LED STRIPS K3Q-01 Light Strip with USB LED with Bluetooth User Manual
- June 9, 2024
- LED STRIPS
Table of Contents
LED STRIPS K3Q-01 Light Strip with USB LED with Bluetooth
Instruction
- Model： K3Q-01
- Rating(s)： DC 5V
The light strip can be connected to Bluetooth using available mobile phones to adjust the light color, brightness, etc., to increase the atmosphere
Software Overview
Overview
LotusLantern is a mobile APP to control LED strip by both Apple and Android
phones.
The traditional control ways like infrared, 433MHz, 2.4GHz and others old
wired ways will be replaced by mobile phone control way with convenient,
powerful and scalable features.
Through this mobile APP， you can not only control the color, brightness and
color temperature of the LED strips but
also set up all kinds of fancy flash mode； Also this APP can change the light
of the LED strip according to the rhythm of the music. This APP can set and
control several LED strips through Bluetooth and the operation is very simple,
easy to learn and easy to use.
Features
Adjust color LED strips with 60,000 colors to change color and brightness and
adjust monochrome LED stips to change brightness and color temperature
Play music or turn on a sound playback device, you can let the light change
the color and brightness with the rhythm of music, the music rhythm beautiful
- Inside multiple setting mode for color change and control LED strips without mobile
- Long distance control with omni-directional antenna, and many-to-many group control mode
- Once the connection is successful, connect automatically next time
Performance
LotusLantern APP is easy for use as well as great compatible for all kinds of smart phones; After the actual test of hundreds of mobile phones verification, the compatibility is above 95% of mobile phones in the market. APP is small and convenient, it consumes less system resources, so the requirements of the mobile configuration are low. Control delay is small, the operation feel good, light control is smooth with people’s visual sense.
Operating Environment
This APP program requires phones of system above Android 4.3 and iOS 8.0. Mobile phone configuration is not limited.
Instructions
Note: Android version and iOS version download and use the same method, here in the Android version as an example.
APP Download
Scan the QR code
iOS and Android systems can download the “LotusLantern” APP by scanning the QR
code. Open the browser or other tools with “Scan QR code” function, scan the
“LotusLantern” QR code as below:
App Operation
-
Click on the LotusLantern APP icon, enter the APP page:
-
After entering the APP interface, if Bluetooth is not enabled, “an application wants to enable the Bluetooth function of this device.” Click [Allow]
-
switch to color and brightness interface:
-
click to show the lamp list, view lamp list:
- Click to RGB manual adjustment view:
- switch to the mode interface:
- switch to the music rhythm interface:
- Switch to the online music interface:
- Switch to the microphone rhythm interface:
- Switch to the schedule interface:
- Switch to the modify pin sequence interface:
FCC warning
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>