FOXWELL NT680 Plus Handheld Scanners User Guide

Table of Contents

FOXWELL-NT680-Plus-Handheld-Scanners-prodcut

Registering the Product:

Update the device and connect to WiFi.
Scan the QR code provided in the manual or visit https://www.foxwelltech.us to register.
Enter your email address, receive a verification code in your mailbox, and complete the registration process by creating a password.
After successful login, click the Submit button to complete product registration automatically or manually enter the correct serial number

Updating Software

Enter the Update section on the device and select an available WiFi network to connect.
Choose the software you want to update and click the Update or Select All button to begin downloading.
Wait for all selected software updates to finish downloading. A success message will confirm the installation of all software.

Visit the Foxwell website www.foxwelltech.us and press the Register icon, or go to the registration page by selecting Support from the home page and then click Register.
Enter one of your email addresses as your user ID and click the Send Code button. We will send a 4-digit verification code to the email you just entered. Find the security code in your mailbox, input the code, create a password, and click Free Registration to complete.
Sign in to the Member Center, click New Registration, input the right serial number, and click Submit to activate the product.
Enter Update and connect WIFI, then scan the QR code to register.
Scan the QR code and enter your email address. Click “Send code” to find the verification code in your mailbox.
Create a password and then click “Free registration” to complete.
After logging in successfully, click the Submit button to complete product registration when the serial number shows automatically, or manually input the correct serial number.

Locate the data link connector(DLC) under the dash on the vehicle’s driver’s side.
Connect the diagnostic cable to the scanner and plug it into the vehicle’s DLC.
Switch the ignition key to the ON position.
Go to the Main menu to choose diagnostic software to start the test.

To find the serial number: FOXWELL-NT680-Plus-Handheld-Scanners-
fig-4

Before starting the diagnosis, please make sure the:
- The ignition switch is turned to the ON position.
- The engine is off.
- The vehicle battery voltage is between 10-14 volts.
- The scanner is correctly connected to the vehicle.
Don’t connect or disconnect the equipment while the ignition is on or the engine is running.

FOXWELL-NT680-Plus-Handheld-Scanners-fig-5

FOXWELL-NT680-Plus-Handheld-Scanners-fig-7

Before updating, please make sure you have created a Foxwell ID and that your network works correctly.

Enter Update and select an available WIFI to connect.
Choose the software you wish to update and click the Update or Select All button to download.
When all are updated, an “All software aisdownloaded and installed successfully!” message displays.

scanner

Contact Us
For service and support, please contact us.

Q: How do I register the product via WiFi?
- A: To register the product via WiFi, update the device, connect to WiFi, scan the provided QR code, or visit the specified link, and follow the registration steps.
Q: How can I update the software on the device?
- A: To update the software, access the Update section on the device, connect to WiFi, select the software you wish to update and initiate the download process by clicking on Update or Select All.