Xhorse 2AI4T-XDKML0 Key Tool Lite User Manual
- August 10, 2024
- Xhorse
Table of Contents
FCC ID2AI4T-XDKML0
Key Tool Lite
USER MANUAL
Scan QR Code to download Xhorse APP
Overview
A:
1. Remote frequency detection
2. Chip clone collection
3. Chip and remote reading coil
125KHz 134KHz
B: IC card identification
C: Working status indicator light (Flashing: upgrade mode Always on:
working mode)
D: Connect to phone TYPE-C interface
E: Remote programming cable port
F: Remote programming cable
Phone connection method
Power on: Insert the TYPE-C cable, and allow the app to access the USB
port of the phone, and connect the device.
Power off : unplug the TYPE-C cable.
Note: If there is a prompt on the right side of the interface, open the
phone settings and turn on the OTG connection switch.
Main function 1: Vehicle Remote, Generate Transponder, Frequency
Detection
-
Vehicle Remote
Support Xhorse XK-wire remote, XN-wireless remote, XEwireless remote and Xhorse Smart remote generation. -
Generate Transponder:
Suport VVDI XT27 super remote generation. -
Frequency Detection:
Support common car key frequency detection.
Main function 2: Transponder Clone
As shown in the figure, move the KEY TOOL LITE close to the ignition switch, and turn the ignition key on and off repeatedly. (For push start system, use the KEY TOOL LITE close to the emergency switch area, then press the start button repeatedly.)
Main function 3: Transponder Clone (Clone interface process)
Main function 4: IC/ID Clone
Warranty And After-Sale Instructions
KEY TOOL LITE has one year warranty, and it is based on the date on the transaction voucher; If do not have transaction voucher or lost it, the factory date recorded by the manufacturer will prevail.
※ Situations on the below can not get free repairmen
- Damage caused by not following the use instructions.
- Damage caused by repairing or retrofiting in private.
- Damage caused by fall, crash or inapproprate voltage.
- Damage caused by inevitable force.
- Damage caused by using in harsh environment or on the vehicle and ship for a long time; Get main body dirty and worn due to use.
Please get in contact with dealer or scan the QR code behind the instruction, download Xhorse official APP to get after-sale and technical support.
The pictures are for reference only, the actual product shall prevail. Xhorse reserves all rights to this manual. Without permission, any individual or organization is prohibited from copying and disseminating any part of this manual in any form and product improvement. The content of this manual may be changed without prior notice.
Key Tool Lite
FCC statements:
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and (2) This device must
accept any interference received, including interference that may cause
undesired operation.
NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications or changes to this equipment. Such modifications or changes could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement, The device can be used in portable exposure condition without restriction. Federal Communication Commission (FCC) Radiation Exposure Statement Power is so low that no RF exposure calculation is needed.
CE & UKCA statements:
Declaration of Conformity Hereby, Shenzhen Xhorse Electronics Co., Ltd. declares that the radio equipment type XDKML0 is in compliance with directive 2014/53/EU and RER 2017 (SI 2017/1206).
RF exposure information: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. Radiation Exposure Statement Power is so low that no RF exposure calculation is needed.
Bands
| Operation Frequency| Max.Power
---|---|---
125 KHz| 125 KHz|
E-field(V/m): 37.14
H-field(A/m): 1.5827
134 KHz
| 134 KHz|
E-field(V/m): 27.16
H-field(A/m): 1.5991