EPH CONTROLS TA230 Thermal Actuator Installation Guide
- June 12, 2024
- EPH CONTROLS
Table of Contents
EPH CONTROLS TA230 Thermal Actuator
Installation Instructions
For use in normal environments.
CAUTION! Do not use if the cable is defective.
- Disconnect the power supply from any defective appliances.
- The factory setting is (NC) Normally Closed
- Guidelines for the electrician; Level of contamination 2; As per EN60730
- When changing from normally closed to normally open, live components are exposed. Therefore, disconnect the power when changing.
EPH Controls Ireland
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>