aseko 12086 Hydrostatic Level Meter User Manual
- June 13, 2024
- aseko
Table of Contents
aseko 12086 Hydrostatic Level Meter
Hydrostatic Level meter #12086
Hydrostatic Level meter
The compact hydrostatic level meter contains a silicon tensometric sensor and evaluation electronics in durable teflon housing. From the teflon housing comes the original cable which contains the original connecting cables and an atmospheric pressure sampling tube. At the end of the original cable is the terminal box. The front side of the teflon housing is equipped with a removable cover, preventing mechanical damage to the membrane.
The level meter monitors the water level based on hydrostatic pressure
measurements.
The length of the original cable is 4 meters.
Its measuring range is by default set to 0 – 200 cm.
The level meter is compatible with the ASIN AQUA series:
Home, Oxygen, Salt, Profi, and lan controller ASIN Pool.
Installation
Installation is done by securing the teflon probe of the level meter in a vertical position in a:
-
buffer tank
or in a -
blind nozzle (skimmer pools)
Use a non-hermetic junction box to connect the wiring. The original cable includes an atmospheric pressure sampling tube.
The atmospheric pressure sampling tube must be passable at all times.
Never remove the terminal box.
When winding the excess cable, the diameter of the circle must be at least 30
cm!
Do not shorten the original cable or mechanically modify it in any way.
In the buffer tank where the water swirls due to a strong inflow, the level
meter teflon probe must be placed in a stilling pipe, or at least as far as
possible from the source of the swirl.
For correct connection with the ASIN AQUA and ASIN POOL follow the
instructions in the manual of the device.
Installation in buffer tank
Installation into the blind nozzle of the skimmer pool
The function of the level meter in the ASIN Aqua and the ASIN Pool
The water level is monitored in four levels. Levels are entered in centimeters in the configuration of ASIN Aqua.
