ARGOX 49-21403-071 Desktop Bar Code Printer Installation Guide
- August 16, 2024
- ARGOX
Table of Contents
ARGOX 49-21403-071 Desktop Bar Code Printer
Specifications
- Model: OS-214EX Pro / OS-200 Pro
- Compliance: IEC 60950-1: 2005+A1: 2009, EN 60950-1: 2006+A11: 2009+A1: 2010+A12: 2011
- EMC: EN 55032: 2015+AC: 2016 (Class A), EN 55024: 2010 + A1: 2015
- Connectivity: Serial Port (RS232-C), USB Type A, USB Type B
Product Usage Instructions
Installation
- Ensure the device is placed on a stable surface.
- Connect the necessary cables – RS232, USB Type A, and USB Type B as per your requirement.
Media Setup
- Load the media/label roll into the designated compartment.
- Adjust the media guides to fit the width of the media.
Powering On
- Plug in the power cable to a suitable power source.
- Press the power button to turn on the device.
Printing:
- Ensure the printer driver is correctly installed on your computer.
- Send the print command from your computer to the printer.
FAQ:
-
Q: What should I do if the printer does not power on?
A: Check the power source and cable connections. Ensure the power button is pressed correctly. -
Q: How can I troubleshoot printing issues?
A: Make sure the media is loaded correctly and the printer driver is up to date. Check for any error messages on the printer display.
Assembly
-A- 1
- Ton Cover
- Power Indicator
- Ready Indicator
- Feed Button
- Power Switch
-B-
- Ethernet
- Serial Port (RS232-C)
- USB Tvoe Al
- 5 USB Type B
- wer Jack
-C-
- Ribbon Pick-up Holder
- Media Hanger
- Release Levers
– D –
- Ribbon Supply Holder
- Platen Roller
- Thermal Print Head
Loading Ribbon
Loadina Media
The user is cautioned that any changes or modifications not recommended by Argox Information Co. Ltd. could result in the loss of the user’s authority to operate the equipment. To ensure compliance, the users must use accessories and peripherals approved by Argox Information Co. Ltd.
Supplemental Information: This device complies with the requirement of FCC Part 15 Rules. Operation is subject to the following two Conditions:
- This device may not cause harmful interference and
- This device must accept any interference received, including interference that may cause undesired operation.
INDUSTRY CANADA NOTICE:
This device complies with Industry Canada ICES-003 class A requirements. Cet
equipement est conforme a ICES-003 classe A de la norm Industrielle Canadian
IEC 60950-1: 2005+A1: 2009
EN 60950-1: 2006+A11: 2009+A1: 2010+A12: 2011
EMC: EN 55032: 2015+AC: 2016,Class A
EN 55024: 2010 + A1: 2015
Argox Information Co., Ltd certifies that the following products and/or components are compliant with the current requirements of the European Union Restriction on the use of Hazardous Substances (RoHS) Directive, 2011/65/EU.
CAUTION: Risk of Explosion if Battery is replaced by an Incorrect Type. Dispose of Used Batteries According to the Instructions.
Argox Information Co., Ltd.
8F., No. 28, Baogao Rd., Xindian Dist.,
New Taipei City 231029, Taiwan (R.O.C.)
Tel: +886-2-8912-1121 Fax: +886-2-8912-1
https://www.argox.com
https://www.youtube.com/user/argoxmkt
Copyright © 2023. Argox Information Co.Ltd., All Rights Reserved.
- CP-2140EX Pro
- Equipment name
- Type designation (Type)
unit| Restricted substances and its chemical symbols
Lead (Pb)| Mercury (Hg)| Cadmium (Cd)| Hexavalent chromium (Cr+6)|
Polybrominated biphenyls (PBB)| Polybrominated diphenyl ethers (PBDE)
| －| ○| ○| ○| ○| ○
| －| ○| ○| ○| ○| ○
| ○| ○| ○| ○| ○| ○
| －| ○| ○| ○| ○| ○
| －| ○| ○| ○| ○| ○
- Note 1: “Exceeding 0.1 wt %” and “exceeding 0.01 wt %” indicate that the percentage content of the restricted substance exceeds the reference percentage value of presence condtion.
- Note 2: “○” indicates that the percentage content of the restricted substance does not exceed the percentage of reference value of presence
- Note 3：The “−” indicates that the restricted substance corresponds to the exempon.
Part No: 49-21403-071
Revision Date: Nov. 2023
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>