nVent CCC0187 Cushion Clamp Insulated Strut Clamp Owner’s Manual
- August 7, 2024
- nVent
Table of Contents
nVent CCC0187 Cushion Clamp Insulated Strut Clamp
Product Usage Instructions
Installation
- Ensure the pipe or tube to be clamped has a compatible outer diameter of 47.6 mm.
- Place the CADDY CUSHION CLAMP INSULATED STRUT CLAMP around the pipe/tube at the desired location.
- Secure the clamp in place using appropriate fasteners according to your installation requirements.
Usage
- This clamp is designed to securely hold pipes or tubes with a 1 1/2 size and 40 NB/DN.
- Avoid exceeding the maximum load capacity specified for this clamp during usage.
- Regularly inspect the clamp for any signs of wear or damage and replace if necessary.
FAQ
- Q: Can this clamp be used for outdoor applications?
- A: The CADDY CUSHION CLAMP INSULATED STRUT CLAMP is suitable for both indoor and outdoor applications, but it is recommended to protect it from extreme weather conditions to ensure longevity.
- Q: What is the maximum load capacity of this clamp?
- A: The maximum load capacity of this clamp is not specified in the provided information. It is advised to refer to the official product documentation or contact nVent customer service for detailed load capacity information.
OVERVIEW
CATALOG NUMBER
- CCC0187
FEATURES
- Fits into open side of strut channel
- Plastic cushion is hinged to spread apart for easy installation
- Reduces noise and absorbs shock by gripping the pipe/tube firmly
- Square neck of carriage bolt prevents over-tightening
- Nylon locknut prevents loosening under vibration
- FM® Specification Tested (from 3/8″ to 4″ of Copper Tube Size)
PRODUCT ATTRIBUTES
- Article Number: 598903
- Material: Steel; Polypropylene
- Finish: Zinc Chromate
- Outer Diameter: 47.6 mm
- Pipe Size: 1 1/2″
- NB/DN: 40
- Width: 39.7 mm
- A: 59 mm
- B: 81.5 mm
DIAGRAMS
WARNING
nVent products shall be installed and used only as indicated in nVent’s product instruction sheets and training materials. Instruction sheets are available at www.nvent.com and from your nVent customer service representative. Improper installation, misuse, misapplication or other failure to completely follow nVent’s instructions and warnings may cause product malfunction, property damage, serious bodily injury and death and/or void your warranty.
CONTACTS
North America
- +1.800.753.9221
- Option 1 – Customer Care
- Option 2 – Technical Support
Europe
- Netherlands:
- +31 800-0200135
- France:
- +33 800 901 793
Europe
- Germany:
- 800 1890272
- Other Countries:
- +31 13 5835404
APAC
- Shanghai:
- + 86 21 2412 1618/19
- Sydney:
- +61 2 9751 8500
Our Brands
Our powerful portfolio of brands:
- CADDY
- ERICO
- HOFFMAN
- RAYCHEM
- SCHROFF
- TRACER
© 2024 nVent. All nVent marks and logos are owned or licensed by nVent
Services GmbH or its affiliates. All other trademarks are the property of
their respective owners.
nVent reserves the right to change specifications without notice.
References
- Building a more Sustainable and Electrified World | nVent
- Building a more Sustainable and Electrified World | nVent
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>