Gosinggo GS-65 Bluetooth Sound Bar User Guide

Gosinggo GS-65 Bluetooth Sound Bar

Product Information

The GS-65 is a 2.1 Bluetooth sound bar that comes with a wireless subwoofer. The sound bar has multiple input options, including HDMI ARC, Optical, Line- In, and USB. It also has a remote control for easy operation and an EQ function to adjust the sound according to your preference.

Box Contents

• GS-65 Sound bar x 1
• Remote Control x 1
• Power Adapter x 1
• User Manual x 1
• AUX In Cable x 1
• 3.5mm to 3.5mm Line In Cable x 1
• Subwoofer x 1

Instructions Guide

Using the HDMI ARC Input
To use the HDMI ARC input, you will need an audio source with an ARC audio output and an ARC audio cable (not included). Follow the steps below:

1. Connect one end of the ARC audio cable to the HDMI ARC input on the sound bar (labeled as “ARC”).
2. Connect the other end of the ARC audio cable to the ARC audio output on your audio source.
3. Turn on your audio source and the sound bar. The sound bar should automatically detect the audio signal from the audio source.
4. Use the remote control or the control buttons on the sound bar to adjust the volume and other settings as desired.

Using the Optical Input

To use the Optical input, follow the steps below:

1. Connect one end of an optical cable to the Optical input on the sound bar (labeled as “OPTICAL”).
2. Connect the other end of the optical cable to the Optical output on your audio source.
3.  Turn on your audio source and the sound bar. The sound bar should automatically detect the audio signal from the audio source.
4. Use the remote control or the control buttons on the sound bar to adjust the volume and other settings as desired.

Using the Line-In Input

To use the Line-In input, follow the steps below:

1. Connect one end of a 3.5mm to 3.5mm Line In cable to the Line-In input on the sound bar (labeled as “LINE IN”).
2. Connect the other end of the Line In cable to the Line-Out or Headphone-Out port on your audio source.
3. Turn on your audio source and the sound bar. The sound bar should automatically detect the audio signal from the audio source.
4. Use the remote control or the control buttons on the sound bar to adjust the volume and other settings as desired.

Connecting to the Mains Supply

To connect the GS-65 sound bar to the mains supply, follow the steps below:

1. Plug one end of the power adapter into the DC power input on the sound bar (labeled as “DC IN”).
2. Plug the other end of the power adapter into a wall outlet.

Connecting the Sound bar and Subwoofer

To connect the wireless subwoofer to the GS-65 sound bar, follow the steps below:

1. Turn off the sound bar and the subwoofer.

2. Place the subwoofer within 10 meters of the sound bar.

3. Press and hold the pairing button on the back of the subwoofer until the LED indicator starts flashing.

4. Press and hold the Mode/Pair button on the sound bar until the
   LED indicator starts flashing.

5. The sound bar and subwoofer should automatically pair with each other. Once paired, the LED indicators on both devices should stop flashing.

6. Turn on the sound bar and subwoofer. The sound bar should automatically detect the subwoofer and use it to enhance the bass performance.

Using the Bluetooth Operation

To use Bluetooth operation on the GS-65 sound bar, follow the steps below:

1. Turn on the Bluetooth function on your mobile device or computer.
2. Press and hold the Mode/Pair button on the sound bar until the LED indicator starts flashing.
3. Select “GS-65” from the list of available Bluetooth devices on your mobile device or computer.
4. The sound bar should automatically pair with your mobile device or computer. Once paired, the LED indicator on the sound bar should stop flashing.
5. Play music or other audio content on your mobile device or computer. The sound should now come through the GS-65 sound bar.
6. Use the remote control or the control buttons on the sound bar to adjust the volume and other settings as desired.

