PXN-V9 Gaming Racing Wheel User Manual

PXN-V9 Gaming Racing Wheel

Thank you for choosing and supporting PXN, please read this manual carefully before starting to enjoy your gaming experience.

System Requirements

Supported Platform: PC /PS3 /PS4 /XBOX ONE /XBOX SERIES X&S /SWITCH
PC System: Windows 7/ 8/ 10/ 11

 Product Appearance

Mounting Clamps Installation

The steering wheel comes with a pair of mounting clamps to fix the wheel on the table.

• Step 1 Place the suction cup into the base slot and rotate the suction cup to lock.
• Step 2 Rotate the knob of the mounting clamps and insert it into the base slot of the steering wheel.
• Step 3 Slide forward along the slot until it clicks into place.
• Step 4 Place the steering wheel on the table and rotate the mounting clamp to tighten it.

Use on PC

• Step 1 Please connect the pedals and the shifter according to your needs before use.
• Step 2 Plug the USB cable of the steering wheel into the PC.
• Step 3 After successfully connecting to the PC, the steering wheel will default to X-input mode, with the red indicator light staying on.
• Step 4 Press the MODE button to switch to the corresponding mode before entering the game.

Mode Smching Method:
Press and hold the MODE button for 3 seconds. Release the button when the red indicator light starts flashing. The mode switch is successful when the red indicator light remains on.

X-input Mode, Recommended games: Need for Speed 15, Dirt 2/ 3/ 4, Ridge Racer, etc.
D-input Mode, Recommended games: Farming Simulator 22, Euro Truck Simulator 2, etc.
Function testing of the steering wheel is available on a PC. The specific steps are as follows: Wndows 7 System:
Open Control Panel – Devices and Printers – Right-click on the Game controller icon – Game Controller Settings, and click Properties to perform a functionality test.

Wndows 10 System:
Settings – Devices – Devices and Printers – Right-click on the Game controller icon – Game Controller Settings – Click Properties to perform a functionality test.

Use on PS3

• Step 1 Please connect the pedal and gear shifter as required before use.
• Step 2 Plug the USB cable of the steering wheel into the PS3 console, then power on the PS3 console.
• Step 3 Upon successful connection, the red indicator on the steering wheel will remain on. Then power on the PS3 console to enter the game or set up the related functions.

Use on PS4

• Step 1 Please connect the pedals and the shifter according to your needs before use. Step 2 Power off the original PS4 controller, use a USB cable to connect the original PS4 controller to the USB port on the steering wheel.
• Step 3 Plug the USB cable of the steering wheel into the USB port on the PS4 console , then tum on the PS4 console.
• Step 4 Press the MODE button on the steering wheel. Upon successful connection, the red indicator on the steering wheel will remain on.

Use on XBOX ONE/XBOX SERIES X&S

Step 1 Please connect the pedals and the shifter according to your needs before use. Step 2 Power off the original XBOX ONE /XBOX SERIES X&S controller, use a USB cable to connect the original XBOX ONE /XBOX SERIES X&S controller to the USB port on the steering wheel.
Step 3 Plug the USB cable of the steering wheel into the USB port on the XBOX ONE / XBOX SERIES X&S console, then turn on the XBOX ONE /XBOX SERIES X&S console. Step 4 Press the MODE button on the steering wheel. Upon successful connection, the red indicator on the steering wheel will remain on.

Use on SWITCH

On the SW’ITCH homepage , select Settings –+ Controllers and Sensors –+ click on the Pro Controller Wired Connection option and ensure that it is turned on.

Connect with SWITCH Console

• Step 1 Please connect the pedals and the shifter according to your needs before use.
• Step 2 Plug the Type-C OTG adapter into the SWITCH console.
• Step 3 Connect the steering wheel USB cable to the Type-C OTG adapter. Step 4 Upon successful connection, the red indicator on the steering wheel will remain on. (” Note: Type-C OTG adapter needs to be purchased separately.)

Connect with SWITCH Dock

• Step 1 Please connect the pedals and the shifter according to your needs before use.
• Step 2 Place the SW’ITCH console on the dock, ensuring Ws successfully connected.
• Step 3 Plug the USB cable of the steering wheel into the SW’ITCH dock and power on the SWITCH console.
• Step 4 Upon successful connection, the red indicator on the steering wheel will remain on.

