THERMORY BARRELS Sauna Installation Guide

: August 11, 2024
: THERMORY

Table of Contents

THERMORY BARRELS Sauna
Product Information
Product Usage Instructions
PARTS 1
SEE HOW ASSEMBLY WILL LOOK HERE
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

THERMORY BARRELS Sauna

Product Information

The Thermory Barrel Sauna is a premium sauna kit that allows you to build your very own sauna experience. The kit includes all the necessary parts and hardware for assembly, providing a luxurious and relaxing sauna experience.

Specifications:

Dimensions: 8′ x 8′ x 8′
Recommended for 3 people
Materials: Wood, Stainless Steel

Product Usage Instructions

Step Zero: Pre-Installation Checks
Before starting the installation process, ensure that the sauna will fit in your chosen location. Make sure the site is level, free of standing water, and suitable for installation.

Step One: Installing Support Cradles
Measure and place the support cradles (A) on a level site.
Ensure they are square by checking equal diagonal measurements. Fix the center stave (B) with screws on the support cradles.

Step Two: Attaching Body Staves
Attach sauna body staves (C, C1) to each side of the center stave (B) using screws. Align the panel groove on each body stave for proper assembly.

Step Three: Installing Panels
Place the front panel (D) and rear panel (D1) into the grooves and secure them with body staves. Attach front and back side panels (E, F, E1, F1) using screws, ensuring proper alignment.

Frequently Asked Questions (FAQ)

Q: How many people can the sauna accommodate?
A: The sauna is recommended for 3 people.
Q: What tools are required for assembly?
A: You will need a rubber mallet, screwdrivers, and a level for assembly.

Everything you need to build your very own Thermory Barrel Sauna is right there in front of you. If it looks like a lot, it is. If it seems too complicated to assemble, it isn’t.
These instructions are specifically written to guide you through each step with ease. And if you need additional encouragement, you can scan the code on the back of this guide to see how it’s done.
The Thermory Barrel Sauna N 61 is designed for up to six people and is outfi°ed with a porch. That’s plenty of room for you and the friends helping you put this together. But if you want to enjoy the first steam all by yourself, we understand.

The Wait Is Over.
We truly appreciate the opportunity to share our love of sauna culture with you. And if there’s anything we can do to make your sauna experience better, please don’t hesitate to let us know. If not, just relax and enjoy.

PARTS 1

PARTS 2

Before you begin, be sure the sauna will fit in your chosen location.
Approximately L x W x H of 8’ x 8’ x 8’ is ideal. Overall dimensions are shown here.
Be sure the site is level and free of standing water after rainfall.
Concrete, pavers or crushed stone is preferred.

STEP ONE
Measure support cradles (A) diagonally from corner to corner.
Measurements “a” and “b” should be equal to ensure the cradles are square.
Be sure cradles remain level.

STEP TWO
Place the support cradles (A) on level site. The middle support cradle will have no dowel. Carefully level for better stability.
Place the center stave (B) on wooden dowels embedded in outer support cradles (A).
Fix the center stave (B) with screw 4.2 x 70 (N).

STEP THREE
Place 6 sauna body staves (C, C1) to each side of the center stave (B) and fix with screws 4.2 x 70 (N).
Body staves (C) are le˛ and right sided.
Be sure to align the panel groove on every next body stave.

STEP FOUR
Place front panel with sauna doors (D) and rear panel (D1) into the trimmed grooves. Be sure each panel is centered, leveled, and completely seated into the floor panel.
Bind these panels together by temporarily placing one or two body stave (C; C1) on top of them.

STEP FIVE
Two front side panels (E, F) attach to the front panel (D) and two back side panels (E1, F1)
attach to the rear panel (D1) by 4 screws 5.0 x 120 (M) and 4 stainless steel screws 4.20 x 70 (N1). Be sure the bench supports face the interior of the sauna.
Confirm that the combined width of the rear wall (E1, D1, F1) matches the combined width of the front wall (E, D, F).

STEP SIX
Continue placing left ˛ and right body staves (C, C1) tightly on both sides of the sauna using rubber mallet, while fixing body staves with 4.2 x 70 screws. To finish the roof top joint, use top stave (H). Different thickness options are provided to completely fill the gap.

STEP SEVEN
Measure steel bands (I) to ensure correct length of 276,” +/- 1/2” is acceptable.
Install steel bands (I) by wrapping bands around barrel prior to connecting with bolts and nuts (U).
Place steel bands evenly around barrel, covering screw heads.
Measure from steel band to barrel edge to ensure the steel band is even.
Cover roof with roof tape.
Rub and smooth with pressure to ensure adhesion.
Install interior aspen roof trim (O) with 4.0 x 50 (P1) stainless steel screws.

STEP EIGHT
Attach interior supporting leg (J1) to the bench (J), install two sauna benches on wall mounts using stainless steel screws 4.2 x 70 (N1).
Hold the seat and leg assembly tight to the sauna wall. Using a level, make sure the bench seat is level from front to back. This will ensure proper placement.
Install backrests (J2) at your chosen height using stainless steel screw 4.0 x 50 (P1).

STEP NINE
Install porch benches (K), using screws 4.2 x 70 (N) and 5.0 x 100 (X).
Hold the seat and leg assembly tight to the sauna wall. Using a level, make sure the bench seat is level from front to back. This will ensure proper placement.

STEP TEN
Wire raceways (V) and flooring duckboards (L) can be used for wiring runs, confirm specific wiring runs needed for chosen stove

STEP ELEVEN
Place waterproof roof cover (Z) and fix it with wooden slat (Z1) and screws 4.0 x 50 (P).
Install front and rear decorative roof finishing boards (W), fixing by screws 4.0 x 50 (P).

WATCH THE VIDEO