Savio FROST X2, FROST X2 CPU Cooler User Manual

Savio FROST X2, FROST X2 CPU Cooler

Product Information

Specifications

• Product Name: FROST X2 / FROST X2 BLACK CPU cooler
• Producer: Elmak Sp. z o.o.
• Warranty: 24 months

Product Usage Instructions

1. Before starting the use of the purchased device, read the entire user manual.
2. Ensure that the product is compatible with your CPU model.
3. Follow the installation instructions provided in the manual carefully.
4. Connect the CPU cooler to the appropriate power source following the specified guidelines.
5. Regularly clean and maintain the CPU cooler to ensure optimal performance.

FAQ
Q: How long is the warranty period for the FROST X2 / FROST X2 BLACK CPU cooler?
A: The warranty period for the product is 24 months.
Q: What should I do if I need support or want to provide feedback?
A: For support or feedback, please contact us at support@savio.pl  Your feedback is valuable for product improvement.

User manual

• Thank you for choosing Savio product!
• If our product meets your expectations, share your opinion with other people on the portal center, social media or on the website of the store where you made the purchase. If you want to show our device on
• SAVIO Facebook Page, we will be very pleased.
• If there is something that we could improve on our products, please write to us at support@savio.pl
• Thanks to your feedback, we will be able to better adapt the product to your expectations

Before starting the use of the purchased device it is recommended to read the whole manual.

 Package content

Technical specification

• TDP: 125 W
• Cooler dimensions with fan: 122 × 76.5 × 157 mm
• Number of heat pipes: 2 pcs
• Fan size: 120 mm
• Fan connector: 4-pin (PWM)
• Fan speed: 800-1800 RPM
• Max. noise level: 31 dBA
• Intel compatibility: LGA 1200 / 1151 / 1150 / 1155 / 1156 / 1366 / 1700 / 2011 / 2066
• AMD compatibility: AM3(+) / AM2(+) / FM2(+) / FM1 / AM4 / AM5

Mounting the cooling system for INTEL series 1366 / 1700 / 115X | 1200

1. STEP 1

2. Place the mounting backplate on the back of the motherboard and adjust its ends to the series of your processor.

3. STEP 2

4. Dismantle fan

5. STEP 3

6. Install the appropriate mounting bracket for your processor series.

7. Secure it with the screws included in the kit.

8. STEP 4

9. Clean the processor IHS surface with a dry cloth or isopropyl alcohol.

10. Apply thermal grease (to get the lowest temperatures use SAVIO GLACIER thermal grease).

11. Remove protective fi lm from the heat sink base and clean it with a dry cloth or isopropyl alcohol.

12. STEP 5

13. Place the heat sink on the processor.

14. Secure the heat sink with the screws integrated in the mounting bracket.

15. STEP 6

16. Install the fan on the heat sink.

17. STEP 7

18. Connect the fan power connector to the socket marked as ‘CPU FAN’ on the motherboard.

Safety conditions for thermal grease

• Keep out of reach of children.

• It is forbidden to consume the product.

• In case of skin contact, the contaminated area should be wash with soap and water.

• In the case of contact with eyes, rinse with plenty of water.

• If vapours enter the respiratory system go to fresh air.

• In case of ingestion it is not necessary to induce vomiting.
  Rinse your mouth with plenty of water.

• In the case of any undesirable symptoms during the situations described above, seek urgent medical attention.

Safety conditions for heat sink and fan

• Use the product in accordance with its intended use, as improper use may damage the product.
• Do not expose the device to moisture.
• The device should be cleaned only with a dry cloth.
• Independent repairs and modification result automatic loss of the warranty.
• Hitting or dropping may damage the product.

Warranty

The warranty covers 24 months. Independent repairs and modifications result in automatic loss of the warranty.
Warranty card is available for download on our website: www.savio.pl/en/service

Information of the utilization of electrical and electronic equipment

This symbol indicates that electrical appliances should not be discarded with other household waste. Used equipment should be handed over to a local collection point for this type of waste or to a recycling center. Please contact your local authorities for infor- mation about disposal methods available in your area. Waste elec- trical equipment may contain hazardous substances (e.g. mercury, lead, cadmium, chromium, phthaltes) which can get into air, soil and groundwater when leaking from used appliances. Environmen- tal pollution with these substances leads to their bioaccumulation, causing lesion of disease in living organisms, which would pose a risk to human and animal health or life. Households may contri- bute to environmental protecion by proper waste collection. In such way, hazardous substances from the equipment are neutralized and valuable secondary raw materials are reused for production of new equipment.

www.savio.pl

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>