FORTINET FortiWiFi 50G BIOS-Level Security LED and Physical Switch User Guide
- August 11, 2024
- FORTINET
Table of Contents
FORTINET FortiWiFi 50G BIOS-Level Security LED and Physical Switch
Specifications
- Model : FortiWiFi 50G
- Models : FWF-50G, FWF-51G
- Power Input : 12V DC, 100-240V AC, 50/60Hz adapter
- Wireless Standard : WiFi
- Ethernet Ports : 4x 1 Gbps
Product Usage Instructions
WiFi Setup
- Connect to the default Fortinet wireless network.
- Open a browser and go to https://192.168.1.99.
LAN Setup
- Connect Port 1 to an Ethernet port or USB-RJ45 adapter on your computer using the provided Ethernet cable.
- Open a browser and go to https://192.168.1.99.
CLI Setup
- Connect a console cable (not included) to the Console Port.
- Open a Terminal app using settings: 9600-8-N-1.
Default Logins
For accessing the device settings:
- URL : https://192.168.1.99
- Username: admin
- Password : leave blank
The Essentials
-
FortiCare
Register your device to activate FortiCare Support at https://support.fortinet.com -
WiFi
1. Connect to the default fortinet wireless network
2. Open a browser to https://192.168.1.99- LAN
1. Connect Port 1 to an Ethernet port or USB-RJ45 adapter on your computer using the provided Ethernet cable
2. Open a browser to https://192.168.1.99- CLI
1. Connect a console cable (not included) to the Console Port
2. Open a Terminal app using 9600-8-N-1 Default Logins- Default Logins
- https://192.168.1.99
- Username : admin
- Password : leave blank
- SSID : fortinet
- Password : fortinet
Fortinet Documents Library
For getting started documentation, admin guides, up-to-date hardware
manuals and reference resources, visit https://docs.fortinet.com/
FortiGate Cloud
Experience simplified cloud provisioning, security analytics, remote access,
hosted log retention and reporting at https://fortigate.forticloud.com
FortiExplorer Go
Rapidly provision, deploy and manage your Fortinet Security Fabric
Platform, free on iOS and Android: https://docs.fortinet.com/product
/fortiexplorer-go/
Package Contents
FortiWiFi 50G Series
FWF-50G, FWF-51G
Setup
FortiGate Cloud
Login to https://fortigate.forticloud.com using your Fortinet Credentials,
then click Add FortiGate and enter the Cloudkey
Front FWF-50G
Rear FWF-50G
- Power Input 12V DC, 100-240V AC, 50/60Hz adapter
- USB 3.0 Port (USB-A)
- CONSOLE Port (RJ-45) CLI management
- Signed Firmware Switch
- Ports (5x RJ-45) WAN, A – FortiLink, 3, 2, 1
- Antenna Connector (3x SMA)
Cautions and Warnings
Environmental specifications
Ambient operating temperature : 0°C to 40°C
Refer to specific Product Model Data Sheet for Environmental Specifications (Operating Temperature, Storage Temperature, Humidity, and Altitude)
Safety
-
Battery – Risk of explosion if the battery is replaced by an incorrect type. Do not dispose of batteries in a fire. They may explode. Dispose of used batteries according to your local regulations. IMPORTANT: Switzerland: Annex 4.10 of SR814.013 applies to batteries.
This product is intended to be supplied by a Listed pluggable A via Class I external power supply adapter by means of a power cord connected to a socket- outlet with earthing connection. -
Grounding — To prevent damage to your equipment, connections that enter from outside the building should pass through a lightning / surge protector, and be properly grounded. Use an electrostatic discharge workstation (ESD) and/or wear an anti-static wrist strap while you work. In addition to the grounding terminal of the plug, on the back panel, there is another, separate terminal for earthing.
-
This product has a separate protective earthing terminal provided on the back of the product in addition to the grounding terminal of the attachment plug. This separate protective earthing terminal must be permanently connected to earth with a green with yellow stripe conductor minimum size # 22AWG and the connection is to be installed by a qualified service personnel.
Regulatory Notices
Federal Communication Commission (FCC) – USA
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received; including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if it is not installed and used in accordance with the instruction manual, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
WARNING : Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This device meets all the other requirements specified in Part 15E, Section 15.407 of the FCC Rules.
Innovation, Science and Economic Development (ISED) – Canada
This Class B digital apparatus complies with Canadian ICES-003.
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
For product available in the USA/Canada market, only channels 1~11 can be operated. Selection of other channels is not possible. This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. The maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be such that the equipment still complies with the e.i.r.p. limits specified for point-to-point and non-point-to-point operation as appropriate. The maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-5725 MHz shall comply with the e.i.r.p. limit; and The worst-case tilt angle(s) necessary to remain compliant with the e.i.r.p. elevation mask requirement set forth in Section 6.2.2(3) shall be clearly indicated.
