AgiiMan XD-80B Submersible Pump Instruction Manual

: August 14, 2024
: AgiiMan

Table of Contents

AgiiMan XD-80B Submersible Pump
INCLUDES
PARAMETERS
MAINTENANCE
USAGE
PRODUCT DIMENSIONS
FEATURES
SETUP GUIDES
TROUBLESHOOTING
FREQUENTLY ASKED QUESTIONS
VIDEO – PRODUCT OVERVIEW
Read User Manual Online (PDF format)
Download This Manual (PDF format)

AgiiMan XD-80B Submersible Pump

INCLUDES

PARAMETERS

MODEL	POWER	H-MAX	Q-MAX	POWER CORD
XD-80B	120V/60Hz	3.2M	3000L/H	25FT

MAINTENANCE

lf the pump will be not used for the long term, please take the pump out of the water, let the pump work in the clean water for a moment, and then clean the parts of the pump and wipe clean.
lf the temperature is below 0℃, please take the water pump from the water immediately and discharge accumulation of water in the pump case the pump is broken because of freezing.

USAGE

Before using, take the pump fix it to a suitable outlet, and then connect it with the hose.
The sucker has a fixed and cushioning effect, please fix the suckers on the wall. If fixing the pump with the rope, it is no need to fix the sucker.
lt also can use the right sticks, and nails to fix the pump by fixing the holes of the bottom plate.
After fixing it firmly, you can connect with the appropriate power supply, and the pump start working.

CAUTION

Before using the pump, please make sure the rated voltage marked on the nameplate and the voltage of actual use is consistent.
When installing, removing, and cleaning the pump, you must unplug the power plug to ensure safety.
lf the pump has been in a serious collision, please check the pump, if broken, please stop using it immediately.
Not intended to be moved when plugged in or in operation.
The supply cord can be replaced if the cord is damaged and the appliance has to be scrapped.
Do not lift the pump by the power cord.
Please make sure the pump working in clean water.
Do not pump heated liquids with a temperature higher than 35℃.

PRODUCT DIMENSIONS

FEATURES

High Flow Rate: This pump can drain up to 850 gallons per hour, which is roughly twice as fast as a typical pool pump.
The submersible design increases adaptability by being appropriate for above-ground and inground pools.
Strong Copper Motor: This device has a powerful copper motor that guarantees steady operation while consuming less energy and producing the least amount of noise.
Sturdy Construction: Constructed with a robust ABS shell that is resistant to inclement weather.
Big Intake Screens: By allowing water to enter the pump from a wider area, four-sided mesh screens increase efficiency.
Built-in Temperature Control: When the pump runs empty, it automatically shuts off to prevent dry burning.
Comes with a 16-foot anti-twist drainage line that may be used with a variety of water nozzles.
Long Power Cord: To safely keep the pump out of the water and lower the risk of electric shock, it has a 25-foot power cord.
Compatibility: With its twisted 3/4″, 3/4″, and 1/2″ water nozzles, it can drain from any depth.
Maximum Water Temperature: Suitable for a variety of regions, it can withstand temperatures up to 95°F.
Waterproof Level: IPX8 rated, which completely protects against constant submersion in water.
Effective Filtering: To protect the pump and preserve water quality, the pump’s design has features that filter out contaminants.
Energy-efficient design preserves excellent performance while using less energy.
Low Noise Operation: Because of its copper motor and design, it operates silently.

