DENON AVR-A10H Integrated Network Av Receiver User Guide

DENON AVR-A10H Integrated Network Av Receiver

Specifications

• Model: AVR-A10H
• Type: Integrated Network AV Receiver
• Power Supply: AC 120V, 60Hz
• Output Power: 100W per channel (8 ohms, 20Hz – 20kHz, THD 0.08%)
• Inputs: HDMI, LAN
• Outputs: HDMI (ARC/eARC)
• Supported Audio Formats: Dolby Atmos, Dolby TrueHD, DTS-HD, DTS:X

Product Usage Instructions

• Step 1: Connect the Antennas

1. Place the antenna evenly over the antenna terminal at the rear panel.
2. Turn the antenna clockwise until fully connected. Do not over tighten.
3. Rotate the antenna upwards for optimal reception.

• Step 2: Setup Connection
  If connecting to a wired network, use an Ethernet cable to connect between the AVR and your router. Skip this step for wireless connections.

• Step 3: Connect the Power Cord
  Place the AVR near your TV and connect the power cord.

• Step 4: Connect the AVR to Your TV
  Using a high-quality HDMI cable, connect one end to the HDMI port labeled eARC or ARC on your TV and the other end to the HDMI OUT TV 1 port on your AVR.

• What is ARC and eARC?
  Audio Return Channel (ARC) sends audio back to the AVR through the HDMI cable. Enhanced Audio Return Channel (eARC) provides support for high-quality audio formats like Dolby Atmos and DTS:X.

• Step 5: Turn on the TV
  Select the appropriate HDMI input on your TV using the remote control.

• Step 6: Install Batteries in the AVR Remote Control
  Turn on the AVR and press X on the remote control to verify the connection.

Frequently Asked Questions (FAQ)

• Q: What should I do if I encounter setup issues?
  A: If you encounter any setup issues, please refer to the Setup Assistant function or visit support.denon.com for assistance.

• Q: Can I use any HDMI cable for connection?
  A: For optimal performance, use a High Speed HDMI cable with Ethernet for 4K TVs and an Ultra High Speed HDMI cable for 8K TVs.

AVR-A10H
INTEGRATED NETWORK AV RECEIVER
Quick Start Guide

• Welcome
• Thank you for choosing a Denon AVR.
• Use the Setup Assistant function to help configure the settings for this unit when you first set it up. Follow the guidance displayed on the TV screen connected to this unit to configure the settings. This manual describes the procedure up until starting the Setup Assistant.

Please do not return this product to the store. If you need help…
Scan the QR code or visit support.denon.com/ for setup help, technical support, warranty assistance, or customer support contact information.

Before you begin

Required for setup

Optional

• When connecting this unit to a device that is compatible with the Deep Color, 4K, ARC and eARC functions, use a “High Speed HDMI cable with Ethernet” that displays the HDMI logo.
• When connecting this unit to a device that is compatible with 8K and 4K 120Hz video, use a certified “Ultra High Speed HDMI cable”. If you use a different HDMI cable, the video may not display or  other problems may occur.

What’s in the box

The included sound calibration microphone stand is convenient for performing speaker calibration. Using your own tripod or the supplied Sound calibration microphone stand enables settings to be automatically configured to the optimum listening environment, providing exceptionally high performance.

Attach the included cable labels

• The supplied cable labels include labels for the speaker and HDMI cables.
• Attach a cable label to each cable that matches the speakers and HDMI devices being connected, as shown below. This makes it easy to identify and properly connect the cables between your components.

Setup

Connect the antennas

1. Place the antenna evenly over the antenna terminal located at the upper left or right corner of the rear panel.
2. Turn the antenna clockwise until it is fully connected. Do not over tighten.
3. Rotate the antenna upwards for the best possible reception.

• Optional
  If you are connecting the AVR to a wired network, connect an Ethernet cable (not included) between the AVR and your router. Do not connect the Ethernet cable if you are connecting the AVR to a wireless network.

