Foxwell HD500 Automotive Diagnostic System User Guide

Foxwell HD500 Automotive Diagnostic System

Vehicle Connection

To connect to vehicle:

1. Locate the data link connector (DLC). The DLC is generally located under the dash on the driver side of the vehicle.
2. Attached the diagnostic cable to the scanner and tighten the captive screws to ensure good connection.
3. Connect a correct adapter to the data cable according to the vehicle being serviced and plug it into the vehicle DLC.
4. Switch the ignition key to the ON position.

Connection Of Non OBD-II:

Vehicles with non-standard OBD-II interface need to connect the main test line to the corresponding dedicated connector

Registration

NOTE
Please make sure your network works correctly and the tablet is fully charged or connect to external power supply.

1. Press Update from home screen of Q diagnostic APP, and then press Free Registration to start.

2. Enter one of your emails and tap Send Code to get a 4-digit security code. Input the code, create a password and click Free Registration to complete.

3. The serial number will be recognized automatically and click Submit to activate the scanner.

Update

1. Press Update from home screen of Q diagnostic APP or press update shortcut at the tool bar.
2. The available updates display. Click the check box(s) in front of the software you wish to update and then click the Update button to download.

Diagnostic Operation

• Before start diagnosis, please make sure:
  1. The ignition switch is turned to ON position.
  2. The engine is off.
  3. The vehicle battery voltage is between
  4. The scanner is correctly connected to 10- volts. the vehicle.
• Don’t connect or disconnect the equipments while the ignition is on or the engine is running.

1. Establish communication with the vehicle either via Bluetooth/USB or cable connection.
2. Identity the vehicle either by VIN reading or manually entry.
3. Find the control modules installed in the vehicle either by Quick Scan or manual selection
4. Start the tests and make records of test data when necessary.

Remote Control

Whenever you need to get remote support from Foxwell,

1. Click the Remote Control icon at the home screen to start TeamViewer.

2. Press Quick Support icon and the TeamViewer ID will show.

3. Send your ID to us to let our team to take control your tablet.

Power Up the Scanner

Before using the diagnostic APP of the scanner (including updating the scanner), please make sure to provide power to the scanner. In case of low battery volume, please charge it with the power cable.

The unit operates on any of the following sources:

• Internal Battery Pack

• Vehicle Power

• External Power Supply

Data Logging

Data Logging collects the communication data between the scanner and the vehicle under test to help with troubleshooting of diagnostic failures.

1. When connected to a car, click the Data Logging icon to start to create a debug data log.

2. Fill in the corresponding content and click the Save or Upload button.

3. Go to Data Manager — Data Record to view the stored debug logs.

Customer Support

For service and support, please contact us.

REGISTER YOUR PRODUCT AT
http://www.foxwelltech.us/register.html
WebSite: www.foxwelltech.us
E-mail: support@foxwelltech.com
Service Number : + 86 – 755 – 26697229
Fax: + 86 – 755 – 26897226

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>