dji MATRICE 3D Series Drone Camera User Guide
- August 11, 2024
- DJi
Table of Contents
dji MATRICE 3D Series Drone Camera
Specifications
- Model: ABC123
- Dimensions: 10in x 5in x 3in
- Weight: 2lbs
- Power Source: Battery-operated
Product Usage Instructions
Step 1: Assembly
Follow the provided assembly instructions to put together the product
components.
Step 2: Power On
Ensure the product is powered off before inserting the batteries. Turn on
the product using the power button.
Step 3: Setting Adjustments
Use the control buttons to adjust settings such as speed, intensity, or
mode according to your preference.
Step 4: Operation
Once the settings are adjusted, use the product as intended. Follow safety
guidelines during operation.
In the Box
- Aircraft (1)
- with microSD card insertedi
- CW Propellers (Pair)
- CCW Propellers (Pair)
- Screws and Washers
DJI Matrice 3D and DJI Matrice 3TD are equipped with different cameras. Refer
to the actual product purchased.
This guide uses the Matrice 3TD aircraft as an example. When the aircraft and
the dock are purchased together, the aircraft and the battery are packaged and
delivered separately. When purchasing the aircraft separately, it does not
come with an Intelligent Flight Battery.
Disclaimer and Warning
By using this product, you signify that you have read, understand, and accept
the terms and conditions of the guidelines and all instructions at
https://enterprise.dji.com/dock-2.
EXCEPT AS EXPRESSLY PROVIDED IN AFTER-SALES SERVICE POLICIES AVAILABLE AT
https://www.dji.com/service/pollicy, THE PRODUCT AND ALL MATERIALS AND
CONTENT
AVAILABLE THROUGH THE PRODUCT ARE PROVIDED “AS IS” AND ON “AS AVAILABLE BASIS”
WITHOUT WARRANTY OR CONDITION OF ANY KIND. This product is not intended for
children.
Introduction
DJI Matrice 3D Series features both an infrared sensing system and a six-
directional vision system and comes with a high-performance multi-camera
payload. The RTK module facilitates centimeter-level positioning, meeting the
needs of high-precision operations and improving flight safety. The aircraft
has a protection rating of IP54 (IEC 60529).
The aircraft can be used with DJI Dock 2. Together with DJI FLIGHTHUB™ 2,
automated operations can be achieved and real-time camera views can be
obtained, meeting the needs for different scenes such as security, patrol
inspection, and mapping.
Overview
- Gimbal and Camera
- Vision System
- Auxiliary Light
- Infrared Sensing System
- Internal Charging Module
- Front LEDs
- Aircraft Status Indicators
- Motors
- Propellers
- Frame Arms (incl. Internal Antennas)
- USB-C Assistant Port (E-Port Lite)
- Intelligent Flight Battery
- Power Button
- Battery Level LEDs
- Battery Buckle
- Battery Locking Arm
- microSD Card Slot
- Beacon
- GNSS/RTK Antenna
- E-Port
- Dongle Compartment
Preparing the Aircraft
- Make sure the propellers are securely mounted and not damaged or deformed and that there are no foreign matter in or on the motors or propellers.
- Make sure the lenses of the vision system, gimbal cameras, the glass of the infrared sensors, and the auxiliary lights are clean and not blocked in any way.
- Make sure the covers of the microSD card slot, the USB-C assistant port (E-Port Lite), and the E-Port are firmly closed.
Inserting the Battery: Open the battery locking arm and insert the Intelligent Flight Battery into the battery compartment of the aircraft until a click is heard. Close the battery locking arm until the orange mark completely disappears, which indicates the battery locking arm is in the lock position.
-
Powering On/Off: Press, then press and hold.
-
Checking the Battery Level: Press once.
-
To remove the battery, open the battery locking arms, then press the battery buckles and remove the battery.
-
When transporting an unpacked dock, make sure to remove the aircraft from the dock for separate transportation.
-
If the battery level is too low, charge the aircraft battery by placing the aircraft on the dock or using a charging kit (sold separately).
Linking and Activation
DJI Matrice 3D Series aircraft should be linked with DjI Dock 2 for automated flight operations. Power on DJI RC Pro Enterprise, run DJI PILOT™ 2, and follow the instructions to complete linking, activation, and dock configuration.
The DJI RC Pro Enterprise remote controller can also be linked to the aircraft
and used as controller B for manual control. During on-site flight tests,
controller B can take control and manually control the flight. Refer to the
DjI Dock 2 Quick Installation Guide for the linking process.
The aircraft requires activation before first use. An internet connection is
required for the remote controller during activation.
Usage
- Scan the QR code or go to the address to watch the tutorial videos and read the related manuals such as the Safety Guidelines, User Manual, and Installation and Setup Manual.
- Make sure to understand the safety precautions and learn more about aircraft information.
Specifications
In some countries and regions, the 5.1GHz and 5.8GHz frequency bands are prohibited, or the 5.1 GHz frequency band is only allowed for indoor use. Please refer to local laws and regulations for more information.
Frequently Asked Questions
- Q: How do I clean the product?
- A: To clean the product, use a damp cloth with mild detergent. Avoid using harsh chemicals or abrasive materials.
- Q: What should I do if the product malfunctions?
- A: If the product malfunctions, refer to the troubleshooting section in the user manual or contact customer support for assistance.
- Q: Can I use the product outdoors?
- A: This product is designed for indoor use only. Avoid exposing it to moisture or extreme temperatures.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>