TORMEK MB-100 Multi Base Instructions

TORMEK MB-100 Multi Base

Product Information

Specifications

• Product Name: MB-100 Multi Base
• Compatibility: Tormek Diamond Wheels
• Adjustable Joint: Yes
• Mounting Options: Vertical and Horizontal
• Compatible Tormek Jigs: KJ-45 Centering Knife Jig, KJ-140 Wide Centering Knife Jig, SVM-45 Knife Jig, SVM-140 Long Knife Jig, SVM-00 Small Knife Holder, SVX-150 Scissors Jig, SVA-170 Axe Jig, SVS-38 Short Tool Jig, SVD-186 R Gouge Jig, SVS-50 Multi Jig, SE-77 Square Edge Jig, SVD-110 Tool Rest
• Not suitable for grinding stones

Product Usage Instructions

• Positioning of Machine
  When using the MB-100 Multi Base, it can be mounted either horizontally or vertically depending on your preference.

• Sharpening Position
  The sharpening position can be adjusted when the MB-100 is mounted vertically or horizontally. This adjustment does not affect the angle setting.

• Setting with the updated WM-200
  Use the top angle scale marked with “MB-100” to set the desired angle.

• Setting with the previous version of WM-200
  Refer to the user manual of the previous version of WM-200 for instructions on setting the desired angle.

• Micro Adjust
  The edge angle is set using the Micro Adjust on the Universal Support. Other settings on the MB-100 do not affect the angle.

Sharpening
Below are examples of sharpening different tools using specific jigs:

• Sharpening a chisel with the SE-77 jig
• Sharpening a knife with the SVM-45 jig
• Sharpening a V-tool with the SVS-38 jig

When using the MB-100 Multi Base for sharpening, it is recommended to work closer to the Diamond Wheel for better control. Adjust the height of the machine if necessary or sit down while sharpening.

FAQ

1. Can the MB-100 Multi Base be used with grinding stones?
   The MB-100 is specifically designed for sharpening with Tormek Diamond Wheels and is not suitable for grinding stones.

PATENT
To see all patents visit tormek.com/patents

MB-100 Multi Base

• With the MB-100, you can sharpen on the side of Tormek’s Diamond Wheels to achieve a flat grinding bevel.
• Can be used with the Tormek jigs for knives, axes, woodturning tools, carving tools, chisels and plane irons.
• Can be used in both the horizontal and vertical locations.
• Fully adjustable so you can find the optimal position for each tool.

Positioning of Machine

• With the MB-100 Multi Base, you can sharpen on the side of the Tormek Diamond Wheels, thus creating a completely flat bevel that is preferable in some applications. The MB-100 has an adjustable joint that allows you to fix the sharpening position based on the opti-mal setting for each tool and jig. For convenience, the MB-100 can be mounted either vertically or horizontally.
• The MB-100 Multi Base can be used with the Tormek jigs: KJ-45 Centering Knife Jig, KJ-140 Wide Centering Knife Jig, SVM-45 Knife Jig, SVM-140 Long Knife Jig, SVM-00 Small Knife Holder, SVX-150 Scissors Jig, SVA-170 Axe Jig, SVS-38 Short Tool Jig, SVD-186 R Gouge Jig, SVS-50 Multi Jig, SE-77 Square Edge Jig and SVD-110 Tool Rest.

Note The MB-100 is only designed for sharpening with Tormek Diamond Wheels. It is not suitable for grinding stones as they would require truing which is not possible on the side.

Sharpening position

• With the vertical and horizontal mounting, the sharpening position can be adjusted. This will never affect the angle setting.
• Move the locking knobs and mount on any side of the Multi Base to facilitate locking in the vertical and horizontal positions.

Setting the Sharpening Angle

When setting the sharpening angle with the updated WM-200 AngleMaster, use the top angle scale, marked with MB-100 (1). When setting the sharpening angle with the previous WM-200, add 18° to your preferred angle (2). For example, if you are going the sharpen a chisel to a 25° angle, add 18° on the AngleMaster, i.e. 43°. Always set the wheel diameter compensator on WM-200 to 250 mm when sharpening with the MB-100.

1. Setting with the updated WM-200
2. Use the top angle scale, marked with MB-100.
3. Setting with the previous version of WM-200
4. Add 18° to your preferred angle.

Micro Adjust

The edge angle is set by using the Micro Adjust on the Universal Support. Other settings on the MB-100 does not affect the angle.

Sharpening

• Example shows sharpening a chisel with the SE‑77 jig.
• Example shows sharpening a knife with the SVM-45 jig.
• Example shows sharpening a V-tool with the SVS-38 jig.

Tip When sharpening with MB-100 Multi Base, it can be beneficial to work closer to the Diamond Wheel for better control. Try and adjust the height of the machine if necessary or sit down when sharpening.

References

• Tormek Patents - Tormek

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>