Using the USB Operation

To use USB operation on the GS-65 sound bar, follow the steps below:

1. Insert a USB drive containing MP3 or WMA files into the USB input on the sound bar (labeled as “USB”).
2. The sound bar should automatically detect the USB drive and start playing the first available audio file.
3. Use the remote control or the control buttons on the sound bar to navigate through the audio files and adjust the volume and other settings as desired.

Troubleshooting

If you encounter any issues with the GS-65 sound bar, refer to the troubleshooting section of the user manual for possible solutions.

Specifications

• Power output: 60W (Sound bar) + 40W (Subwoofer)
• Frequency response: 40Hz – 20kHz
• Input sensitivity: 500mV
• Signal-to-noise ratio: ≥70dB
• Bluetooth version: 4.2
• Dimensions (Sound bar): 900mm x 54mm x 85mm
• Dimensions (Subwoofer): 170mm x 350mm x 345mm

Wall Mount Installation Guide

If you wish to mount the GS-65 sound bar on a wall, refer to the wall mount installation guide in the user manual for instructions.

Safety Information

Before using the GS-65 sound bar, read the safety information section of the user manual carefully to ensure safe and proper use of the product.

What’s In The Box?

Box Contents

1. GS-65 Sound bar x 1

2. Remote Control x 1

3. Power Adapter x 1

4. User Manual

5. AUX In Cable x 1

6. 3 .5mm to 3 .5mm Line In Cable x 1

7. Subwoofer x 1

8. GS-65 Sound bar

9. Remote Control

10. Power Adapter

11. User Manual

12. AUX IN Cable

13. 3.5mm to 3.5mm Line In Cable

14. Subwoofer x 1

Controls And Functions

Side View/ Control Buttons

1. Power On/Off

2. Mode/Pair
   (short press/long press)

3. Volume-/Previous
   (short press/long press)

4. Volume+/Next
   (short press/long press)
   Back View

5. DC Power Input

6. Subwoofer Output

7. Line-In Input

8. Optical Input

9. ARC Input

10. USB Input
    Remote Control

11. Power On/Off
    Switch the unit between on and Standby mode

12. Volume +
    Press to increase the volume

13. Back Step
    Use in USB or Bluetooth mode to go back a track .

14. Play/Pause
    Press to play and pause

15. Volume –
    Press to decrease the volume

16. Bass Increase
    Press to increase the bass

17. EQ
    Press the button to adjust the equalizer. Press and hold the button to turn the sound bar LED light on and off.

18. Bass Decrease
    Press to decrease the bass

19. MODE
    Press button reputedly to switch between sound bar modes

20. Forward Step
    Use in USB or Bluetooth mode to go forward a track

21. Treble Increase
    Press to increase the treble

22. Treble Decrease
    Press to decrease the treble

Using the Remote Control
The remote control sensor at the front of the sound bar is sensitive to the remote control’ s commands up to a maximum of 8 metres away and within a maximum arc of 30 degrees.

Please note that the operating distance may vary depending on the brightness of the room.

Sound bar Wall Mount Dimensions

Subwoofer
6.5Inch Wireless Subwoofer

Connecting to the sound bar

Support
Thank you for your purchasing the GS- 65 Sound bar.
Please follow the guidance of the user manual to set up your new purchase and begin enjoying its features.

Product Instructions Guide

Using the HDMI ARC Input

You will need: An audio source with an ARC Audio Output and a ARC Audio cable ( not included) .
Connect the ARC Audio cable to the ARC output on the audio source and to the ARC Input on the sound bar.

Press the POWER button on the sound bar or POWER button directly on the remote control ( Rem. 10 ) to switch on the unit. Press the MODE button on the remote control ( Rem. 18 ) to switch to ARC mode or select the Mode button on main unit repeatedly to select theARC mode.

Using the native controls on your connected device, make sure the audio settings are set to ARC or HDMI Audio and are turned on. Audio from the connected audio source will now be played through the speakers.

Using the Optical Input
You will need: An audio source with an Optical Audio Output and a Digital Optical Audio cable ( included) .

