xpr XP Series RFID Keypads and Readers Installation Guide
- August 7, 2024
- xpr
Table of Contents
XP Series RFID Keypads and Readers
Product Specifications
- Model: XP, XP-K & XPM
- RFID Keypads and Readers
- Power Supply: 9 – 15 V DC
- Max Current Consumption at 12 V DC: 100 mA
- Reading Distance: Up to 9 cm for XP/XP-K, Up to 8 cm for XPM
- Operating Temperature: External, IP65
- Dimensions: XP & XP-K 107 x 80 x 27 mm & XPM 114 x42 x 27 mm
Product Usage Instructions
Mounting
To mount the device:
- Surface mount the device securely.
- Wrap the wires around the ferrite core provided in the kit to reduce EMI.
Power Supply Connection
Connect the power supply using the following connections:
- +12V IN
- GND (Ground)
LED Indicators
The device features LED indicators for visual feedback. Green LED indicates
power input, and Red LED indicates Wiegand output.
RS-485 Connection
Connect the RS-485 lines A(+) and B(-) for communication.
Buzzer and Tamper Connections
Connect the buzzer input and tamper connections as needed for your setup.
Frequently Asked Questions (FAQ)
What is the maximum reading distance of the device?The device has a reading
distance of up to 9 cm for XP/XP-K and up to 8 cm for XPM.
XP, XP-K & XPM: RFID Keypads and Readers
INSTALLER’S MANUAL
PRODUCT REFERENCES
XP & XP-K
MOUNTING
XPM
MOUNTING
FERRITE CORE MOUNTING
- Wrap the wires around the ferrite core (1 turn).
The ferrite core is provided with the kit and it is used to reduce the EMI.
TECHNICAL FEATURES
TECHNICAL FEATURE
POWER SUPPLY| 9 – 15 V DC
MAXIMUM CURRENT CONSUMPTION AT 12| 100 mA
SOUND INDICATOR| Internal buzzer/B
LED INDICATORS| RGB (Red, Green, Blue)/
USB-TYPE C CONNECTOR| Built-in USB-Type C connector for protocol selection,
configuration and firmware update
READING DISTANCE| Up to 9cm for XP/XP-K,Up to 8cm for XPM
ENVIRONMENTAL RATING/| Outdoor, IP65/
OPERATING TEMPERATURE| -30°C to +70°C/ -30°C à +70°C
-30°C a +70°C/ -30°C to +70°C da -30°C a +70°C/ -30°C tot +70°C
OPERATING HUMIDITY| 5% – 95% relative humidity, non-condensing
MOUNTING| Surface mount
CABLING CONNECTION| Termina
DIMENSIONS (H X W X D)| XP & XP-K 107 x 80 x 27 mm & XPM 114 x42 x 27
Impact protection rating| XP & XPM: IK 11 XP-K: IK 10
TERMINALS
XP, XP-K & XPM: TERMINAL BLOCKS AND DIPSWITCH/BORNIERS ET DIPSWITCH
DIPSWITCH
WIRING
WIRING| DESCRIPTION DESCRIPTION G| WS4 CONFIGURATION|
WIEGAND CONFIGURATION CONFIGURATION WIEGAND
---|---|---|---
Max length Longueur| Cable Length| 80 m| 150 m
CABLING| Recommendedcabletype| Multiconductor cable 2 twisted pair with
shielding
| Untwisted, shielded, 0.22 mm2 min. For longer distance above 20 m use larger diameter.
SIGNALISATION
SIGNALISATION| DESCRIPTION DESCRIPTION| WS4 CONFIGURATION E|
WIEGAND CONFIGURATION
---|---|---|---
Reader ON-LINE Lecteur En| Reader is in communication with controller| Managed
by Controller| Managed by Controller
Reader OFF-LINE| Reader lost communication with controller
| Red LED Blinks fast
|
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>