MONSTER XKT19 Airmars Earbuds User Manual

MONSTER XKT19 Airmars Earbuds

Product Schematic Description

Charge the charging case

• Connect the charging case to the 5V power adapter with a Type-C charging cable.
  • Rated input: 5V 30mA(Headphone)
  • Rated input: 5V 300mA(Charging case)
• TIPS: When the charging case is closed and the LED flashes red 5 times, pls charge the charging case.

INDICATOR GUIDE

Product operating instructions

1. Power on
   • Method 1: Open the charging case, and the headphones will turn on automatically.
   • Method 2: Long touch the MF button of the headphones for 3s to turn on the headphones.
2. Power off
   • Method 1: Put the headphones into the charging case and close the cover.
   • Method 2: After disconnecting from the Bluetooth device for 3 minutes.
3. Pairing
   • Step one: Open the charging case, and the headphones will start pairing automatically.
   • Step two: Open the Bluetooth list of smart devices, search for “Monster Airmars XKT19” to pair, and the connection is successful
   • After that, you will hear the “Connected” tone
   • Headphones will try reconnecting to the device within 3 minutes when connection is lost
   • NOTE:
   • Fully charge the headphones and power off before an intended not-in-use period.
   • Unplug the charging cable after charging

Operation NORMAL

Music playback

Phone

Game/Music/ANC switching : Device connected

Restore factory settings

• Method 1:
  • Power-on disconnected state: Click the left/right headset 5 times and turn off the left/right ear (clear all pairing and connection information).
• Method 2:
  • Power-on connection status: Tap the left and right headset five times, and hold down 10S within 3S to clear the pairing between the headset and Bluetooth devicePower off after the message.

Precautions

1. Headphones will turn on automatically(needless to press any button) pair and connect the device when the charging case is opened. After placing the headphones in the charging case, they will turn off and automatic charging will start when the cover is closed.
2. Charging every 15 days will extend battery life when not in use often. Cleaning off dirt on the charging contacts with cotton swabs with alcohol will maintain good contact for charging.
3. Keep the battery(battery pack) away from inflammable or excessive heat such as direct sunlight. Do not disassemble, hit, squeeze, or fireMedium. If severe swelling occurs, do not continue using. Do not place it in a high-temperature environment. Do not use after soaking water.
4. Intermittent is normal during playback for wireless products due to environmental factors, device brand, users’ behavior, etc.

Warnings

1. Do not use headphones at high volume for an extended period.
2. Keep the headphones away from dust and water.
3. Do not disassemble the headphones and accessories, otherwise warranty will be voided.
4. Keep headphones away from any impact or vibration.
5. Do not use any chemical solvents or cleaning agents on the headphones.

This table is compiled according to SJ/T 11364

• O: Indicates that this hazardous substance contained in all of the homogeneous materials for this part is below the limit requirement in GB/T 26572.
• X: Indicates that this hazardous substance contained in at least one of the homogeneous materials used for this part is above the limit requirement in GB/T 26572.

FCC

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning  the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction

FCC ID: 2A8PV-QSMXKT19

Warranty Service

Dear user, this warranty card is the proof of your future warranty application, please cooperate with the seller to fill it out and keep it for future use!

True wireless Bluetooth headphone instruction manual.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>