EPSON ELPMB68 Projector Ceiling Mount User Guide
- August 15, 2024
- Epson
Table of Contents
ELPMB68 Projector Ceiling Mount
Product Specifications
- Model: ELPMB68
- Type: Projector Ceiling Mount
- Part Number: V12H006AE0
- Email: info@euromet.com
- EM Number: 09058
Product Usage Instructions
Installation
- Position and securely fasten the ceiling plate to the ceiling.
- Insert the calibration device into the ceiling plate.
- Position the projector adaptor plate with adjustable arms on the bottom side of the projector.
- Secure the adjustable arm plate to the projector by positioning the plate’s screws with the designated holes on the bottom of the projector. Secure the projector to the ceiling mount with the two setscrews. Calibrate and position the Mount with the four adjustment
- knobs. In the case of heavy loads, use a hex key to calibrate the projector position.
- Tighten the four button screws to eliminate vibration or movement during operation.
Maintenance
- Do not try to service this product yourself, except as specifically explained in this User’s Guide. Refer all other servicing to qualified service personnel.
- HARDWARE’S INSPECTION: Regularly inspect all hardware components for any signs of wear or damage.
- CLEANING: Use a soft, dry cloth to gently wipe down the mount’s surfaces, removing any dust or dirt. For stubborn stains or dirt buildup, lightly dampen the cloth with water or a mild, non-abrasive cleaner. Avoid using harsh chemicals that may damage the mount’s finish. Ensure that the mount is completely dry before reattaching the projector to prevent any electrical issues.
- LUBRICATION OF MOVING PARTS (IF APPLICABLE): If the projector mount includes moving parts such as hinges or swivel mechanisms, apply a small amount of lubricant to ensuresmooth operation. Use a lubricant recommended by the manufacturer to prevent damage to the mount’s components.
CONCLUSIONS: By following this maintenance plan, you can keep your mount adapter and in optimal condition, prolonging their lifespan and ensuring reliable performance for your presentations or entertainment needs.
FAQ
Q: Can I install this ceiling mount by myself?
A: It is recommended to have at least two people for the installation process
to ensure safety and proper mounting.
User’s Guide
ELPMB68
Projector Ceiling Mount V12H006AE0
Safety Precautions
DANGER
- Failure to comply with these safety precautions results in death or serious injury;
- ELECTRICAL SHOCK HAZARD! Always turn off, disconnect, and disengage all power sources to the projector before servicing;
- Maximum projector weight limit is 45kg (99 lbs).
WARNING
Failure to comply with these safety precautions may result in serious injury.
- At least two qualified people should perform the installation procedure. Personal injury and/or property damage can result from dropping or mishandling the projector;
- If mounting to ceiling studs, make sure that the mounting screws are anchored into the center of the ceiling studs. Use of an edge-to-edge stud finder is recommended;
- Be aware of the mounting environment. If drilling and/or cutting into the mounting surface, always make sure that there are no electrical wires in the wall;
- Do not install near sources of high heat. Do not install on a structure that is prone to vibration, movement or chance of impact.
TOOLS INCLUDED
- 5 mm hex key;
Installation
-
Position and securely fasten the ceiling plate to the ceiling.
-
Insert the calibration device into the ceiling plate
-
Position the projector adaptor plate with adjustable arms on the bottom side of the projector.
-
Secure the adjustable arm plate to the projector by positioning the plate’s screws with the designated holes on the bottom of the projector.
Secure the projector to the ceiling mount with the two setscrews -
Calibrate and position the Mount with the four adjustment knobs.
-
In the case of heavy loads, use a hex key to calibrate the projector position.
-
Tighten the four button screws to eliminate vibration or movement during operation.
Maintenance
Do not try to service this product yourself, except as specifically explained in this User’s Guide. Refer all other servicing to qualified service personnel.
HARDWARE’S INSPECTION
The ELPMB68 projector ceiling mount does not require special maintenance, but
a visual inspection must be conducted before each installation involving the
system.
Please conduct a visual inspection to ensure that all screws are in the
correct positions and none are missing.
- Tighten any loose hardware as needed to maintain stability and prevent the risk of the projector falling or becoming misaligned.
- Ensure that screws, nuts and all components are not bent, damaged, or broken.
- Please use the appropriate tool to check that all screws are securely tightened.
- If any parts are broken or missing, please contact the seller to obtain the necessary spare parts.
CLEANING
Use a soft, dry cloth to gently wipe down the mount’s surfaces, removing any
dust or dirt. For stubborn stains or dirt buildup, lightly dampen the cloth
with water or a mild, non-abrasive cleaner. Avoid using harsh chemicals that
may damage the mount’s finish. Ensure that the mount is completely dry before
reattaching the projector to prevent any electrical issues.
LUBRICATION OF MOVING PARTS (IF APPLICABLE):
If the projector mount includes moving parts such as hinges or swivel
mechanisms, apply a small amount of lubricant to ensure smooth operation. Use
a lubricant recommended by the manufacturer to prevent damage to the mount’s
components.
CONCLUSIONS
By following this maintenance plan, you can keep your mount adapter and in
optimal condition, prolonging their lifespan and ensuring reliable performance
for your presentations or entertainment needs.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>