Caution : The device for the band 5150-5250 MHz is only for indoor usage to reduce potential for harmful interference to co-channel mobile satellite systems.
Caution : The maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-5725 MHz shall comply with the e.i.r.p. limit; and the maximum antenna gain permitted for devices in the band 5725-5825 MHz shall comply with the e.i.r.p. limits specified for point-to-point and non-point-to- point operation as appropriate.
his radio transmitter (IC: 7280B-3901M12) has been approved by ISED to operate with the antenna types listed below with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device.
This device and it’s antennas(s) must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with IC multi-transmitter product procedures.
IMPORTANT : The device must be professionally installed and must use the supplied antenna.
Professional Installation Instruction
-
Installation personnel
This product is designed for specific application and needs to be installed by qualified personnel who has RF and related rule knowledge. The general user shall not attempt to install or change the settings. -
Installation location
The product shall be installed at a location where the radiating antenna can be kept 20cm from nearby person in normal operation condition to meet Regulatory RF exposure requirement. The installation applies to indoor location. -
External antenna(s)
Use only the antenna(s) that have been approved by the manufacturer. The non- approved antenna(s) may produce unwanted spurious or exces-sive RF transmitting power that may lead to the violation of FCC/ISED limit and is prohibited. -
Warning
Please carefully select the installation position and ensure that the final output power does not exceed the limit set forth in relevant rules. The violation of the rule could lead to serious federal penalty.
European Conformity (CE) – EU
This is a Class B product. In a domestic environment, this product may cause
radio interference, in which case the user may be required to take adequate
measures.
This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.
Simplified EU Declaration of Conformity
This declaration is only valid for Fortinet products (including combinations
of software, firmware and hardware) provided by Fortinet or Fortinet’s
authorized partners to the end-customer directly for use within the EU or
countries that have implemented the EU Directives and/or spectrum regulation.
Any Fortinet products not obtained directly from Fortinet or Fortinet’s
authorized partners may not comply with EU Directives and Fortinet makes no
assurances for such products.
This product is in compliance with Directive 2014/53/EU.
Note : The full Declaration of Conformity for this product is available in the link below: https://site.fortinet.com/ProductRegulatory/EU
The device is restricted to indoor use only when operating in the 5150 to 5350 MHz frequency range in the following countries:
Compliance with 2014/53/EU Radio Equipment Directive (RED)
By Article 10.8(a) and 10.8(b) of the RED, the following table provides
information on the frequency bands used and the maximum RF transmit power of
the product for sale in the EU:
Note : * Only with DFS bands certification
UK Conformity Assessed (UKCA) – United Kingdom
The product transmits within the frequency ranges and less than or equal to
the power listed below:
Note : * Only with DFS bands certification
This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This product is in compliance with Statutory Instrument 1206 Radio Equipment Regulations 2017
The full Declaration of Conformity for this product is available in the link below:https://site.fortinet.com/ProductRegulatory/UK
The device is restricted to indoor use only when operating in the 5150 to 5350 MHz frequency range in the following countries: UK
April 29, 2024
Copyright © 2024 Fortinet, Inc. All rights reserved. Fortinet®, FortiGate®, FortiCare® and FortiGuard®, and certain other marks are registered trademarks of Fortinet, Inc., and other Fortinet names herein may also be registered and/or common law trademarks of Fortinet. All other product or company names may be trademarks of their respective owners. Performance and other metrics contained herein were attained in internal lab tests under ideal conditions, and actual performance and other results may vary. Network variables, different network environments and other conditions may affect performance results. Nothing herein represents any binding commitment by Fortinet, and Fortinet disclaims all warranties, whether express or implied, except to the extent Fortinet enters a binding written contract, signed by Fortinet’s Chief Legal Officer, with a purchaser that expressly warrants that the identified product will perform according to certain expressly-identified performance metrics and, in such event, only the specific performance metrics expressly identified in such binding written contract shall be binding on Fortinet. For absolute clarity, any such warranty will be limited to performance in the same ideal conditions as in Fortinet’s internal lab tests. Fortinet disclaims in full any covenants, representations, and guarantees pursuant hereto, whether express or implied. Fortinet reserves the right to change, modify, transfer, or otherwise revise this publication without notice, and the most current version of the publication shall be applicable.
For Product License Agreement / EULA and Warranty Terms, visit https://www.fortinet.com/content/dam/fortinet/assets/legal/EULA.pdf
FWF-50G-51G-QSG-20240429
FAQ
How do I reset the device?
To reset the device, press and hold the BLE/RESET button for a few seconds
until the system restarts.
How can I access the FortiGate Cloud service?
To access FortiGate Cloud, log in to https://fortigate.forticloud.com with
your Fortinet Credentials. Click on Add FortiGate and enter the Cloudkey when
prompted.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>