CareCo MS08050027 X-GO TravelPro Folding Travel Mobility Scooter Instruction Manual

June 1, 2024
CareCo

CareCo MS08050027 X-GO TravelPro Folding Travel Mobility Scooter

CareCo-MS08050027-X-GO-TravelPro-Folding-Travel-Mobility-Scooter-
PRODUCT

Product Information

Specifications

  • Product Code: MS08050027
  • Difficulty Levels for Replacing Shrouds: Low, Moderate, High
  • Required Tool: 1x Pozi Screwdriver (Not Included)

Product Usage Instructions

Front Shrouds Replacement

  1. Using a Pozi screwdriver, unscrew the front shrouds from the scooter body, then lift them away from the scooter.
  2. Place the new shrouds into position, then secure them in place using a Pozi screwdriver.

Side Shrouds Replacement

  1. Using a Pozi screwdriver, unscrew the side shrouds from the scooter body, then lift them away from the scooter.
  2. Place the new shrouds into position, then secure them in place using a Pozi screwdriver.

Rear Shrouds Replacement

  1. Pry the rear shrouds away from the scooter body.
  2. Press the new shrouds into position.

CareCo (UK) Limited, 1 Turing Court, Great Notley, Braintree, CM77 7AT Tel: 0333 015 5000www.CareCo.co.uk

FAQ

Q: Can I use a different screwdriver than a Pozi screwdriver?

A: It is recommended to use a Pozi screwdriver for optimal compatibility and performance.

Q: Are replacement shrouds included with the product?

A: Replacement shrouds are not included. They need to be purchased separately.

Replacing the Shrouds

Difficulty Level ****

  • You will need:
    • 1x Pozi Screwdriver (Not Included)

FRONT SHROUDS

CareCo-MS08050027-X-GO-TravelPro-Folding-Travel-Mobility-Scooter-
FIG-2

  1. Using a Pozi screwdriver, unscrew the front shrouds from the scooter body, then lift them away from the scooter.
  2. Place the new shrouds into position, then secure them in place using a Pozi screwdriver.

SIDE SHROUDS

CareCo-MS08050027-X-GO-TravelPro-Folding-Travel-Mobility-Scooter-
FIG-3

  1. Using a Pozi screwdriver, unscrew the side shrouds from the scooter body, then lift them away from the scooter.
  2. Place the new shrouds into position, then secure them in place using a Pozi screwdriver.

REAR SHROUDSCareCo-MS08050027-X-GO-TravelPro-Folding-Travel-Mobility-
Scooter-FIG-4

  1. Pry the rear shrouds away from the scooter body.
  2. Press the new shrouds into position.
  • CareCo (UK) Limited, 1 Turing Court, Great Notley, Braintree, CM77 7AT
  • Tel: 0333 015 5000www.CareCo.co.uk

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals