GEBERIT 968.609 User Guide

August 10, 2024
GEBERIT

GEBERIT 968.609

GEBERIT 968.609

Getting to know your product

The product at a glance

  1. Indirect lighting
  2. Top light strip (direct lighting)
  3. Mirror heating
  4. Sensor switch (switch top light strip and mirror heating on or off)
  5. Sensor switch (dim the top light strip)
  6. Sensor switch (lighten top light strip brighter)
  7. Sensor switch (switch indirect lighting on or off)
    The product at a glance 
    Figure 1: Geberit Xeno² illuminated mirror
  • The Geberit Xeno2 illuminated mirrors with a width of 40 cm do not have indirect lighting.

How to use the product

Activating the sensor

  • Hold your hand under the sensor a maximum of 2 cm away from the illuminated mirror.
    Activating the sensor 

✓ The desired function activates.

Operating concept

Setting the lighting strips

  1. Switch the indirect lighting on or off using the sensor on the left. Switch the top light strip and the mirror heating on or off using the sensor on the right.
    Setting the lighting strips 

  2. Use the two sensors in the middle to dim or lighten the top light strip (direct lighting).
    Setting the lighting strips 

Care instructions

You have selected a product with a high-grade surface. Please follow the care instructions below.

The manufacturer does not assume any liability for product damage that arises as a result of incorrect care and handling.

General care instructions

  • Never use cleaning agents that contain chlorine or acid or that are corrosive.
  • Never use cleaning agents that are abrasive or may scratch the surface.
  • Never use sharp or pointed objects when cleaning.
  • Make sure that an efficient source of ventilation and an appropriate room temperature are present in your bathroom.
  • Protect the surface from bleaching due to extreme light and sun exposure.

Care instructions for mirror surfaces

Please note the following when cleaning mirror surfaces:

  • Use a damp chamois leather or a soft, lint-free cloth.
  • Remove drops from the edges of mirror surfaces immediately.

Cleaning surfaces

  1. Clean the surfaces. Please follow the corresponding care instructions.
  2. Dry the surfaces with a soft, lint-free cloth.

CUSTOMER SUPPORT

Geberit International AG
Schachenstrasse 77, CH-8645 Jona
documentation@geberit.com
www.geberit.com
72057598283389451 © 05-2024
968.609.00.0(03)Logo

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

GEBERIT User Manuals

Related Manuals