Space Tech X3 Headphone User Manual
- August 7, 2024
- Space Tech
Table of Contents
manual
charge
The battery must be fully charged before use for the first time
- Connect the charger cable to the headphone jack.
- When charging, the indicator light shows a red light. When fully charged, the red light goes out and the blue light is displayed as fully charged.
ON/0FF
- Power on: Press and hold the multifunction button for about 6 seconds, the blue light will stay on for 1 second, and there will be a voice prompt to “turn on” until the red and blue lights flash alternately, at which point the headphones areturned on.
- Shutdown: Press and hold the multifunction button for about 5 seconds, the red light will stay on for 1 second, and there will be a voice prompt to “shut down”. At this time, the Bluetooth earphones will enter the shutdown state.
Pairing and connecting with a mobile phone
- Turn on the wireless earphones and the red and blue lights will flash alternately, indicating that the Bluetooth earphones have entered pairing mode,
- Turn on the wireless function of your phone and search for wireless devices，
- Find the wireless earphones found in the mobile search list, click to pair them, and there will be a voice prompt saying “Connected”.
- If the pairing is unsuccessful, repeat the pairing operation once.
Answer, hang up, reject, and
- Answer incoming call: When receiving an incoming call, simply press the multifunction button once.
- Hang up: When making a call or making a call, simply press the multifunction button once.
- Reject incoming calls: Press and hold the multifunction button for 2 seconds to release the call.
- Redial: Quickly press the multifunction key twice to redial the last call made by the phone.
Caller ID
- When a call is made, the wireless earphone will report the phone number, such as 1 3 8 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0,
Volume adjustment, photo taking function, and music playback
- Volume: During a call or music playback, pressing the side button briefly will change one volume, with four different volumes available It can be referred to as a cycle.
- Photography function: Turn on the phone’s camera, quickly press the side niche of the earphones twice to complete the shooting Illumination function.
- Switching between mobile input method and earphone health: Long press the earphone side button until a prompt sound appears Release your hand after 3 attempts.
- Play music: Short press the multifunction button to activate the music player on the phone. Short press the multifunction button The key can be placed/paused.
Using a pair of
- Insert the USB head of the auxiliary headphone cable into the USB socket of the earphone, and both the main and auxiliary headphones will have sound, allowing for two-way communication or listening to stereo music.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver..
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>