Shenzhen Hejiaxing Electronics B094K1M76N Flame Atmosphere Speaker Instructions

Shenzhen Hejiaxing Electronics B094K1M76N Flame Atmosphere Speaker

Product information

• Button control, easy to use
• Flame lamp
• Night light
• When using both two wireless speakers.the left and right channels be separated to be on the box.Stereo output crdates perfect sound. (Notice:When using a single wireless speaker.the left and right channels will be combined to output.)
• Wireless speaker function
• While LED light flashes. shows the wireless speaker is ON. While LED light lights in long lime.shows wireless speaker connected successfully.
• When charging.it shows the red light.The red light goes off. shows the lamp full charged.
• IP65 dustproof and waterproof

Technical Parameters

Flame Lamp mode

The flame lamp and speaker are independently designed and controlled. Short press the light key for the firsltime, and the flame light will turn on. Short press the light key for the second time to turn on the night light, and long press the light key to adjust the brightness or darkness of the night light. Short press the light key for the third lime, the night light goes out, and the cycle repeats in sequence.

Wireless speaker mode

Single speaker use

• Long press <.!) button to turn on speaker and with a beep. The blue indicator I ighl flashes slowly.search blue tooth name “AJ 100” on the phone. After the connection is successful, the indicator light will be always on and accompanied with a beep.
• Short press – button to switch to the previous song, long press to lower the volume.
• Short press + button to switch to next song, long press to increase the volume. When the volume reaches the maximum, there will be a beep.
• Long press IJloll button to cancel pairing with mobile phone.
• Short press lJloll button to pause or resume playing.

Double Speaker Use

• Long press <.!) button at same lime to turn on the two speakers, short press or double press the <.!) button of any speaker to enter the pairing. After the pairing is successful, the indicator light will be on and there will be a beep.
• If one speaker is successfully connected and to connect another one to form left and right channels, just turn on the left speaker power, and then short press or double press the <.!) button of the connected speaker. After the pairing is successful, there will be a beep.( Be sure to short or double press the speakers that have been paired successfully, otherwise the pairing cannot be successfully combined).

Double Speaker Use

• When the matching of the case is successful, the connection method of the mobile phone is the same as that of the single speaker. Only one search name will be displayed on the phone. After the connection is successful, the sound will come out from both speakers at the same time.
• If only want to use single speaker, directly turn off the power of the other or long press the IJloll button to cancel the combination.

Charging instructions

• Plug the USB into the USB port on the side of the speaker for charging, the red light will be on when charging, and ii will go out when.

Attention

• Please charge in 0’C-40″C environment
• Not recommended to use while charging
• Please unplug the charging cable in time after fully charged
• Do not charge the speaker in a humid environment

Warranty Card

Applicable for

• Since buying date.the user enjoys one year free repair services under normal useAfter one year.will be charged according to each component part cost.

• In case change component part,will be charged according to our company’s component part cost list.

• The following situations without free repair services in warranty period
  1)Damage caused by the natural earthquakes.rat disasters.and unnormal use.
  2)Damage caused in transportation,fall, and unproper storage.
  3)Consumable component.such as spare parts,batteries,light bulbs.etc.
  4)Warranty information records is not complete.no purchase date, no buying shop seal,etc.
  5)Featured using environment,such as humidity.sulfur area, high salty and onboard,elc,easy corrosion area.
  6)Using not according to the instructions.
  7)Special offer.

• When return to factory for repair.the user should make sure the product packed properly to avoid any damage during transportation.

• Factory not responsible for the damages caused by the users themselves unproper disassemble.

Attention

• In order to use the speaker correctly, ensure the good performance of the speaker, please read carefully and observe below:
• Please do not impact the mainframe seriously
• Please do not contact benzene, diluent and other chemicals
• Please do not close to the magnetic and electric field
• Please avoid directly lighting and heating appliances
• Please do not repair, disassemble, transform by users themselves

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>