Connect the Digital Optical Audio cable to the optical output on the audio source and to the Optical Input on the sound bar . Press the POWER button on the sound bar or POWER button directly on the remote control (Rem.10) to switch on the unit. Press the MODE button on the remote control (Rem .18 )to switch to Optical mode or select the Mode button on main unit repeatedly to select the Optical mode.

Using the native controls on your connected device, make sure the audio settings are set to PCM or Optical Audio and are turned On. Audio from the connected audio source will now be played through the speakers.

Using the MP3 Link Connection ( Line In)
Plug one end of a 3.5mm to 3.5mm Line In cable (included) into the Line In port on the unit. Before use, disconnect any cables connected to the Stereo RCA Inputs.

Plug the other end of the cable into the audio output/headphone output on an MP3 player or other audio source .
Press the Power button on the sound bar or POWER button directly on the remote control ( Rem . 1 0 ) to switch on the unit .

Press the Mode button repeatedly on the sound bar or press the MODE button on remote control ( Rem. 1 8 ) repeatedly to enter LINE in mode.
Audio played through the connected device will now be heard through the speakers.

Connecting to the Mains Supply

• Ensure that the power supply voltage is in the voltage of 100V~240V.
• This unit is designed to use adapter.
• Connecting the unit to any other power source may cause damage to the unit .
• Unwind the mains cable to its full length.
• Connect the mains plug to a mains socket.
• Make sure the mains plug is fully inserted into the mains socket. Connect the adapter to the unit via the DC input Socket. (DC-24V- IN)

Ensure all audio connections of the unit are connected before connecting to the mains power socket.
Unplug the power cord from the outlet when the unit is use for an extended period of time.

Connecting the Sound bar and Subwoofer
Connect the subwoofer cable to the sound bar.

Please ensure that your sound bar is being mains powered and switched ‘ON’ for initial set up. To do this, press the Power button on the unit or the POWER button on the remote control .

If you are having connectivity issues, please move the subwoofer closer to the sound bar for set up.

Using the Bluetooth Operation
Pairing a Bluetooth Device for the First Time
Press the POWER button on the unit or the POWER button on the remote control (Rem.10) to switch on the unit.

Select and press the MODE button repeatedly on the remote control until in Bluetooth mode ( Rem .18 )or press the Mode button repeatedly on the sound bar to enter Bluetooth mode.

Using the native controls on your Bluetooth device, select the “GS-65” in your Bluetooth settings to pair.
Refer to the user manual for your specific device for instructions on pairing and connecting Bluetooth devices.

When successfully paired and connected, a beep will issue from the unit. After initial pairing, the unit will stay paired unless unpaired manually by the user.

If your device should become unpaired or you find it is unable to connect, repeat the above steps.

Playing Audio Wirelessly

• Follow the instructions for pairing a Bluetooth device.
• Use the native controls on the connected Bluetooth Device to select a track .
• To Play/ Pause the track or Skip Forwards/ Backwards to a selected track, use the remote control (Rem.13,12,19).
• Audio played through the connected Bluetooth device will now be heard through the speakers.

Using the USB Operation
Insert USB to Play Music Automatically .

Select and press the MODE button repeatedly on the remote control until in USB mode ( Rem.24) or press the Mode button repeatedly on the sound bar to enter USB mode.

To Play/ Pause the track or Skip Forwards/ Backwards to a selected track, use the remote control (Rem.13,12,19).

Audio played through the connected USB device will now be heard through the speakers.

PRODUCT Troubleshooting

If the sound bar does not work properly as desired, please check the following.

wall.
Check whether the power adaptor is properly connected to power outlet or not.
No sound| Check whether cables are properly installed. If they are, please try alternative cable to connect to your TV if possible.
Check unit is out of standby and in mode .
No sound from Bluetooth connection| Forget the sound bar from your device and reconnect.
Function disturbance| Switch off and unplug the unit. Leave it for 2 minutes and switch it on again .
If a particular mode is causing problems, please try an alternative connection to your TV such as Optical or Bluetooth.
Remote control does not work [properly]| Check whether the battery run out or not. Replace with a new one if necessary.
Check whether there is obstacle on the front of remote sensor.
Power Supply ( Sound bar)| DC 24V / 2.5A
---|---
Power Consumption| 2 x20W+60W
Speaker Size & Number of Speakers| 2.25″ Mid-Tweeter x 4 +6.5″ x 1
Working Environment (Temperature)| -10~ + 45C
Relative Humidity| 5% ~ 90%
Frequency Response| 40Hz – 20KHz
Bluetooth Version| V 5.0
Bluetooth Distance| ≥10M
Dimension (LxDxH) (Sound bar)| 90.6 x 10.7 x 7.0 cm(with hook / standing foot )
Dimension ( LxDxH) ( Subwoofer)| 18 x 30 x 38cm(with standing foot)

PRODUCT Wall Mount Installation

Hang the sound bar

• Place the paper guide on the wall where you want to hang the sound bar.
  

• Verify with a level gauge that the inclination angle of the sound bar is zero degrees.
  

• Locate the screw holes on the paper guide and mark a point with a pencil.

• Make the holes with the corresponding drill bit according to the type of wall.

• It is advisable to leave no more than 5mm between the head of the screw and the wall to minimize the inclination angle of the sound bar.

•  For a better sound experience, it is advisable to place the sound bar at the same height of the ear.

Quick System Installation Guide

When all the kits connecting with power supply, the subwoofer is flat placed in the middle under the sound bar, or placed closely on the left and right side of the sound bar, but not too far from the sound bar.

Detached Surround Speaker from main Sound bar to be Standing Speaker.
Each wireless surround speaker is flat placed on the left and right sides of the sofa, their speakers are facing right and left ears of people setting on the sofa.

For a better sound, the distance from left & right surround speaker to the sound bar cannot be far than 10 meters, it is better within 7 meters.

Sound bar is supported to hang on the wall by installing with a screw.

PRODUCT Safety Information

1. Read these user manual.

2. Keep these user manual.

3. Heed all Warnings

4. Follow all instructions

5. Do no clean the apparatus near or with water

6. Do not block any ventilation openings . Install in accordance with the manufacturer’ instructions

7. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus ( including amplifiers) that produce heat.

8. Protect the power from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus .

9. Only use attachments/ accessories specified by the manufacturer .

10. Unplug this apparatus during light storms or when unused for long periods of time .

11. Refer all servicing to qualified service personnel.
    Servicing is required when the apparatus has been damaged in a way, such as power- supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to the rain or moisture, does not operate normally or has been dropped.

12. No naked flame sources, such as lit candles, should be placed on the apparatus .

13. Dispose of used electrical products and batteries safely according to your local authority and regulations .

ADDITIONAL / WARNINGS
The apparatus shall not be exposed to dripping or splashing and no objects filled with liquid, such as vases, shall be places on the apparatus .
Main plug is used to disconnect device and it should remain readily operable during intended use . In order to disconnect the apparatus from the main mains completely, the mains plug should be disconnected from the main socket outlet completely .
Battery shall not be exposed to excessive heat such as sunshine, fire or the like.

RECYCLING ELECTRICAL PRODUCTS
You should now recycle your waste electrical goods and in doing so help the environment.

This symbol means an electrical product should not be disposed of with normal household waste. Please ensure it is taken to a suitable facility for disposal when finished with.

IMPORTANT: Please read all instructions carefully before use and keep for future reference.

Risk of electric shock.
Do not open

Read all instructions carefully before use and keep for future reference

When servicing, use only identical replacement parts

CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN

IMPORTANT: Please read all instructions carefully before use and keep for future reference.

FCC Statement

FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

RF Exposure Statement
To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance of 20cm the radiator your body. This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>