HH Tensor SOLO:BK Electronics Professional Audio User Manual

Tensor SOLO:BK Electronics Professional Audio

Introduction

This user manual contains all the information needed to safely setup, operate, and maintain the TENSOR-SOLO Ultra Portable Column PA System. It is crucial to read the entire manual before using the system to ensure proper functioning and to avoid any potential hazards.

Product Overview
The TENSOR-SOLO system includes a subwoofer with an amplifier, two identical spacer pillars, and a column loudspeaker. It features an elegant design available in two colors, black and white.

Setup Instructions
To assemble the TENSOR-SOLO system, connect the subwoofer and amplifier labeled as ‘A’ to the two spacer pillars ‘B’, and then attach the column loudspeaker ‘C’. The system utilizes a quick connect push fit mechanism for easy setup.

Control Interfaces
The TENSOR-SOLO system has various controls divided across different channels. It includes level controls, line/mic switches, reverb switches, a Bluetooth indicator, a master volume, and a DSP preset selection.

Main Controls
The main controls of the system include the master volume, reverb level, and mode selection, which offers presets such as music, band, natural sound, and speech.

Power Connection
The system has a user switchable SMPS power supply which can be set to either 100-120V or 220-240V~ 50/60Hz. It also includes protection features like short circuit and thermal overload protection, as well as a multi-band limiter.

Specifications

• Model: Tensor-SOLO:BK (Black) / Tensor-SOLO:WH (White)
• System Type: Ultra Portable Column PA System
• Frequency Response: 50-20kHz
• Max SPL (1M) (Peak): 123 dB SPL
• Power Rating: 300W RMS, 1200W Peak
• Amplifier Type: Class D
• Power Supply: User Switchable SMPS 100-120 or 220-240V~ 50/60HZ
• Protection: Short circuit, Thermal overload, multi-band limiter
• Inputs: 2x Combo (XLR/Jack) balanced/unbalanced input with Mic/Line preset switch, 3.5mm Stereo Aux in, 2x RCA, Bluetooth V5.0 Audio Receiver
• Outputs: Balanced XLR mix out
• Controls: CH1-3 Level, CH1-2 Reverb on/off switch, Master Volume, Bluetooth Pairing, EQ preset
• LF Driver: 8″ HH Long Throw Woofer
• Hi/Mid Drivers: 6x 2.75″
• Cabinet: Robust Polypropylene Enclosure (Sub), ABS (Sat)
• Accessories: 1x Padded Subwoofer Slip Cover, 1x Padded 3 Piece Column Carry Bag included
• Other: Illuminating HH Logo
• Dimensions:
  • Overall Height (assembled): 1975mm (77.8″)
  • Overall Weight (assembled) Top Unit: 14.1Kg (31.1 lbs)
  • Top Unit dimensions (HWD): 560 x 105 x 105mm (22 x 4.1 x 4.1″) [Spacers included]
  • Top Unit Weight: 1.7Kg (3.7 lbs) [Spacers: 1.1Kg (2.4 lbs)]
  • Sub Unit dimensions (HWD): 403 x 320 x 300mm (15.9 x 12.6 x 11.8″)
  • Sub Unit Weight: 9Kg (19.8 lbs)
  • Carton dimensions (HWD): 660 x 510 x 420mm (26 x 20.1 x 16.5″) [0.142 M3]
  • Packed Weight (Inc Accessories): 17.1Kg (37.7 lbs)
  • EAN13: 5060109458626

Product Usage Instructions

Erecting the System
Follow the steps outlined in the manual to set up the Tensor-SOLO Subwoofer and amplifier along with the spacer pillars and column loudspeaker.

Controls Overview
The system features various controls including level adjustments, switches for line/mic and reverb, Bluetooth display, reverb level control, and DSP preset selection.

Main Controls
You can adjust the reverb level and select different DSP presets using the main controls provided on the system.

Connecting Power
Use the appropriate power supply based on your voltage requirements to connect the system to power.

Inputs and Outputs
The system offers multiple input options including combo
XLR/Jack inputs, stereo aux in, RCA inputs, and Bluetooth connectivity. It also provides a balanced XLR mix out for output.

Speaker Drivers and Cabinet
The system includes an 8″ HH long throw woofer for low frequencies and six 2.75″ drivers for mid/high frequencies. The cabinet is made of robust polypropylene for the sub unit and ABS for the satellite unit.

Accessories and Dimensions
The system comes with padded covers for the subwoofer and column carry bag. Refer to the dimensions provided for assembling and handling the system effectively.

Dimensions and Weight
The assembled system stands at 1975mm (77.8 inches) tall, with the sub unit measuring 403 x 320 x 300mm (15.9 x 12.6 x 11.8 inches).

Safety and Warnings
To prevent electrical shock or fire hazard, the TENSOR-SOLO system should not be exposed to rain or moisture. It is important to read all safety instructions before operation.

Approvals and Compliance

For further information on product approvals and compliance, please visit HH Electronics Approvals.

Manufacturer Information

The TENSOR-SOLO system is manufactured by HH Electronics, which is part of the Headstock Group. For up-to-date information, visit HH Electronics.

Frequently Asked Questions (FAQ)

Can I use the Tensor-SOLO system outdoors?

While the system is portable, it is recommended to avoid exposing it to direct sunlight or moisture to ensure longevity.

How do I pair Bluetooth devices with the system?

Activate Bluetooth pairing mode on the system and search for available devices on your smartphone or tablet to establish a connection.

What is the power rating of the Tensor-SOLO system?

The system has a power rating of 300W RMS and can peak at 1200W to deliver powerful sound output.

How do I assemble the TENSOR-SOLO system?

Begin by connecting the subwoofer and amplifier to the spacer pillars, then attach the column loudspeaker using the quick connect push fit.

What are the power requirements for the TENSOR-SOLO system?

The system uses a switchable SMPS that can be set to 100-120V or 220-240V~ 50/60Hz, with built-in protection features.

Can I use the TENSOR-SOLO system outdoors?

The system should not be exposed to rain or moisture to prevent electrical shock or fire hazard. Use in covered or indoor environments is recommended.

References

• Approvals
• HH Electronics

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>