FOREVER iGO PRO JW-150 Smartwatch User Manual
- June 4, 2024
- FOREVER
Table of Contents
iGO PRO JW-150 Smartwatch
User Manual
Thank you for buying the Forever brand product. Before use, read this instruction manual and keep it for future reference. Do not open the device on your own — any repairs should be carried out by a serviceman. Only use original parts and accessories supplied by the manufacturer. We hope that Forever will meet your expectations.
Description
- Touch interface
- Function button
- Temperature sensor
- Heart rate sensor
Basic specification
Waterproofness: I P68
Battery capacity: Li-po 3,7 RR: 180 mAh, 0,666 Wh
Bluetooth: 5.0
Charging time: 2 hours
Standby time: up to 10 days
Display Type: TFT
Display size: 1.4″ 240 x 240 pixel
Weight: 32 g
Application: Forever GoFit
SAFETY NOTES:
- Avoid impacts between the device and hard objects since this may damage the device
- Avoid contact of the device with solvents or other chemicals
- Keep away from strong magnetic fields
- Avoid contact of the smartwatch with water if the water temperature exceeds 35t
- Do not repair the device on your own
- Do not throw it into the fire, there is a risk of an explosion
First launching
When using the device for the first time, take it out of the package and
charge it using the supplied charging cable. The device will turn on
automatically after charging is completed. The date and time of the device
will be automatically synchronized and set after establishing a connection
with a dedicated application via Bluetooth. The language of the device will be
automatically adapted to the one set in the phone.
To activate the smartwatch without connecting it to the charger, press and
hold the touch button located below the display for 3 seconds.
Charging
Connect the device with the charging cable included in the kit. Make sure that
the device and cable connectors are connected to each other, and then connect
the USB cable to a power source.
After the charging process is complete, disconnect the smartwatch from the
charging cable and disconnect the cable from the power source.
Turning the smartwatch on/off
Turning on: Press and hold the function button until the smartwatch turns on.
Turning off: Press and hold the function button until the device turns off.
You can also go to the settings tab in the smartwatch menu and select the.
Disables the option marked with the following symbol , and then confirm your
choice.
„Forever GoFit” application installation
Find the application called ‘Forever GoFit” in Google Play or App Store and
install it.
NOTE: The operating system of the phone must have the following minimum
specifications to run the application and support the smartwatch: Android 5.1
or higher/IOS 10.0 or higher
Connect the smartwatch with the phone
- Activate Bluetooth on your phone. NOTE: To be able to use all functions of the application and the smartwatch, during the first launching, allow the application to access all required functions, and then also activate access to notifications.
- Activate ‘Forever GoFit” on the phone. Start using the application as a ‘Guest” by clicking the upper right part of the screen or selecting “Register’ and follow the steps below:
– enter the email address you want to use to create an account
– Press the button (obtain verification)
– a verification code, which must be entered in the indicated field, will be sent to your email
– enter and remember your user password
The smartwatch interface description
-
How to use
• To turn the watch power on or off, press and hold the function button.
• You can raise your hand or press the function button to turn on the screen.
• Go to menu: Slide from right to left in the watch face inter-face.
• Select a function: Slide right and left in the menu and then tap the icon.
• Quick menu: move down
• Notifications: swipe up
• Confirm: Tap the icon.
• Select game: Swipe the watch face interface from left to the right on my screen.
• Undo: Swipe the watch interface from left to right.
• Return to the watch face: Briefly press the function button in any interface. -
Watch face interface
If you want to change the watch face of your smart watch, press and hold the current watch face, then slide left or right to go through the different watch faces and choose the one you like.
Daily Activity
| The device automatically calculates your daily activity data. Tap the Daily
Activity icon to check the number of steps, distance traveled and calories
burned for the day.
---|---
Sport| Select the „Sports’ icon to enter a selection of sports. The smartwatch
offers 5 sports modes: walking, running, cycling, and basketball. Select the
sport you want and then start exercising. The smartwatch will record training
data.
Games| Select the “Games” icon to access the list of available games.
Alarm| Set alarm/alarm clock in App
Activity history| Select the Activity History icon to track your activities 0
Sleep
| The smartwatch automatically monitors sleep from 21:30 to 12:00. After
waking up the next day, the smartwatch will display the total number of hours
slept. If the smartwatch is connected to the Forever GoFit” app via Bluetooth,
you can check the more detailed sleep report in the app.
Date and time| Select the Date and Time icon to enter the time settings, time
format, and date.
Heart rate
| Select the Heart rate icon to start heart rate measurement. Once the
interface is entered. the measurement will start. During the measurement, the
interface value will be zero. After the measurement is completed, the value
will be displayed.