SETUP GUIDES

Unpacking: Take the pump and any included parts out of the package. Verify every component to make sure nothing is broken.
Placement: Set the pump where the water needs to be drained or where you want the pool cover to be.
Linking the Hose: Connect the 16-foot drainage hose to the outlet of the pump. Make sure it’s firmly fastened to stop leakage.
Choosing Nozzles: Based on your drainage requirements, select the suitable nozzle (1/2″, 3/4″, or 3/4″ curved) and fasten it to the hose.
Connect the 25-foot power wire to an appropriate AC socket for electricity. Make sure there is no water exposure to the socket.
First Check: Make sure there are no obvious leaks or damages and that all connections are tight.
Power On: Activate the pump and watch it operate to make sure everything is functioning properly.
Hose Adjustment: Set the hose’s end in the desired drainage location to direct water flow.
Monitoring: Make sure the pump is operating well and keep an eye out for any possible problems by checking it on a regular basis.
Temperature Control: To prevent harming the pump, make sure the water temperature does not rise above 95°F.
Screen Inspection: Inspect the mesh screens for obstructions and, if required, clean them.
Dry Running: To avoid damaging the pump, do not operate it without water.
Safety Advice: To prevent electrical risks, make sure the power cable and connections are not submerged in water.
Regular Maintenance: To guarantee peak performance, clean and inspect the pump on a regular basis.
Storage: To extend the life of the pump, store it in a dry, cool area if it won’t be used for an extended amount of time.

TROUBLESHOOTING

Pump Not Starting: Verify that the socket is operational and that the power cord is plugged in correctly.
Low Water Flow: Check to make sure the nozzles and hose are not kinked or clogged.
If the pump appears to be running dry, make sure it is submerged in water or look for any leaks in the hose.
Unusual Sounds: Clean the intake screens and look for any debris or obstructions.
Overheating: Verify that the pump is not running dry and that the water temperature is within the permitted range.
Leakage: Check for leaks or damage at the hose connections and pump seals.
Problems with Power: Make sure the power outlet is operational by testing it with a different device.
Drain and clean the hose to make sure there are no obstructions obstructing the flow of water.
Pump Vibrations: Verify that the pump is stationary and not vibrating as a result of an uneven configuration.
Unpredictable Performance: Make sure the pump is not clogged or look for any problems with the power supply.
Water backflow: Verify that the hose is positioned correctly and free of any dips that can result in backflow.
Error Codes: For information on any particular error codes or lights, see the user handbook and proceed with the suggested troubleshooting procedures.
Temperature Control Failure: Verify that the integrated temperature control is operational and not broken.
Pump Shutting Off: Verify whether dry running or overheating is causing the pump to automatically shut off.

FREQUENTLY ASKED QUESTIONS

What style is the AgiiMan XD-80B Submersible Pump?

The style is 850GPH Blue.

What are the dimensions of the AgiiMan XD-80B Submersible Pump?

The dimensions are 5.5 inches in length, 4.5 inches in width, and 4.5 inches in height.

What is the power source for the AgiiMan XD-80B Submersible Pump?

The pump is powered by corded electric.

What is the maximum flow rate of the AgiiMan XD-80B Submersible Pump?

The maximum flow rate is 3217.6 liters per hour.

What is the maximum lifting height of the AgiiMan XD-80B Submersible Pump?

The maximum lifting height is 10.5 feet.

What voltage does the AgiiMan XD-80B Submersible Pump operate on?

The pump operates on 110 volts.

Who is the manufacturer of the AgiiMan XD-80B Submersible Pump?

The manufacturer is AgiiMan.

What is the weight of the AgiiMan XD-80B Submersible Pump?

The pump weighs 2 pounds.

What is the price of the AgiiMan XD-80B Submersible Pump?

The price is $38.99.

What is the model number of the AgiiMan Submersible Pump?

The model number is XD-80B.

How many adapters come with the AgiiMan XD-80B Submersible Pump?

The pump comes with 3 adapters.

What applications is the AgiiMan XD-80B Submersible Pump suitable for?

It is suitable for various applications such as fountains, ponds, and hydroponic systems.

How does the maximum flow rate of the AgiiMan XD-80B Submersible Pump benefit users?

The high flow rate of 3217.6 liters per hour provides efficient water movement, making it ideal for larger setups or systems requiring substantial water circulation.

What are the benefits of the 10.5 feet maximum lifting height of the AgiiMan XD-80B Submersible Pump?

The maximum lifting height allows the pump to effectively move water to higher locations, which is useful for applications where water needs to be pumped over a significant vertical distance.

Why is the water flow in my AgiiMan XD-80B Submersible Pump weak or intermittent?

Check if the pump is fully submerged and that there are no blockages in the intake or discharge. Clean the pump to remove any debris that may be obstructing water flow.