LEGENDS REVO ARC Billet External Mount Kit Instruction Manual

LEGENDS REVO ARC Billet External Mount Kit

Specifications

• Product Name: Billet External Mount Kit
• Fitment: 2014-2023 Harley-Davidson FLH Touring Models

Product Usage Instructions

Step One: Install Shocks
 Install the shocks according to the instructions provided with your Legend Suspensions Revo-ARC kit.

Step Two: Install Support Arms

• Identify the LH and RH reservoir support arms as shown in FIGURE A.
• Remove the fender strut bolts as shown in FIGURE B.
• Apply blue threadlocker to the provided mounting screws.
• Mount reservoir support arms to the fender strut as shown in FIGURE C & D using the notes and images provided for your specific year, model, and configuration.
• Torque the 5/16-18 mounting screws to 22 ft-lbs..

FAQ:
Q: Where can I find more information about the product?
A: For more information, visit www.legendsuspensions.com
Q: How do I access product install guides and warranty information in different languages?
A: Scan the QR code provided with the product to access install guides and warranty information in your selected language.

BILLET EXTERNAL MOUNT KIT FITMENT: 2014-2023 HARLEY-DAVIDSON
FLH TOURING MODELS

INSTALL INSTRUCTIONS

1. STEP ONE: INSTALL SHOCKS

2. Install the shocks according to the instructions provided with your Legend Suspensions Revo-ARC kit.

3. STEP TWO: INSTALL SUPPORT ARMS

   • Identify the LH and RH reservoir support arms as shown in FIGURE A.
     Remove the fender strut bolts as shown in FIGURE B.

   • Apply blue threadlocker to the provided mounting screws.

   • Mount reservoir support arms to the fender strut as shown in FIGURE C & D using the notes and the images provided below and on the next page for your year, model, and configuration.

   •  Torque the 5/16”-18 mounting screws to 22 ft-lbs.

4. STEP THREE: INSTALL RESERVOIRS

   • Identify the LH and RH reservoir clamps as shown in FIGURE E.
   • Choose your preferred reservoir orientation, (COMPRESSION ADJUSTER FACING UP OR DOWN)
   • Install the clamps onto reservoirs and center them as shown in FIGURE F.
   • Apply blue threadlocker to the provided pinch screws and start them in the clamps. (DO NOT TIGHTEN AT THIS TIME)
   • Route the reservoir hoses over the top of the fender struts and on the backside of the reservoir support arms with a 180 degree loop, placing them into the built in hose guides as shown in FIGURE G.
   • Apply blue threadlocker to the provided mounting screws and mount the reservoir clamps to the support arms.
   • Inspect and verify that there are no kinks in the hoses before tightening as shown in FIGURE H.
     Torque the 1/4”-20 pinch screws to 10 ft-lbs and the 5/16”-18 mounting screws to 22 ft-lbs.

5. CONFIGURATION #1
   2014-2020 Models – mounting WITHOUT a solid mount tour pack or WITHOUT the 4-point docking hardware. (plastic insert remains installed in the fender strut)
   2014 to 2023 Models – mounting WITH the 4-point dock- ing hardware installed.
   add (1) of the included .058” washers to each rear mounting screw

6. CONFIGURATION #2
   2021 to 2023 Models – mounting WITHOUT a solid mount tour pack or WITHOUT the 4-point docking hardware installed.
   (rubber insert remains installed in the fender strut)

WARRANTY

All Legend ® Suspensions’ parts are guaranteed to the original purchaser to be free of manufacturing defects and workmanship. Parts that fail to conform to these conditions will be repaired or replaced at Legend ® Suspensions’ option if the parts are returned to Legend ® Suspensions by the original purchaser. Delivery of the original purchase invoice or receipt along with the part to Legend ® Suspensions is a condition precedent to Warranty coverage. Warranty coverage is limited lifetime.
In the event the original purchaser believes warranty service is required, the original purchaser must call or e-mail Legend ® Suspensions immediately to discuss the concern. Some concerns may be rectified by a telephone call and need no further course of action.
A part that is suspect of being defective must not be replaced by a Dealer or any other person without prior written authorization from Legend ® Suspensions. If it is deemed necessary for Legend ® Suspensions to make an evaluation of the part to determine whether a defect exists, a return authorization number (RA#) must be obtained from Legend ® Suspensions by the original purchaser. Properly obtaining a return authorization number from Legend ® Suspensions is a condition precedent to Warranty coverage.
The part must be packaged properly so as to not cause further damage and be returned prepaid to Legend ® Suspensions with a copy of the original invoice or receipt of purchase. If after evaluation, Legend ® Suspensions finds the part to be defective, Legend ® Suspensions will repair or replace the part, at the discretion and option of Legend ® Suspensions.

Exclusions
This warranty is void if:

1. the Legend ® Suspensions’ part is repaired, modified or altered, unless such repair, modification or alternation is expressly authorized by Legend ® Suspensions in writing;
2.  the Legend ® Suspensions’ part becomes defective in whole or in part as a result of improper installation, improper maintenance, improper use, abnormal operation, or any other misuse or mistreatment of the Legend ® Suspensions’ part;
3. the Legend ® Suspensions’ part is installed or used in any motorcycle or other vehicle other than an Unmodified Factory OEM Motorcycle;
4. the Legend ® Suspensions’ part is installed or used on any motorcycle or other vehicle being used in any form of competitive riding or racing, off road riding, or stunt riding. Stunt riding shall include, but not be limited to, any form of acrobatic maneuvering of the motorcycle, wheelies, stoppies, burnouts, jumping, or operating the motorcycle at an excessive rate of speed;
5. the Legend ® Suspensions’ part is installed or used on any motorcycle or other vehicle being operated at a speed in excess of the speed allowed by any applicable law, regulation, or ordinance or is operated in any other manner in violation of any applicable law, regulation or ordinance;
6. the serial or parts identification number of the Legend ® Suspensions’ part is defaced or missing;
7. the Legend ® Suspensions’ part is returned with no authorization number issued from Legend ® Suspensions; or
8. the original purchase invoice or receipt is not provided to Legend ® Suspensions along with the part.

Additional Limitations

1. Legend ® Suspensions shall have no warranty or liability obligation to cover work shop labor charges incurred to install or remove suspension systems or individual components.
2. Electrical components are limited to a two-year manufacture’s warranty from the original invoice date or installation.
3. Limited lifetime warranty as used within this warranty is further defined as the lifetime of the specific product line. Any product line that has been discontinued for which replacement parts are no longer available by is not covered by this warranty.
4. The customer is liable for shipping charges to and from Legend ® Suspensions for warranty repairs or replacement parts consistent with this warranty. LEGEND ® SUSPENSIONS (INCLUDING ITS SUBSIDIARIES, AFFILIATES, OFFICERS, DIRECTORS, EMPLOYEES, AGENTS OR SHAREHOLDERS) SHALL NOT, UNDER ANY CIRCUMSTANCES, WHETHER AS A RESULT OF BREACH OF CONTRACT, BREACH OF WARRANTY, TORT, STRICT LIABILITY, THE FAILURE TO DELIVER, DELAY IN DELIVERY IN NONCONFORMING CONDITION, OR FOR ANY OTHER BREACH OF CONTRACT OR DUTY BETWEEN LEGEND ® SUSPENSIONS AND A CUSTOMER OR OTHERWISE, BE LIABLE FOR CONSEQUENTIAL, INCIDENTAL, SPECIAL OR EXEMPLARY OR PUNITIVE DAMAGES INCLUDING, WITHOUT LIMITATION, LOSS OF PROFITS OR REVENUES, LOSS OF OTHER GOODS OR ASSOCIATED EQUIPMENT OR DAMAGES

• TO ANY ASSOCIATED EQUIPMENT, COST OF CAPITAL OR LABOR, COST OF REPLACEMENT OR SUBSTITUTE PRODUCTS, OR LOSS OF TIME. IN THE EVENT THAT LEGEND ® SUSPENSIONS SHALL BE UNABLE TO REPAIR OR REPLACE THE PRODUCT AS REQUIRED HEREIN, THE LIABILITY OF LEGEND ® SUSPENSIONS TO YOU OR ANY OTHER PARTY SHALL NOT EXCEED THE PRICE ACTUALLY PAID BY YOU FOR THE PRODUCT, UPON THE PAYMENT OF WHICH, LEGEND ® SUSPENSIONS SHALL BE RELEASED FROM AND

• DISCHARGED OF ALL FURTHER OBLIGATIONS AND LIABILITY TO YOU.
  THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.

• WARNING: Legend ® Suspensions recommends this system be installed by a professional technician with professional knowledge of disassembly / reassembly procedures and post installation checks. Legend ® Suspensions are designed to be installed and used on Unmodified OEM Motorcycles only. Legend ® Suspensions assumes no responsibility for damage or injuries which may result from the use or installation of its products, whether or not properly installed or used. Installing a Legend ® Suspension may decrease initial ground clearance when in lowered position. The motorcycle will be lower to the ground and care should be taken to avoid bottoming out, especially over bumps or in turns. To maintain proper balanced geometry, we recommend riding in the stock height position.

Dispute Resolution

You agree that any dispute between you and Legend ® Suspensions arising hereunder will be resolved exclusively and finally by arbitration administered by the American Arbitration Association (“AAA”) and conducted under its rules, except as otherwise provided below.
The arbitration will be conducted before a single arbitrator and will be limited solely to the dispute between you and Legend ® Suspensions. The arbitration shall be held at any reasonable location in Meade County, South Dakota, or by submission of documents, by telephone, online or in person. Any decision rendered in such arbitration proceedings will be final and binding on each of the parties, and judgment may be entered thereon in any court of competent jurisdiction. Should either party bring a dispute in a forum other than AAA, the arbitrator may award the other party its reasonable costs and expenses, including attorney fees and disbursements incurred in staying or dismissing such other proceedings or in otherwise enforcing compliance with this dispute resolution provision.

YOU UNDERSTAND THAT YOU WOULD HAVE HAD A RIGHT TO LITIGATE DISPUTES THROUGH A COURT, AND THAT YOU HAVE EXPRESSLY AND KNOWINGLY WAIVED THAT RIGHT AND AGREED TO RESOLVE ANY DISPUTES THROUGH BINDING ARBITRATION.
For the purposes of this section, the term “dispute” means any dispute, controversy, or claim arising out of or relating to: (1) this Agreement, its interpretation, or the breach, termination, applicability or validity thereof, or (2) the purchase or use of any Product, Accessory, service or otherwise from Legend ® Suspensions.
For purposes of this Agreement, the term Legend ® Suspensions means Legend ® Suspensions, its subsidiaries, affiliates, directors, officers, employees, beneficiaries, agents or assigns; the term “you” means you, the original purchaser, your agents, beneficiaries, or heirs.

Governing Law
Both you and Legend ® Suspensions consent to the application of the laws of the State of South Dakota to govern, interpret, and enforce all of your rights and Legend ® Suspensions’ rights, duties, and obligations arising from, or relating in any manner to, the subject matter of this Limited Lifetime Warranty, without regard to conflict of law principles.

OUR PRODUCTS ARE PROUDLY MADE IN THE USA
Please scan the QR code to access product install guides and warranty in your selected language.

Please scan the QR code to access product install guides and warranty in your selected language.

For customer service e -mail service@legendsuspensions.com
For additional help visit youtube.com/legendsuspensions

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>