ASTROPET Libra Series Pet Grooming Vacuum User Manual

ASTROPET Libra Series Pet Grooming Vacuum

FAQ

• Q: How often should I clean the filters of the Pet Grooming Vacuum?
  • A: It is recommended to clean the filters regularly, ideally after every few uses, to maintain optimal performance and suction power.
• Q: Can I use the Pet Grooming Vacuum on all types of pets?
  • A: The Pet Grooming Vacuum is suitable for most pets, but ensure that your pet is comfortable with the grooming process and the vacuum’s noise level before use.

Thank you for purchasing ASTROPET product. Before using this product, please read the user manual carefully. Please keep the user manual properly for future reference.

SAFETY INSTRUCTIONS

• This product may be used for domestic use only and may not be used for commercial or industrial purposes. This product should also not be used outdoors or in wet conditions.
• When using the product, please ensure that it is used in a safe environment and under the supervision of someone who understands the safe use of the product and its hazards. Never allow children or people with impaired thinking skills to use this product alone.
• Please take extra care when using this product near children and pets. Do not let children or pets play with this product.
• Dispose of all packaging materials properly. Keep away from children and pets.
• Do not use or store this product in wet places such as outdoors or in bathrooms.
• Please do not touch the power plug or this product with wet hands.
• Do not use this product to pick up wet hair or liquids.
• Please do not use this product if the power cord or power plug is damaged.
• Please do not disassemble this product by yourself. The wrong way of assembly may lead to electric shock or fire. Please contact us when you need repair services.
• Please do not use this product to pick up flammable or combustible liquids such as gasoline. Do not use this product to pick up high-temperature or highly flammable objects such as cigarettes, matches, hot soot, etc., otherwise it may cause fire and explosion.
• Do not use the product in or near environments where flammable or combustible gases or liquids are present.
• Please do not pull the power cord. Please do not put heavy objects on the top of the product.
• Please do not put your fingers or other body parts into the suction port, please do not put foreign objects such as plastic bags into the suction port to avoid injury or product failure.
• Do not use chemical products with aromatics and fragrances on the filter, otherwise there is a risk of fire.
• Please keep the dust cup and filter cleaned regularly. Use of dust cup and filter in filthy conditions may cause product failure or accidents.
• When cleaning and maintaining the product, be sure to disconnect the power supply and unplug the power cord before doing so. Otherwise, there is a risk of electric shock, accidents and injuries.
• This product has a function to stop operation when the temperature rises abnormally. If the motor heats up abnormally, be sure to stop the operation immediately. If the suction port is blocked, stop the operation, take out the dust cup, make sure the suction port and filter are clean, and restart it again after 60 minutes.
• Be sure to install and use the filter correctly. Using this product with the filter removed may cause product failure.
• Please pay attention to the sharp edge of the accessories, beware of scratches. The blade has been sharpened for some of the accessories (such as the de-shedding tool and electric clipper) due to functional needs. Please pay attention to safety when using the product.

Note: The flexible hose contain electrical wiring and should not be used to pick up water or be immersed in water for cleaning. Check the hose regularly and prohibit its use if it is damaged.

In the box

Vacuum Device

• Vacuum Device *1
• (One HEPA filter and one sponge filter have been pre-installed

Accessories

Product Overview

How to use

1. Connect the accessory and the vacuum device through the flexible hose. Please be careful to install the connectors at both ends of the hose tightly to avoid air leakage.
2. Plug the power cord of the vacuum device into a power socket.
3. Turn on the power switch of the vacuum device. Select a suction level as needed. There are three different suction levels as in low/medium/high.
   • Vacuum cleaners produce noise, so it is recommended that you start with the lowest suction level at the beginning, soothing your pet during use to avoid stress or fear. After your pet has adapted, adjust the suction power to a higher level as needed.

Note: Pay attention to the sharp edge of the accessories when using, beware of cuts.

How to use accessories

• Grooming Brush: It cleans the pet’s body of floating hair and the waste inside the coat, making the coat smoother and fluffier.
• Cleaning Brush: It can be used to clean pet hair or dust from clothes, sofas or carpets, and can also be used to clean pet’s paws.
• Deshedding Brush: It can be used to manually trim and clean up your pet’s matted, overgrown hair.

Note: Pay attention to the blade and sharp edge when using. Do not use excessive force to avoid causing scratches on your pet’s skin.

• Crevice Tool: It can be used to clean pet hair or dust that falls in the cracks of sofas and beds.
• Electric Clipper: It is used to finely trim pet hair and draw it into the dust cup. Trimming and grooming and vacuuming are solved at once.
• There is an independent power switch button on the electric clipper. After the vacuum device is turned on, you can control the electric clipper separately by this power button, which is more convenient to use.

Note

• The clipper is for trimming pet hair only.
• Please be careful with the soft parts of your pet’s skin and do not use excessive force to avoid causing scratches on your pet’s skin.

