GRIFFON B-25 Fast, Thixotropic ABS Cement Owner’s Manual

B-25
FAST, THIXOTROPIC ABS CEMENT

PRODUCT DESCRIPTION

Fast, thixotropic ABS cement.
FIELD OF APPLICATION
For joining pipes, sockets and fittings with interference fit and loose fit (gap filling) in pressure and drainage systems. Suitable for diameters ≤ 315 mm. Max. 15 bar (PN 15). Maximal tolerances 0.6 mm diametrical clearance / 0.2 mm press fit.
Suitable for e.g. pipe systems conforming to EN 1455 and ISO 15493 (ABS). PROPERTIES

• Fast
• Thixotropic
• Gap filling

**CERTIFICATES & STANDARDS

**

Certificates

| Adhesive for non-pressure thermoplastic piping systems in installations for the transport/disposal/storage of water (EN 14680).
---|---
| Adhesive for thermoplastic piping systems for fluids under pressure in installations for the transport/disposal/storage of water (EN 14814).
| WRAS: Approved for drinking water. WRAS certificate (BS 6920).
| Adhesive for non-pressure thermoplastic piping systems in installations for the transport/disposal/storage of water (EN 14680).
| Adhesive for thermoplastic piping systems for fluids under pressure in installations for the transport/disposal/storage of water (EN 14814).

Standards

| EN 14680: Meets requirements European standard 14680: Adhesive for non- pressure thermoplastic piping systems.
---|---
| EN 14814: Meets requirements European standard 14814: Adhesive for thermoplastic piping systems for fluids under pressure.

PREPARATION
Working Conditions:! Do not use in temperatures ≤ +0°C.
APPLICATION
Coverage: Indication of the number of joints per 1 L: Directions for use:!

1. Cut pipes square, chamfer edges and deburr. 2. Clean surfaces with Griffon Cleaner and Cleaner Cloth. 3. Apply adhesive rapidly and evenly lengthways on both surfaces (pipe thickly, socket thinly). 4. Assemble joint immediately. Remove excess adhesive. Do not load the joint mechanically for the first 10 minutes. Close packaging immediately after use. Stains/residue:! Remove adhesive stains with Griffon Cleaner and Cleaner Cloth.

Our advice is based on extensive research and practical experience. However, in view of the large variety of materials and the conditions under which our products are applied, we assume no responsibility for the results obtained and/or any damage caused by the use of the product. Nevertheless, our Service Department is always at your disposal for any advice needed.

TECHNICAL SPECIFICATIONS

the gap width, drying time,
pressure, temperature, type and concentration of medium. The adhesive joint generally has the same chemical resistance as the material itself. Exceptions to
this are a small number of very aggressive chemicals such as concentrated inorganic acids, caustic solutions and strong oxidants.
Colour:| Grey
Density approx.:| 0.89 g/cm³
Flash point:| K1 (<21°C)
Solid matter approx.:| 25%
Viscosity:| Thixotropic

• Curing time may vary depending on a.o. surface, product quantity used, humidity level and ambient temperature.
  STORAGE CONDITIONS
  Shelf life: At least 24 months after production.
  Stored in unopened packaging between +5°C and +25°C.
  Best Before Date (MM/YY): see packaging. Close packaging properly after use and store in a dry, cool, and frost-free location.
  Limited shelf life after opening.

Bison International B.V. – P.O. Box 160 – NL 4460 AD Goes
www.griffon.eu

References

• Griffon | The choice of the pro

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>