•  The antennas are required for both Bluetooth and Wi-Fi functions.

Connect the power cord

• Place the AVR near your TV and connect the power cord.

Connect the AVR to your TV

• Using a high quality HDMI cable*, connect one end to the HDMI port labeled “eARC” or “ARC” on your TV. Connect the other end to the HDMI OUT TV 1 port on your AVR.

• What is ARC and eARC?
  

• Audio Return Channel or “ARC” sends audio back to the AVR using the same HDMI cable that sends video from your AVR  to your TV. This allows your AVR to process the sound from your TV’s built-in tuner and apps. TVs with an Enhanced Audio Return Channel or “eARC” port provide additional support for high bitrate multichannel audio (Dolby Atmos, Dolby TrueHD, DTS-HD and DTS:X). Please refer to your TV owner’s manual for details about eARC support for your particular model.

  • For 4K TVs, we recommend using an HDMI cable labeled “High Speed” and “with Ethernet” .
  • For 8K TVs, we recommend using an HDMI cable labeled “Ultra High Speed”.

• Turn on the TV

• Select the appropriate HDMI input on your TV

• Install batteries in the AVR remote control

• Turn on the AVR

  •  Press  on the remote control.

• Verify the connection

  • Verify that you can see this screen on your TV.
    

  • If this screen is not displayed, please go back and retry the steps again in the recommended sequence.

  •  In case the unit was already setup back in time the Setup Assistant won’t start automatically and you only see the Denon logo on screen. In such case you can access the Setup Assistant by pressing SETUP on the remote control and selecting Setup Assistant from the menu.

• Follow the on-screen Setup Assistant

  • The TV is now connected to the AVR.
    The Setup Assistant will walk you through connecting and configuring your speakers and components to your Denon AVR. Use the remote control and follow the instructions on the TV screen to complete the AVR settings using the Setup Assistant.

Firmware update

If you see this screen after completing Setup Assistant, select Update Now to make sure your new AVR is up to date with the latest firmware and features.

Download the mobile apps

• Download both the “HEOS” app and the “Denon AVR Remote” app for the full home entertainment experience. The HEOS app is required to access online music through your AVR.

• HEOS app
  The HEOS app allows you to explore, browse, and play music from many online streaming services or from your own music library.

• Denon AVR Remote
  Control your new AVR with the latest Denon AVR Remote app.

• Owner’s manual
  Refer to the online manual for other functions, information and operation procedure details. manuals.denon.com/AVRA10H/NA/EN/

• For more information, visit www.denon.com

Trademark information

• The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by DEI Sales, Inc. is under license. Other trademarks and trade names are those of their respective owners.
• Dolby, Dolby Vision, Dolby Atmos, and the double-D symbol are registered trademarks of Dolby Laboratories Licensing Corporation. Manufactured under license from Dolby Laboratories. Confidential unpublished works. Copyright © 2012-2024 Dolby Laboratories. All rights reserved.
• For DTS patents, see http://patents.dts.com. Manufactured under license from DTS, Inc. DTS, DTS:X, and the DTS:X logo are registered trademarks or trademarks of DTS, Inc. in the United States and other countries. © 2021 DTS, Inc. ALL RIGHTS RESERVED.
• The Wi-Fi CERTIFIED logo is a registered trademark of the Wi-Fi Alliance. Wi-Fi Certification provides assurance that the device has passed the interoperability test conducted by the Wi-Fi Alliance, a group that certifies interoperability among wireless LAN devices.
• The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI trade dress and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
• App Store® is registered in the U.S. and other countries.
• Google Play and the Google Play logo are trademarks of Google LLC.

www.denon.com
Printed in Japan 5411 12122 00AS © 2024 Masimo. All Rights Reserved.

References

• Web under construction
• support.denon.com/
• Denon™ Home Theater | Enhance the Entertainment Experience

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>