exway R3 Smart Bluetooth Remote Controller User Manual

Exway R3 Remote
User Manual

R3 Smart Bluetooth Remote Controller

Quick keyword search
If you’re viewing this manual in PDF, use the PDF reader’s keyword search to find what you’re looking for quickly.
Skip ahead with the table of contents
Clicking on the sections and subsections will bring you to the selected page.
Print a hardcopy
This manual can be printed for offline viewing.
Tips
Symbols
Important information to note
Learning resources
Pair the comprehensive PDF manual with our video tutorial to better understand the features and functions of the R3 remote.
Download the ExSkate app
You’ll need the ExSkate app to access the full range of features on the R3 remote. Download it from the App Store or Google Play Store to get the best experience with your R3 remote.

https://apps.apple.com/cn/app/exskate/id1634367689| https://play.google.com/store/apps/details?id=com.exwaydd.android
---|---
Requires iOS 11.0 and above.| Requires Android 6.0 and above.

The R3 remote is not compatible with our older Exway app. Make sure to install the ExSkate app instead.

About The Exway R3 Remote

About The Exway R3 Remote
We took the ergonomic and intuitive-to-use shape of our standard remote and gave it a makeover – on the inside. More powerful hardware and advanced firmware bring new features like route tracking, OTA and offline firmware updates, Bluetooth 5.0, while keeping all the functionality of the old remote.
All new hardware
Powering the R3 is our new MCU 3.0 chip, designed to interface with the new ESC 3.0 controller and ExSkate app. Boards with the older ESC 2.0 (X1 Max, Flex ER, Wave, Atlas Carbon, and earlier generations) are not compatible.
Redesigned UI
We’ve optimized the home screen layout with more real-time information. Everything you need to know now takes a quick glance, without using a mobile app.
Getting to Know the R3

The R3 remote ships with beginner mode, which limits the remote to basic ride functions. You’ll be able to access the full functionality after riding 6mi (10km) with it.

Remote Interface

Navigation Guide

| Power ON/OFF
Hold button A for 3 seconds
---|---
| System Menu
Hold button A for 7 seconds
(While remote is OFF)
| Change Ride Mode
Press button A once
| Toggle Cruise Control
Press button A twice while throttle is engaged
| Parking Brake
Fully engage brakes, then press button A twice
| Toggle Forward/Reverse
Press button A 3 times
| Tank Mode
With throttle neutral, press button A twice
| 2WD/4WD Switch
Press button A 4 times
| Toggle Turbo Mode
Press button A 5 times
| Toggle Speed Limit
Press button A 6 times

Turbo mode, Tank mode, Forward/Reverse, Speed Limit toggling will only take effect while the board is stationary.
Cruise Control will only take effect when the current speed is under 15mph (25km/h) and “CRUISE CONTROL” is enabled in the system menu.
*While “SHIFT LOCK” is enabled in the system menu, you will only be able to switch ride modes while the board is stationary. While “SHIFT LOCK” is disabled and the throttle is in the neutral position, you can switch ride modes while moving.
Note: Two short haptic pulses and no response from the display when pressing a button indicates an unsuccessful input.

System Menu

1/9. RE-PAIR1: Rear Controller Pairing

2/9. RE-PAIR2: Front Controller Pairing

*RE-PAIR2 only accessible on 4WD boards
3/9. WD MODE: 2WD/4WD Drive Mode Selection

*Selecting 4WD without first pairing the front controller (ESC2) will bring up a prompt to pair ESC2
4/9. CALIBRATION: Throttle Wheel Calibration

5/9. F/W VERSION: View Controller(s) and Remote Firmware Versions

6/9. SPEED UNIT: Switch Between Imperial/Metric Units

7/9. ADVANCED: Advanced Settings

*This menu is intended for drivetrain customization with aftermarket motors, pulleys, etc.
8/9. OTHER: Other Settings

*Options (such as Turbo) may vary between different boards.

Advanced Settings Menu

1/8. QUICK SETUP: Guided Drivetrain Setup and Configuration

*Setup and configuration includes settings 2-6, and automatic motor detection.
2/8. POLE PAIRS: Configure Pole Pair Count

3/8. DRIVE GEAR: Configure Tooth Count

4/8. WHEEL GEAR: Configure Tooth Count

5/8. WHEEL SIZE: Configure Diameter in MM

6/8. BRAKE LEVEL: Configure Braking Strength

7/8. MAX SPEED

This menu is meant for DIY builders and experienced riders who wish to modify their boards with aftermarket parts including motors, pulleys, gears, etc. Beginners should refrain from changing these settings as it may cause unexpected behavior from the board while riding.

Other Settings

1/9. TURBO MODE: Enable/Disable Quick Toggle

*Enabling Turbo mode unlocks the full performance potential of the board.
2/9. FREE MODE: Enable or Disable

*Enabling Free Mode allows you to ride in reverse by scrolling backwards on the throttle.
3/9. CRUISE CONTROL: Enable/Disable Quick Toggle

*Cruise Control will automatically deactivate when current speed exceeds the set speed by 2mph or 3km/h.
4/9. SHIFT LOCK: Enable/Disable

*SHIFT LOCK DISABLED: Ride mode can be changed while moving and throttle in the neutral position.
SHIFT LOCK ENABLED: Ride mode can only be changed when board is stationary.
5/9. SAFE CHARGE: Toggle On-The-Fly Charging (AUXPack)

*Enabling Safe Charge will disable the drivetrain while charging.
Disable Safe Charge when using an external battery like the AUXPack.
6/9. F/W UPGRADE: Upgrade Remote and Controller Firmware

7/9. UNPAIR PHONE: Unpair Current Paired Phone

OTA Updates

Checking for available updates

1. Download and install the “ExSkate” app on your mobile device
2. Once in the app, pair and connect to your remote by tapping the “Add Device” button. Make sure the app has Bluetooth permissions granted and Bluetooth is turned on during this process.
3. If a beta firmware update is available, you can find it by tapping the button at the upper right (1) and then manually start the update by tapping Device Update (2).
4. If an official firmware update is available, you’ll get a prompt to install it in your device menu automatically. Some updates may be essential to continue using the app with your device.

R3 Remote Auto-Update
Once the firmware has been downloaded, the app will automatically start uploading it to the

Board Firmware Auto-Update
A prompt will appear on the remote when downloading firmware from the app if a new version is available for your board. Selecting YES will start the board update once the remote firmware is installed and remote restarted.

If you wish to update the board at a later time, selecting “NO” will save the new firmware to the remote.
4. Board Firmware Manual Update
In the system setting’s “OTHER” menu, you’ll find the option “F/W UPGRADE” to upgrade your board’s firmware manually if you’ve previously downloaded it without installation.
“SETTINGS” -> “OTHER” -> “F/W UPGRADE” -> “YES”

• NEW: Latest firmware version.
• ESC1: Current firmware version on the rear controller.
• ESC2: Current firmware version on the front controller (4WD only).
• If the new version number is higher than the current version number, select “YES” to upgrade.

Firmware Upgrade Complete
Once the update is complete, you’ll see the status on the remote display change to “UPDATE FINISHED”, and the board will be ready to go after a quick auto-restart. Head back to the home screen on your remote to start riding again!

8/9.AUTO HOLD

If you’re pairing your remote and phone for the first time, navigate to the system menu on the remote to enable Bluetooth, then use the mobile app to initiate the pairing process.
Once your remote and phone has been paired, other devices will be unable to discover the remote until the current device is unpaired using the “UNPAIR PHONE” setting.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>