After the data is synchronized, you can check the measurement history in the
app.
Message| If the device is connected to a smartphone, after selecting the
Messages” icon, the smartwatch will display the latest incoming messages and
notifications.
Timer| Tap the Timer” icon to start the stopwatch or timer function.
Setting| Language: Select the language for the device interface.
Screen: Set the watch face, brightness, screen timeout, and smart wake-up
feature.
Do not disturb mode: enable/disable the mode.
Vibration intensity: Select a vibration intensity level.
System: Display device information, shut down, and device reset function.
The maximum radiated radio frequency power in the frequency range
Frequency range| Bluetooth 2402-2480 MHz
Maximum emitted power| 3,52 dBm (ERP)
Rules for safe use
SECURITY
Please read these tips carefully. Failure to follow these instructions may
be dangerous or illegal.
DO NOT RISK
Do not switch the device on in places where the use of electronic devices is
forbidden, or when it may cause interference or other hazards. Comply with all
kinds of prohibitions, regulations, and warnings provided by the personnel of
the place where you want to use the device.
PROFESSIONAL SERVICE
Only qualified service of the manufacturer or an authorized service center may
repair this product. Repairing the device by an unqualified service center or
by an unauthorized service point may damage the device and void the warranty.
MODIFICATIONS
The manufacturer is not responsible for damage caused by unauthorized
modifications.
MOBILE AND MENTAL DISABILITIES AND CHILDREN
The device should not be operated by people (including children) with limited
mobility or mental, as well as by people who have no experience in the use of
electronic equipment. They may use it only under the supervision of persons
responsible for their safety after reading and understanding the instructions
on how to use the device safely. Keep the device and its packaging out of the
reach of children. Cables and plastic bags can become wrapped around a child’s
neck and cause suffocation. The device is not a toy.
BLUETOOTH
The wireless Device complies with safety and radio frequency standards. All
wireless devices may cause interference that may affect the operation of other
devices.
SURROUNDINGS
The device should not work in dusty conditions. Connect the device in such a
way that it cannot be damaged and does not pose a threat to people and
animals. Do not expose the device to sunlight and do not use it, or leave it
in the immediate vicinity of devices that emit a lot of heat (heaters,
radiators, etc.). Plastic elements may deform, which may affect the operation
of the device or lead to its complete damage.
WATER AND OTHER LIQUIDS
Do not expose the device to water or other liquids. Avoid working in an
environment with high humidity – steamy kitchens, bathrooms, etc. Water
particles can cause moisture to appear in the device, which adversely affects
the electronics and can damage the equipment.
BATTERIES
Avoid exposing the battery to very cold or very hot temperatures. Extreme
temperatures can affect the capacity and lifetime of the battery. Avoid
exposing the battery to liquids or metal objects, as this may lead to total or
partial damage to the battery. Use the battery only for its intended purpose.
Do not destroy, damage, or throw the battery into the fire – it can be
dangerous and cause a fire. Used or damaged batteries should be placed in a
special container. Overcharging the battery may damage it. Therefore, do not
charge the battery longer than necessary to fully charge it.
Proper disposal of used equipment
This device is marked with a crossed-out garbage container symbol, in
accordance with the European Directive 2012/19/EU on Waste Electrical and
Electronic Equipment (WEEE). Products marked with this symbol should not be
disposed of or discarded with other household waste at the end of their
service life. The user is obliged to dispose of waste electrical and
electronic equipment by delivering it to a designated point, where such
hazardous waste is recycled. The collection of this type of waste in separate
locations and the proper recovery process contribute to the conservation of
natural resources. Proper recycling of waste electrical and electronic
equipment is beneficial to human health and the environment. For information
on where and how to dispose of used electronic equipment in an environmentally
safe manner, the user should contact the relevant local authority, the
collection point, or the point of sale where the equipment was purchased.
Proper disposal of used batteries
In accordance with EU Directive 2006/66/EC, as amended by Directive 2013/56/EU
on the disposal of batteries, this product is marked with a crossed-out
garbage container symbol. This symbol means that the batteries used in this
product should not be disposed of with ordinary household waste, but handled
in accordance with the directive and local regulations. Do not dispose of
batteries with unsorted municipal waste. Battery users must use the available
collection networks for these items, that allow for their return, recycling,
and disposal. Within the EU, the collection and recycling of batteries are
governed by separate procedures. To learn more about existing battery
recycling procedures in your area, contact your city hall, waste management
agency, or landfill.
Declaration of conformity with the directives of the European Union
Tel ForceOne Sp. z o.o. hereby declares that the JW-150 IGO 2 is in compliance
with Directive 2014/53/EU. The full text of the EU declaration of conformity
is available at the following internet address:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>