HUION GT-220 V2 IPS Graphics Drawing Monitor User Manual

HUION GT-220 V2 IPS Graphics Drawing Monitor

Key Safety Measures

1. Please read all the specifications written in this manual and keep it for the future reference.

2. Please read all the notices and specifications on the monitor.

3. When cleaning, unplug the monitor. Do not use any cleanser, clean only with soft saturated cloth.

4. Please do not use accessories that are not recommended by the manufacturer.

5. Do not place the monitor near water sources such as bathtub, washbasin, sinks, washing machine, damp basement, swimming pool etc.

6. Prevent the monitor from fall or hit. Only placement tables that are recommended by the manufacturer or sold together with the monitor should be used. When installing wallboards and structures, please refer to the manufacturer’s specification and use installation tools that are approved by the manufacturer.

7. The grooves and holes on the main case or its rear and bottom are designed for ventilation. \

8. Prevent the monitor from overheating. Do not place the monitor on beds, sofas, carpets or in embedded devices to avoid blocking vents. Only power supplies shown on the nameplate can be used for the monitor. If you have questions about the power supply type that you are using, please consult the distributor of your monitor or the local power supply bureau.

9. This monitor is equipped with specific power plug according to your requirements when you bought it. If we do not have the power plug you have required, please buy suitable power plug in your country.

10. Power supply is the main electricity source for your monitor. Do not place anything on the AC adapter or the power wire. To protect your monitor, please switch off the power when it is not in use. During blackouts or when not in use for longer time, unplug the monitor from the socket in order to prevent surges impacting the monitor through the power wire.

11. Do not overload the socket or lengthen the power wire, it may lead to electric shocks.

12. Make sure no foreign bodies get inside the monitor trough grooves as to prevent short-circuit or fire. Prevent liquid from splashing on the monitor.

13. If the monitor has a breakdown, do not open the main case and try to repair it by yourself. Please ask a service for proper repair and maintenance.

14. When the following situations occur, please unplug the monitor and ask the service for full repair and maintenance:
    A. The power wire or plug is damaged or worn.
    B. There is liquid splashed on the main case.
    C. The monitor has been drenched.
    D. When the monitor cannot be used normally even though the specifications are closely referred to, please adjust the buttons designated in the manual because other improper adjustments may cause danger and it requires a great deal of repair and maintenance from a repairman to set the monitor right.
    E. The monitor has fallen or the main case is damaged.
    F. When obvious abnormalities occur to the monitor, a repair is needed.

15. While getting the components replaced, you are supposed to guarantee that the repairman is using the substitute components specified by the manufacturer. These substitute components must be same as original components in terms of functionality and performance. Unauthorized component replacement might cause fire, electric shocks or other dangers.

16. When a repair for the monitor is finished, the repairman should conduct routine safety inspection in order
    to guarantee that the monitor is in safe operational condition .

17. Plug is supposed to be placed near the monitor or in positions where it is easy to use.

Brief Introduction

After opening the packing, please confirm that the following articles are in the packing box:

GT-220 Packing List

• LCD screen × 1
• AC adapter × 1
• VGA cable × 1, HDMI cable × 1, USB cable × 1 Pen charging cable × 1, Power cable × 1
• Rechargeable pen × 1, Pen tips × 8, Pen clip × 1, Pen holder × 1
• Manual × 2 (For Windows and Mac)
• Driver software CD × 1

GT- 190 Packing List:

• LCD screen × 1
• AC adapter × 1
• VGA cable × 1, USB cable × 1, Pen charging cable × 1, Power cable × 1
• Rechargeable pen × 1, Pen tips × 8, Pen clip × 1, Pen holder × 1
• Manual × 2 (For Windows and Mac)
• Driver software CD × 1

GT-185 Packing List:

• LCD screen × 1
• AC adapter × 1
• VGA cable × 1, HDMI cable × 1, USB cable × 1, Pen charging cable × 1, Power cable × 1
• Rechargeable pen × 1, Pen tips × 8, Pen clip × 1, Pen holder × 1 Manual × 2 (For Windows and Mac)
• Driver software CD × 1

Overview of the Monitor

Front vie

1. LED monitor and hand input operation area accept hand-input text and image information, and then the data is transmitted to the PC.
2. LED pilot lamp
   When the monitor is functioning properly, the pilot lamp will turn green.
   When it’s not functioning properly, the pilot lamp will turn red.