Guide Combs

According to the different length of the pet’s hair and different trimming and grooming needs, guide combs with different lengths can be replaced and used together with electric clipper. There are 3 guide combs in the package and each guide comb can meet the needs of two different sizes. Simply reverse the mounting direction of the guide comb when using.

Note: Please keep the guide combs in a safe place when not in use to prevent loss.

How to maintain

Dust cup maintenance

1. Lift and remove the dust cup slightly in the direction of the arrow.
2. Push the snap to open the dust cup and empty it.
3. Install the dust cup in the direction of the arrow.

Notes:

• Be careful when removing and installing the dust cup.
• If the removed dust cup is cleaned by water, remember to wait until the dust cup is completely dry before installing it to prevent electric shock or damage caused by water in the motor.

HEPA filter maintenance

1. Remove the dust cup and take out the HEPA filter.
2. Please wash it with tap water and drain the water after washing.
3. Place it in a well-ventilated place for at least 24 hours and leave it to dry sufficiently.
4. Install the HEPA filter back in place after it is completely dry. Be sure to install the HEPA filter before using the vacuum device.

Notes:

• Please clean the HEPA filter regularly according to the frequency of use and dirt condition.
• Remember to disconnect the power supply and unplug it from the socket when cleaning.
• Be sure to install the HEPA filter after it is completely dry, otherwise it may cause electric shock and product failure.

Sponge filter maintenance

1. Remove the dust cup and take out the sponge filter.
2. Please wash it with tap water and drain the water after washing.
3. Place it in a well-ventilated place for at least 24 hours and leave it to dry sufficiently.
4. Install the sponge filter back in place after it is completely dry. Be sure to install the sponge filter before using the vacuum device.

Notes:

• Please clean the sponge filter regularly according to the frequency of use and dirt condition.
• Remember to disconnect the power supply and unplug it from the socket when cleaning.
• Be sure to install the sponge filter after it is completely dry, otherwise it may cause electric shock and product failure.

Electric clipper maintenance

1. Remove the cutter head in the direction shown by the arrow.
   • Note: The cutter head is very sharp, please be careful not to cut your hand.
2. The suction port of the flexible hose can be used to pick up the hair and dust from the cutter head and cutter holder.
3. After using for a period of time, you can add an appropriate amount of razor lubricant to the head (not included in the package).

Note: The electric clipper is not waterproof, please do not flush it under water to avoid damage.

Flexible hose storage

• Wrap the flexible hose clockwise around the base of the vacuum device. The hose suction port can be fixed on the side of the vacuum device by magnetic connection.

Power cord storage

• The power cord can be wrapped around and stored in the slot at the bottom of the product.

Common Troubleshooting

Frequently Asked Questions

|

Possible causes of failure

|

Suggested solutions

---|---|---

The product can not be powered on.

|

The power cord is not plugged in or there’s no power to the socket.

| Check if the power cord is plugged in and is the socket has power.

Low suction power.

|

The hose is blocked.

| Clean the suction ports at both ends of the hose to ensure that there are no foreign objects blocking it. Avoid tangling and knotting the hose when using.
The dust cup is full.| Empty the dust cup.

The HEPA filter or sponge filter is too filthy.

|

Clean the HEPA filter or the sponge filter.

Dust cup or accessories are not properly installed.

|

Check if the dust cup or accessories are in place according to the user manual.

Comb-type accessories are clogged with hair.

| Promptly clean comb-type accessories by removing the hair.

Note: If the above methods do not solve the issue, please stop using the product and contact the after-sales service for assistance.

Product main specifications

Declaration of Conformity

EU Declaration of Conformity

• Product description: Pet Grooming Vacuum
• Type designation(s): Libra Series
• Trademark: ASTROPET

Hereby we,

• Name of company: CTG China Trading GmbH
• Address: IMMENGARTEN 8,30926 SEELZE,GERMANY

declare under our sole responsibility that the product described above is in conformity with the relevant Union harmonization legislations: European Directive(Low Voltage Directive 2014/35/EU, Electromagnetic Compatibility Directive 2014/30/EU)

The following harmonized standards and/or other relevant standards have been applied,which included for Article 3.1a Health, Article 3.1b EMC, Article 3.1a Electrical Safety requirements:

• EN IEC 55014-1:2021
• EN IEC 55014-2:2021
• EN IEC 61000-3-2:2019+A1:2021
• EN 61000-3-3:2013+A2:2021
• EN 60335-1:2012+A11:2014+A13:2017+A1:2019+A2:2019+A14:2019+A15:2021
• EN 60335-2-2:2010 + A11:2012 + A1:2013
• EN 60335-2-8:2015+A1:2016
• EN 62233:2008

The performed the conformity assessment according to the European Directive, The laboratory issuing the report is Shenzhen NTEK Testing Technology Co., Ltd.

This declaration of conformity is issued under the sole responsibility of the manufacturer.

• On behalf of: CTG China Trading GmbH
• Date: April 1, 2023

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>