Puig GSX-R600 Pro 2.0 Frame Sliders Suzuki Instructions
- June 9, 2024
- Puig
Table of Contents
SUZUKI GSX-R600 ’11-’16
www.puig.tv
www.puigusa.com
info@puig.tv
info@puigusa.com
https://puig.tv/es/tuning-motos
/protectores-de-motor/protectores-de-motor-pro?bike=12208
REF 21239N PROTECTOR MOTOR PRO 2.0 / PRO 2.0 CRASH PAD / PRO 2.0 STURZPADS
INSTRUCTIONS TO ASSEMBLE
Remove the fasteners that subject the chassis to the engine. Mount the
protectors on each own side as the figure below shows. Tight the set, and
place the caps.
All the screws replaced, should be tightened to the torque specified in the
oem maintenance manual for your motorcycle. if no torque specifications are
provided in the oem maintenance manual, may be used 54Nm for all M10 screws.
Medium strength liquid thread-locker (i.e. “Loctite”) should be used to secure
all screws, bolts and nuts. All screws, bolts and nuts should be checked after
driving the first 50 km to ensure that all are tightened to the proper torque.
FOR TO ASSEMBLE THE CRASH PADS, IF YOU ARE NOT A TRAINED MECHANIC, PLEASE
CONTACT A SPECIALIST. MOTOPLASTIC, S.A. TAKES NO
RESPONSIBILITY FOR DAMAGES CAUSED BY IMPROPER INSTALLATION. THE USE OF CRASH
PADS DO NOT GUARANTEE A FULL PROTECTION IN CASE OF ACCIDENT. MOTOPLASTIC-PUIG
DECLINE ANY RESPONSIBILITY IN CASE OF MOTORCYCLE DAMAGE.
| ID. | DESCRIPTION | QTY. |
|---|---|---|
| 1 | Covers set | 1 |
| 2 | M10/150×50 DIN912 screw | 1 |
| 3 | M10/150×80 DIN912 screw | 1 |
| 4 | 20outer 10inner x2 washer DIN125/A | 2 |
| 5 | PRO 2.0 Protector | 2 |
| 6 | Right aluminium spacer | 1 |
| 7 | Left aluminium spacer | 1 |
| 8 | Metallic right platen | 1 |
| 9 | Metallic left platen | 1 |
| 10 | M10/125×60 DIN912 screw | 2 |
LEFT SIDE
- ASSEMBLY MONTAJE
2 RIGHT SIDE
Created by: www.rrdisseny.cat
REF 21239N
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>