xpr MTPADP-RS-MF Keypad and Mifare RFID Reader Instruction Manual
- October 30, 2023
- xpr
Table of Contents
xpr MTPADP-RS-MF Keypad and Mifare RFID Reader
Product Information
This double technology reader offers a double access security, including a keypad and a compact 13.56 MHz reader. It can be installed either outside or inside. It comes with a RS485 bus and a backlight keypad. Its LEDs, tamper and buzzer are managed directly by the WS4. It can read Mifare Classic, Desire and Ultralight.
Features
- Surface mount
- ABS housing
- Colour: Black or silver
- Technology: Keypad + Mifare RFID (13.56 MHz)
- Keys: Backlit metallic
- Reader type: Mifare Classic, Desire and Ultralight cards
- Read range: up to 5 cm
- RS-485 output
- Green and red LEDs managed by the host *
- 1 internal buzzer (ON/OFF), managed by the host
- Tamper protection: when opened or dismantled
- Push buttons: 1
- Voltage: 9 – 14 V DC
- Current Consumption: 30 mA stand-by; 100 mA maximum.
Mechanical Characteristics
- Backlit keypad
- Orange backlight that can be easily disabled if necessary with My WS4
- The keypad changes its backlight color when the code or card is presented.
Dimensions & Colors
- 51 mm x 92 mm x 27 mm
- Available in black or silver ABS housing
Fobs & Cards
| Ref. | Features |
|---|---|
| PBX-1E-MS50 | ABS Keyfob 13.56MHz |
| PBX-2-MS50 | 0.75mm ISO Card 13.56MHz |
| PBX-2C-MS50 | 2mm NISO Card 13.56MHz |
Compatible only with our WS4 controllers. All product specifications are subject to change without notice.
Product Usage Instructions
To use the MTPADP-RS-MF reader, follow the below instructions:
- Install the reader either outside or inside using the surface mount and ABS housing.
- Connect the RS485 output to the host controller.
- Provide a voltage of 9-14 V DC to the reader.
- Present a Mifare Classic, Desfire or Ultralight card within a range of up to 5 cm or input the correct code using the backlit metallic keypad.
- The LEDs will indicate access granted or access denied based on the card or code presented.
- If the reader is tampered with, the tamper protection will be activated and the buzzer will sound.
Note that the orange backlight of the keypad can be easily disabled if necessary using My WS4. Also, the keypad changes its backlight color when the code or card is presented.
Backlit keypad
The MTPADP-RS-MF is equipped with an orange backlight that can be easily disabled if necessary with My WS4. The keypad changes its backlight color when the code or card is presented.
-
Green backlight
Access granted -
Orange backlight
Iddle mode -
Red backlight
Access denied
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>