nordlux LED20001-1T Omari Black LED Table Lamp Instructions
- August 6, 2024
- nordlux
Table of Contents
nordlux LED20001-1T Omari Black LED Table Lamp
Product Specifications
- Model: 4J[FYNN opb
- Operating Voltage: 24V
- IP Rating: IP20
Product Usage Instructions
Installation Guidelines
- The lamp should only be installed in areas where direct contact with water cannot occur.
- Ensure the lamp is securely mounted in a suitable location away from water sources.
Power Supply
- Connect the lamp to a 24V power source.
- Make sure the power source meets the required voltage specifications.
Maintenance
- Regularly clean the lamp with a soft, dry cloth to remove dust and dirt.
- Avoid using harsh chemicals or abrasive materials that may damage the lamp surface.
FAQ
Frequently Asked Questions
- Q: Can this lamp be used outdoors?
- A: No, the lamp is designed for indoor use only to prevent direct contact with water.
- Q: What should I do if the lamp malfunctions?
- A: In case of any issues, disconnect the power supply and contact customer support for assistance.
Using Instructions
Safety Information
- IP20: The lamp should only be installed in areas where direct contact with water cannot occur.
- Class III: The lamp is only suitable for 24V.
- Z-connection: the wire cannot be replaced if damaged, and the lamp must be discarded.
- Do not exceed the maximum wattage.
- The mounting instruction must not be discarded.
- Disposal of waste equipment by users in private households in the European Union. This symbol indicates that this product must not be disposed of with your other household waste. Electrical and electronic equipment contain substances which may cause damage to human health and environment if not recycled correctly. It is your responsibility to hand over to a designated collection point for recycling of waste electrical and electronic equipment. When handing over for correct recycling you help to prevent these products straining nature and the environment unnecessarily and to protect human health. For more information regarding correct disposal, please contact your local city office, your household waste disposal service or the store where you purchased this product.
Maintenance
General maintenance: Use a soft, dry cloth for dusting, and a soft cloth wrung in lukewarm water (<50°C) with a mild detergent to remove grease stains or similar. Never use detergents containing abrasive or solvent. Only switch on the lamp once all the water has evaporated.
Specifically for mouth-blown glass: Mouth-blown glass is formed manually. Because of this unique process, air bubbles may occur in the glass, just as the thickness of the glass may vary. This is to be seen as a natural consequence of the manual process, and is what gives Mouth-blown glass its character and organic look. Always clean mouth-blown glass cold.
This product contains a light source of energy efficiency class
Contact
nordlux®
- www.nordlux.com
- Nordlux A/S • Ostre Havnegade 34 • DK- 9000 Aalborg