ARGOX CP-2140EX Pro Desktop Barcode Printer Installation Guide
- August 16, 2024
- ARGOX
Table of Contents
ARGOX CP-2140EX Pro Desktop Barcode Printer
Specifications:
- Model: CP-2140EX Pro / CX Pro Series
- Supported Connections: Serial Port (RS232-C), USB Type A, USB Type B
- Compliance: IEC 60950-1: 2005+A1: 2009, EN 60950-1: 2006+A11: 2009+A1: 2010+A12: 2011
- EMC Compliance: EN 55032: 2015+AC: 2016, Class A EN 55024: 2010 + A1: 2015
Product Usage Instructions
Lastning band
- Ensure the printer is powered off.
- Open the printer cover to access the ribbon cartridge.
- Insert the new ribbon cartridge following the directional arrows.
- Close the printer cover securely.
Lastning av papper
- Power off the printer.
- Open the paper tray or cover.
- Load the paper stack into the tray ensuring proper alignment.
- Close the paper tray/cover securely.
Etiket takma :
- Power off the printer.
- Open the label compartment.
- Insert the label roll according to the indicated direction.
- Close the label compartment securely.
FAQ:
-
Q: How do I dispose of used batteries?
A: Dispose of Used Batteries According to the Instructions provided in the manual to avoid risk of explosion. -
Q: What should I do if the printer encounters a paper jam?
A: If a paper jam occurs, power off the printer, open the cover, carefully remove the jammed paper, and then close the cover before powering on the printer again.
CP-EX Pro / CX Pro Series printers
Quick Installation Guide CP-2140EX Pro /
CP-3140EX Pro CX.2040 Pro / CX.2140 Pro / CX.3040 Pro / CX.3140 Prol
A
- Top Cover
- Power Indicator
- Ready Indicator
- Feed Button
- Power Switch
B
- Ethernet
- Serial Port (RS232-C)
- USB Type A
- USB Type B
- Power Jack
C
- Ribbon Pick-up Holder
- Media Hanger
D
- Ribbon Supply Holder
- Platen Roller
- Thermal Print Head
- Media Guide
Loading Ribbon
Loading Media
The user is cautioned that any changes or modifications not recommended by
Argox Information Co. Ltd. could result in the loss of the user’s authority to
operate the equipment. To ensure compliance, the users must use accessories
and peripherals approved by Argox Information Co. Ltd.
Supplemental Information : This device complies with the requirement of
FCC Part 15 Rules. Operation is subject to the following two Conditions:
- This device may not cause harmful interference and
- This device must accept any interference received, including interference that may cause undesired operation.
INDUSTRY CANADA NOTICE: This device complies with Industry Canada ICES-003 class A requirements.
-
IEC 60950-1: 2005+A1: 2009
-
EN 60950-1: 2006+A11: 2009+A1: 2010+A12: 2011
- EMC: EN 55032: 2015+AC: 2016, Class A
-
EN 55024: 2010 + A1: 2015
-
Argox Information Co., Ltd certifies that the following products and/or components are compliant with the current requirements of the European Union Restriction on the use of Hazardous Substances (RoHS) Directive, 2011/65/EU.
-
CAUTION: Risk of Explosion if Battery is replaced by an Incorrect Type. Dispose of Used Batteries According to the Instructions.
-
ATTENTION: Risque d’explosion si la batterie est remplacée par un type incorrect. Mettre au rebus les batteries usagées selon les instructions.
-
Argox Information Co., Ltd. 8F., No. 28, Baogao Rd., Xindian Dist., New Taipei City 231029, Taiwan (R.O.C.) Tel: +886-2-8912-1121 Fax: +886-2-8912-1124 https://www.argox.com https://www.youtube.com/user/argoxmkt
-
Copyright © 2023. Argox Information Co.Ltd., All Rights Reserved.
-
CP-2140EX Pro
-
Equipment name
-
Type designation (Type)
unit| Restricted substances and its chemical symbols
Lead (Pb)| Mercury (Hg)| Cadmium (Cd)| Hexavalent chromium (Cr+6)|
Polybrominat ed biphenyls (PBB)| Polybrominated diphenyl ethers (PBDE)
| －| ○| ○| ○| ○| ○
| －| ○| ○| ○| ○| ○
| ○| ○| ○| ○| ○| ○
| －| ○| ○| ○| ○| ○
| －| ○| ○| ○| ○| ○
- Note 1: “Exceeding 0.1 wt %” and “exceeding 0.01 wt %” indicate that the percentage content of the restricted substance exceeds the reference percentage value of presence condtion.
- Note 2: “○” indicates that the percentage content of the restricted substance does not exceed the percentage of reference value of presence
- Note 3：The “−” indicates that the restricted substance corresponds to the exempon.
Part No: 49-C2101-101 Revision Date: Nov. 2023