CLEANING

Bowl, white flat beater, and white dough hook may be washed in an automatic dishwasher. Or, clean them thoroughly in hot sudsy water and rinse completely before drying. Wire whip should be hand washed and dried immediately. Do not wash the wire whip in a dishwasher. Do not store the beaters on the shaft.
NOTE: Always be sure to unplug the Stand Mixer before cleaning. Wipe the Stand Mixer with a soft, damp cloth. Do not use household or commercial cleaners. Do not immerse in water. Wipe off the beater shaft frequently, removing any residue that may accumulate.

BEATER-TO-BOWL CLEARANCE
Your Stand Mixer is adjusted at the factory so the flat beater just clears the bottom of the bowl. If, for any reason, the flat beater hits the bottom of the bowl or is too far away from the bowl, you can correct the clearance easily.

Turn speed control to OFF.
Unplug the stand mixer or disconnect the power.
Tilt motor head back.
Turn screw (A) SLIGHTLY counterclockwise (left) to raise the flat beater or clockwise (right) to lower the flat beater.
Adjust so that the flat beater just clears the surface of the bowl. If you over-adjust the screw, you may not be able to lock the motor head when it is lowered.

NOTE: When properly adjusted, the flat beater will not strike the bottom or side of the bowl. If the flat beater or the wire whip is adjusted so that it strikes the bowl, the coating may wear off the beater, or the wires on the whip may wear.

SPEED CONTROL GUIDE

Number of Speed Stir Speed STIR

For slow stirring, combining, mashing, and starting all mixing procedures.
Use to add flour and dry ingredients to batter, add liquids to dry ingredients, and combine heavy mixtures.
Use with Ice Cream Maker attachment.

SLOW MIXING

For slow mixing, mashing, and faster stirring.
Use to mix heavy batters and candies, start mashing potatoes or other vegetables, cut shortening into flour, mix thin or splashy batters, and mix and knead yeast dough.
Use with Can Opener attachment.

MIXING, BEATING

For mixing semi-heavy batters, such as cookies.
Use to combine sugar and shortening and to add sugar to egg whites for meringues.
Medium speed for cake mixes. Use with: Food Grinder, Rotor Slicer/Shredder, and Fruit/Vegetable Strainer.

BEATING, CREAMING

For medium-fast beating (creaming) or whipping.
Use to finish mixing cake, doughnuts, and other batters.
High speed for cake mixes. Use with Citrus Juicer attachment.

FAST BEATING,WHIPPING

For whipping cream, egg whites, and boiled frostings.

FAST WHIPPING

For whipping small amounts of cream or egg whites. Use with Pasta Maker and Grain Mill attachments.
NOTE: Mixer may not maintain fast speeds under heavy load, such as when the Pasta Maker or Grain Mill attachments are used. This is normal.
NOTE: The Speed Control Lever can be set between the speeds listed in the above chart to obtain speeds 3, 5, 7, and 9 if a finer adjustment is required.
Do not exceed Speed 2 when preparing yeast dough. This may damage the mixer.

MIXING TIPS

Converting Your Recipe for the Mixer

The mixing instructions for recipes in this book can guide you in converting your own favorite recipes for preparation with your KitchenAid® Stand Mixer. Look for recipes similar to yours and then adapt your recipes to use
the procedures in similar KitchenAid recipes.
For example, the “quick mix” method (sometimes referred to as the “dump” method) is ideal for simple cakes, such as the Quick Yellow Cake and Easy White Cake included in this book. This method calls for combining dry ingredients with most or all liquid ingredients in one step.
More elaborate cakes, such as tortes, should be prepared using the traditional cake-mixing method. With this method, sugar and the shortening, butter, or margarine are thoroughly mixed (creamed) before other ingredients are added.
For all cakes, mixing times may change because your KitchenAid® Stand Mixer works more quickly than other mixers. In general, mixing a cake with the KitchenAid® Stand Mixer will take about half the time called for in most traditional and non-packaged cake recipes.
To help determine the ideal mixing time, observe the batter or dough and mix only until it has the desired appearance described in your recipe, such as “smooth and creamy.”
To select the best mixing speeds, use the Speed Control Guide on page 13.

Adding Ingredients
Always add ingredients as close to the side of the bowl as possible, not directly into the moving beater. The Pouring Shield can be used to simplify adding ingredients.
NOTE: If ingredients in the very bottom of the bowl are not thoroughly mixed, then the beater is not far enough into the bowl. See “Beater to Bowl Clearance” on page 12.
Cake Mixes
When preparing packaged cake mixes, use Speed 2 for low speed, Speed 4 for medium speed, and Speed 6 for high speed. For best results, mix for the time stated on the package directions.
Adding Nuts, Raisins, or Candied Fruits
Follow individual recipes for guidelines on including these ingredients. In general, solid materials should be folded in the last few seconds of mixing on Stir Speed. The batter should be thick enough to prevent the fruit or nuts from sinking to the bottom of the pan during baking. Sticky fruits should be dusted with flour for better distribution in the batter.
Liquid Mixtures
Mixtures containing large amounts of liquid ingredients should be mixed at lower speeds to avoid splashing. Increase the mixer speed only after the mixture has thickened.

EGG WHITES

Place room-temperature egg whites in a clean, dry bowl. Attach bowl and wire whip. To avoid splashing, gradually turn to the designated speed and whip to the desired stage. See chart below.

WHIPPED CREAM
Pour cold whipping cream into a chilled bowl. Attach bowl and wire whip. To avoid splashing, gradually turn to the designated speed and whip to the desired stage. See chart below.

ATTACHMENTS AND ACCESSORIES

General Information
KitchenAid® attachments are designed to ensure long life. The attachment power shaft and hub socket are of a square design, to eliminate any possibility of slipping during the transmission of power to the attachment. The hub and shaft housing are tapered to ensure a snug fit, even after prolonged use and wear. KitchenAid® attachments require no extra power unit to operate them; the power unit is built in.

GENERAL INSTRUCTIONS

To Attach

Turn the speed control to OFF.
Unplug the mixer or disconnect the power.
Loosen the attachment knob by turning it counterclockwise, and remove the attachment hub cover or flip up the hinged hub cover.
Insert the attachment shaft housing into the attachment hub, making certain the attachment power shaft fits into the square attachment hub socket. It may be necessary to rotate the attachment back and forth. When the attachment is in the proper position, the pin on the attachment will fit into the notch on the hub rim.
Tighten the attachment knob by turning it clockwise until the attachment is completely secured to the mixer.

WARNING

Electrical Shock Hazard Plug into a grounded 3 prong outlet.
Do not remove the ground prong. Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death, fire, or electrical shock.

Plug into a grounded 3 prong outlet.

To Remove

Turn the speed control to OFF.
Unplug the mixer or disconnect the power.
Loosen the attachment knob by turning it counterclockwise. Rotate the attachment slightly back and forth while pulling it out.
Replace the attachment hub cover. Tighten attachment knob by turning it clockwise.