Gear Shifter Function

High/Low Gear Sv.itching:
In the game, this button can be set as the button for switching between high and low gears.
Handbrake Switch:
In the game, this button can be set as the handbrake sv.itch button. Low Gears: 1, 2, 3, 4, 5, 6, R1
High Gears: 7, 8, 9, 10, 11, 12, R2

Sensitivity Settings

High Sensttivity
Press and hold the “PROG” button until the red indicator flashes quickly, then press ” t” on the D-pad. The switching is successful v.Aien the red indicator remains on. (Suitable for PS3, PS4, XBOX ONE, XBOX SERIES X&S platforms)
Medium Sensitivtty
Press and hold the “PROG” button until the red indicator flashes quickly, then press “+-” on the D-pad. The switching is successful v.Aien the red indicator remains on. (Suitable for PS3, PS4, XBOX ONE, XBOX SERIES X&S platforms)
Low Sensitivity
Press and hold the “PROG” button until the red indicator flashes quickly, then press ” i ” on the D-pad to save. The swttching is successful when the red indicator remains on. (Suitable for PC platforms)

Custom Maximum Steering Effective Angle

What is the Maximum Steering Effective Angle?
For example, setting the maximum steering effective angle of the steering wheel to 180″ means that turning left or right by 90″ achieves the actual maximum steering; turning more than 90° is ineffective rotation.

Setting Method

1. Step 1 Switch the steering wheel angle switch to the “900° position”.
2. Step 2 Press and hold the “PROG” button until the red indicator flashes quickly.
3. Step 3 Turn the steering wheel to the desired angle (must be more than 60°), then press the “OPTIONS” button. The red indicator will remain on when the setting is successful.

Button Programming
Programmable Buttons: Left paddle, Right paddle, Left pedal, Middle pedal, Right pedal, L3, R3, Gear shifter- High/low gear switch, Gear shifter- Handbrake switch, Gear shifter- 1-6 gears, Gear shifter- Reverse gear. Mappable Buttons: A, B, X, Y, L 1, L2, R1, R2.

Button Programming Method

1. Step 1 Press and hold the “PROG” button for 3 seconds until the red indicator flashes quickly.
2. Step 2 Press the Programmable Button, the red indicator will flash slowiy.
3. Step 3 Press the Mappable Button, programming will be successful when the red indicator remains on.

Clear a Single Button Mapping

1. Step 1 Press and hold the “PROG” button for 3 seconds until the red indicator flashes quickly.
2. Step 2 Press the Programmable Button twice consecutively, It will be cleared successfully when the red indicator remains on.

Clear All Button Mappings

1. Step 1 Press and hold the “PROG” button for 3 seconds until the red indicator flashes quickly.
2. Step 2 Press and hold the “OPTIONS” button for 4 seconds, all mapped buttons will be reset when the red indicator remains on, and the steering wheel sensitivity will return to default high sensitivity.

Note
Press and hold the “PROG” button for 3 seconds until the red indicator flashes quickly, then press the ”PROG” bliton again to withdraw programming without changing the previous settings. Press and hold the “PROG” button for 3 seconds until the red indicator flashes quickly, if there is no action, it will automatically withdraw programming after 10 seconds.

Audio Communication Function
The steering wheel is equipped with headphone and microphone functions, allowing for voice interaction on PS4, XBOX ONE, and XBOX SERIES X&S consoles.
The audio communication function will be limited when the gear shifter is connected to the steering wheel.

Advanced Settings for Steering Wheel
Download for iOS: Search IPXN Wieel) in App Store. Download for Android: Search [PXN Wheel] in Google Play. Install the [PXN Wheel) app on your phone. then enable BT and grant the required location permissions.
You don’t need to pair the device with your phone; just open the app to explore its features.

[PXN Wheel) App Features

• Sensitivity Adjustment
• Button Mapping in Games
• Button Programming
• Effective Rotation Degree Setting
• Vibration Adjustment
• Button Function Testing

Product Specifications

warning

• Avoid strong vibrations, do not disassemble, modify, or repair the product yourself.
• Prevent water or other liquids from entering the product to avoid damage.
• Avoid storing in dlamp, high-temperature, or smoky environment.
• Apply appropriate force when connecting and removing the device.
• Children should use this product under adult supervision.

is a registered trademark of ShenZhen PXN Electronics Technology Co., Ltd PS4/PS3 is a registered trademark of Sony Computer Entertainment Inc.
Xbox is a registered trademark of Microsoft Corporation.
SWITCH is a registered trademark of Nintendo Co., Ltd.
All trademarks are the property of their respective owner. Technical specifications are subject to change. Information contained herein is subject to change without prior notice. ShenZhen PXN Electronics Technology Co., Ltd. shall not be made liable for any errors that may appear.Please keep this information for later reference.

Brand: PXN Model: PXN-V9
Product Name: Gaming Racing Vvlieel
Country of Origin: China
Manufacturer: Shenzhen PXN Electronics Technology Co., Ltd
Web: www.e-pxn.com Support email: support@e-pxn.com
Manufacturer address: 1701-1706(01), Building 8, Zhongxi Xiangbinshan Garden, Fenghuanggang Community, Xixiang Street, Baoan District, Shenzhen, China

EUREP GmbH Unterlettenweg 1a 85051 Ingolstadt Germany +49 841 8869 7744 eurep @eurep-gmbh.com
Prolinx Global LTD 27 Old Gloucester Street, London, WC 1N 3AX, UK +0044 20 39661193 eu@eulinx.eu

is a registered trademark of ShenZhen PXN Electronics Technology Co., Ltd

FCC Compliance Statement:

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>