VIKING DTWS4849 Range Hoods Parts List Owner’s Manual
- August 14, 2024
- VIKING
Table of Contents
VIKING DTWS4849 Range Hoods Parts List
Product Specifications
- Model: VIKING DTWS4849
- Compatibility: VIKING Range Hoods
Product Usage Instructions
Assembly Instructions
- Refer to the provided parts list to ensure all components are available.
- Follow the step-by-step assembly guide provided in the manual.
- Secure each part using the appropriate installation hardware listed.
- Double-check all connections and fittings for stability.
Cleaning and Maintenance
- Regularly clean the VIKING DTWS4849 Range Hood using a mild detergent and a soft cloth.
- Avoid using abrasive cleaners that may damage the finish. Check for any clogs in the filters and remove them to maintain optimal performance.
Troubleshooting
- If the range hood is not functioning properly, check for loose connections, clogged filters, or any visible damage to the parts.
- Refer to the troubleshooting section of the manual for specific issues and solutions.
Parts Description
Ref # Part Number Qty. Description
1 | B2004681 | 48 REAR I/S PANEL |
---|---|---|
2 | B2007096 | 48 CONTR0L PANEL (DTWS4849) |
B2007097 | 48 CONTR0L PANEL (DTWS4849)XULTRAL | |
3 | B2004667 | I/S SIDE PANEL RH (DTWS/L/N DSWB) |
(BEFORE 5/12/05) | ||
B2007323 | I/S SIDE PANEL – RH | |
(AFTER 5/12/05) | ||
4 | B2005027 | I/S SIDE PANEL LH (DTWS/L/N DSWB) |
(BEFORE 5/12/05) | ||
B2007324 | I/S SIDE PANEL – LH | |
(AFTER 5/12/05) | ||
5 | B2004683 | FILTER SUPPORT FRONT/REAR |
6 | B2004685 | 48 FRONT I/S PANEL |
7 | G31010268 | FILTER ASSEMBLY (DESIGNER) 13.848 X 10.375 |
8 | N/A | HEAT SHIELD – MUST ORDER ITEM NO. 11 |
9 | PE050171 | SS DESIGNER BLOWER/LIGHT CONTROL |
10 | PA010089 | KNOB (DESIGNER SERIES HOOD) |
11 | PE050064 | LIGHT ASSEMBLY |
12 | PE050081 | 50 WATT HALOGEN BULB |
13 | PE020058 | RATING LABEL (ADHESIVE) |
14 | PF030337 | HOOD WARNING LABEL |
15 | PE070204 | HEYCO STRAIN RELIEF – 7-P2 |
16 | PE070205 | 3 PRONG FEMALE SUPPLY CORD |
17 | PE070196 | FEMALE SOCKET (2 PRONG) |
18 | PE070197 | MALE SOCKET (3 PRONG) |
19 | N/A | HEAT SHIELD – MUST ORDER ITEM NO. 11 |
20 | PE070385 | DWH48 WIRE HARNESS |
21 | PD020010 | 10 X 3/8 GREEN GROUNDING SCREW |
22 | PD030010 | NO.10-24 KEPS NUT |
23 | PD020087 | 10 X 1/2 PAN PH. TEK ZINC |
24 | PD020100 | NO.8 X 7/16 PHILLIP HD KNIFE SCREW |
25 | PD030059 | TINNERMAN CLIP |
26 | PD020032 | SRW-8(A)X3/8PH.WFR HD 7/16DIAXNICL |
27 | PC040010 | POP RIVET |
28 | PF030468 | COMPONENT WIRING LABEL |
29 | A2008139 | HOOD WIRE COVER (DTWS30/36/4249) |
NI | A2008149 | HOOD WIRE COVER (DTWS4849) |
30 | G3105021BK | 48“ DUCT COVER – TOP ASSY – BK (WIDTH – 17 29/32) |
G3105021BT | 48“ DUCT COVER – TOP ASSY – BT (WIDTH – 17 29/32) | |
G3105021GG | 48“ DUCT COVER – TOP ASSY – GG (WIDTH – 17 29/32) | |
G3105021SG | 48“ DUCT COVER – TOP ASSY – SG (WIDTH – 17 29/32) | |
G3105021SS | DUCT CVR TOP ASSY 18X12(DCWH/L4844) | |
G3105021WH | 48“ DUCT COVER – TOP ASSY – WH (WIDTH – 17 29/32) | |
31 | G3107301BK | 48““ DUCT COVER – BOTTOM ASSY – BK (WIDTH – 18) |
G3107301BT | 48““ DUCT COVER – BOTTOM ASSY – BT (WIDTH – 18) | |
G3107301GG | 48““ DUCT COVER – BOTTOM ASSY – GG (WIDTH – 18) | |
G3107301SG | 48““ DUCT COVER – BOTTOM ASSY – SG (WIDTH – 18) | |
G3107301SS | DUCT CVR BTM ASSY (DTWS4849) | |
G3107301WH | 48““ DUCT COVER – BOTTOM ASSY – WH (WIDTH – 18) | |
32 | PE030067 | 48 ACCESSORY RAIL BR |
PE030066 | 48 ACCESORY RAIL SS | |
33 | PE030053 | MIDDLE RAIL SUPPORT – BR |
PE030052 | SUPPORT TUBE, HOLE THROUGH | |
34 | PE030055 | END CAP – BR |
PE030054 | END CAP – SS | |
35 | PE030077 | BR S HOOKS REPL PV100012BR |
PE030076 | CHROME S HOOKS REPL PV100012SS | |
36 | PD020002 | 10 X 1/2 PH.TR.HD.SMS. |
37 | PD020009 | 10 X 1 PH. HD. PAN HD. SMS |
INSTALLATION HARDWARE – QTY. 6 | ||
INSTALLATION HARDWARE – QTY. 6 | ||
--- | --- | --- |
PD030010 | NO.10-24 KEPS NUT | |
INSTALLATION HARDWARE – QTY. 4 | ||
PD020010 | 10 X 3/8 GREEN GROUNDING SCREW | |
INSTALLATION HARDWARE – QTY. 1 | ||
PD010002 | 10-24 X 3/8 HEX W/HD M.S. | |
INSTALLATION HARDWARE – QTY. 4 | ||
PD020002 | 10 X 1/2 PH.TR.HD.SMS. | |
INSTALLATION HARDWARE – QTY. 6 |
Part
FAQ
Frequently Asked Questions
- Q: How often should I clean the range hood filters?
- A: It is recommended to clean the filters every 2-3 months, depending on usage frequency and cooking habits.
- Q: Can I replace the parts of the VIKING DTWS4849 Range Hood myself?
- A: Yes, you can replace the parts following the instructions provided in the owner’s manual. Ensure to use the correct part numbers for compatibility.
- Q: What should I do if the range hood motor is making unusual noises?
- A: Turn off the range hood immediately and inspect the motor for any obstructions or signs of damage. Contact customer support if the issue persists.
References
- Repair Your Grill: Shop Replacement Parts for 24,880 Models
- Viking Range Hoods Parts - Select From 411 Models
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>