Shenzhen Hejiaxing Electronics AJ200 Flame Speaker User Manual

Flame speaker

Please read carefully before use

Product information

• Flame lamp
• Night light
• Wireless speaker function
• When using both two wireless speakers, the left and right channels be separated to be on the box.Stereo output creates perfect sound.(Notice: When using a single wirelessss speaker, the left and right channels will be combined to output.)
• When charging, it shows the red light. The red light goes off, showing the lamp fully charged
• IP65 dustproof and waterproof

Technical Parameters

Flame Lamp Mode

Short press the light key “ “for the first time, and the flame light will turn on. Short press the light key “ “for the second time to turn on the night light, and long press the light key “ ” to adjust the brightness or darkness of the night light. Short press the light key ” ” for the third time, the night light goes out, and the cycle repeats in sequence.

Wireless speaker mode

Single speaker use

• Long press button to turn on speaker and with a beep. The blue indicator light flashes slowly, search bluetooth name “AJ200” on the phone. After the connection is successful, the indicator light will be always on and accompanied with a beep.
• Long press button to switch to the previous songshort press to lower the volume.
• Long press button to switch to next song, short press to increase the volume. When the volume reaches the maximum, there will be a beep.
• Long press and button to cancel pairing with mobile phone.
• Short press button to pause or resume playing.

Double speakers use
Two speakers pairing

• Long press button at same fime to turn on the two speakers, double press the button of any speaker to enter the pairing. After the pairing
  is successful, the indicator light will be on and there will be a beep.

• If one speaker is successfully connected and to connect another one to form left and right channels, just turn on the left speaker power, and then double press the button of the connected speaker. After the pairing is successful, there will be a beep. (Be sure to double press the speakers that have been paired successfully, otherwise, the pairing cannot be successfully combined).

Double Speaker Use

• When the matching of the case is successful, the connection method of the mobile phone is the same as that of the single speaker. Only one search name will be displayed on the phone. After the connection is successful, the sound will come out from both speakers at the same time.
• If only want to use single speaker, press the and button to cancel the combination.
• If paired are formed, long press the button of any one of the speakers, and both speakers will be turned off at the same time.
  Tips:
  When the device button does not respond or freezes, please press and hold the power button for more than 8 seconds to reset.

Charging instructions

Plug the TYPE-C cable into the USB port on the back of the speaker fot charging, the red light will be on when charging, and it will go out when fully charged.

Attention

• Please charge in 0°C-40°C environment
• Not recommended to use while charging
• Please unplug the charging cable in time after fully charged
• Do not charge the speaker in a humid environment

Warranty Card

Applicable for

• Since buying date, the user enjoys one-year free repair services under normal use. After one year, will be charged according to each component part cost.
• In case change component part, will be charged according to our company’s component part cost list.
• The following situations without free repair services in warranty period

1. Damage caused by natural earthquakes, rat disaster, and unnormal use.
2. Damage caused in transportation, fall, and unproper storage.
3. Consumable component, such as spare parts, batteries, light bulbs, etc.
4. Warranty information records is not complete, no purchase date, no buying shop seal, etc.
5. Featured using environment, such as humidity, sulfur area, high salty and on board, etc, easy corrosion area.
6. Using not according to the instructions.
7. Special offer.

• When return to factory for repair, the user should make sure the product packed properly to avoid any damage during transportation.
• Factory not responsible for the damages caused by the users themselves unproper disassemble.

Important
Thank you for purchasing our products.
To guarantee your rights, please fill in this form properly, Thank you

Name: __
Address:
Telephone : ____
Invoice number:
Purchase date: ___
Item number: ____
Dealers: ____

Note: this field requires the dealer’s seal!
Warning: please keep this warranty paper for repair presentation.

Attention

• In order to use the speaker correctly, ensure the good performance of the speaker, please read carefully and observe below:
• Please do not impact the mainframe seriously
• Please do not contact benzene, diluent, and other chemicals
• Please do not close to the magnetic and electric field
• Please avoid directly lighting and heating appliances
• Please do not repair, disassemble, transform by users themselves

FCC Caution：
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>