FOXWELL NT301 OBD2 Handhell Scanners User Guide
- June 5, 2024
- Foxwell
Table of Contents
NT301 OBD2 Handheld Scanners
User Guide
To Register Through Website
| 1. Visit Foxwell’s
website www.foxwelltech.us and press the Register
icon, or go to the registration page by selecting Support from home page and
then click Register.
---|---
| 2. Enter one of
your email addresses as your user ID and click the Send Code button. We
will send a 4-digit verification code to the email you just entered. Find the
security code in your mailbox, input the code, create a password and click
Free Registration to complete.
| 3. Sign in to the
Member Center, click New Registration, input the right serial
number and click Submit to activate the product.
To Register Via Update Client
| 1. Visit our site
www.foxwelltech.us and then click Support at the
home page. Click Tools at the support page and find the product you have to
download the update client.
---|---
| 2. Unzip the
file and find the installer to install the updated client to your computer.
| 3. Click the
desktop icon to launch the update client and click the Register icon to create
a Foxwell ID.
| 4. Enter one of
your email addresses as your user ID and click the Send Code button. We will
send a 4- digit verification code to the email you just entered.
| 5. Find the
security code in your mailbox, input the code, create a password and click
Free Registration to complete.
| 6. Sign in to
your Foxwell account and select Activation. Input a serial number or click the
Read con to read the SN from the scanner. Click Activate button to activate.
Vehicle Connection
1. Locate the data link connector(DLC) under the dash on the driver’s side of
the vehicle.| 3. Switch the ignition key to the ON position.
---|---
2. Connect the diagnostic cable to the scanner and plug it into the vehicle
DLC.| 4. Go to the Main menu to choose diagnostic software to start the test.
Serial Number
To find the serial number:
Diagnostic Operation
-
Before starting diagnosis, please make sure:
1. The ignition switch is turned to ON position.
2. The engine is off.
3. The vehicle battery voltage is between 10-14 volts.
4. The scanner is correctly connected to the vehicle. -
Don’t connect or disconnect the equipment while the ignition is on or the engine is running.
Update
Before updating, please make sure you have created a Foxwell ID and your network works correctly.
| 1. Launch the update tool FoxAssist by double-clicking the
desktop icon and logging in with your Foxwell ID and password.
---|---
| 2. Connect the TF card to the computer with the TF
card reader provided.
| 3. Select Download then all the updates applicable
to your tool display. Click the check box(s) in front of the software you wish
to update and then click the Upgrade button to start updating.
To Print Test Results
Vehicle test results stored on the SD card can be printed through the computer.
Powering up the scanner
Before using the scanner, make sure to provide power to the scanner.
The unit operates on any of the following sources:
Contact Us
For service and support, please contact us.
WebSite: www.foxwelltech.us
E-mail: support@foxwelltech.com
Service Number : + 86 – 755 – 26697229
Fax: + 86 – 755 – 26897226
REGISTER YOUR PRODUCT AT
http://www.foxwelltech.us/register.html