Remarks : If the pen display shows no signal, please refer to the following procedures:

1. First check that the AC adapter is properly connected and pilot lamp is on.
2. Check if all the ports are connected or not.
3. Whether the PC is properly set or not. References for the PC settings are as follow:

(1) Right click the desktop – screen resolution:

Overview of the push button area

1. POWER : Power switch. It can switch on/off the monitor.
2. MENU : Menu button. On pressing on it, you can activate OSD or conduct the adjustment confirmation.
3. +: Upward adjustment button. When the OSD is activated, adjustment functions include upward, towards the right or increase.
4. -: Downward adjustment button. Adjustment functions: downward, towards the left or decrease.
5. AUTO: Automatic adjustment button. When the OSD menu is active, press this button, it will return to previous menu the OSD. When the OSD menu is inactive, It will auto adjust display made to its utmost performance according to VGA settings.

Overview of the rear

1. VGA input & USB output
   First connect the VGA port with PC through which hand input screen can display the PC screen. Realization of hand input function requires USB port to be connected with the USB port of the PC.

2. DC IN port (power supply)
   Plug the port of the AC adapter into this port and then connect the AC adapter to the nearest AC socket.

3. DVI &HDMI
   Connect the DVI or HDMI port with PC through which hand input screen can display the PC screen.

The Adjustment of the Monitor Support
The angle of the monitor can be adjusted manually

Remarks: The angel of the stand can be adjusted from 15°to 80°.

Installation

Operating System Requirements

Pen input function is supported in following OS: Windows 7/8/8.1/10

Software Installation
Please close all painting software and antivirus software before driver installation.
Please don’t connect the USB cable before driver installation.
We kindly recommend downloading latest drivers form our official website since they are regularly updated.
1) If your PC operating system is Windows 7/8/8.1/10, you need to install pen input driver program.
Installation procedure:
(1) Insert the driver disk into the CD-ROM drive of your PC and run “Setup.exe”. Then the image will appear :
(2) Click “confirm” after finishing the installation.

2) There will be a small icon at the lower corner of the screen after finishing driver installation (Picture 1). Or you can find the driver icon by clicking Start-All Applications-Pen Display Driver (Picture 2). The pen display icon will be disabled if the USB cable is disconnected (Picture 3).
3) After driver installation, please connect the monitor with your PC by USB cable.
4) Click the small icon, enter into pen display configuration (for Windows8).

Driver Interface Introduction

Control Interface

When you double click the Pen display icon ( ) which normally appears in the system tray at the corner of the screen, you will see the control panel (pictured above). It will display driven-related information. Controlling the panel by enclosed rechargeable pen can set up functions for the rechargeable pen, regulate the pen pressure sensitive and modify the working area and shortcut keys.

Pen Pressure Test

Click Pen Pressure Test into Pressure Sensitivity Testing

Pen setting

Key Functions

You can configure various mouse functions for the rechargeable pen (Picture 4): “Mouse Left Button, Mouse Middle Button, Mouse Right Button, None Button, Switch Screen and Keyboard key” from the corresponding right drop-down menu of the “Second Button and First Button.
Note:
(1)”Left Button, Middle Button, Right Button” functions represent a normal mouse left, middle, right button functions.
(2) When choosing “Middle Button”, the corresponding pen button will have the same “press” function as a normal mouse, but will not have the “scroll” function.
(3) When choosing the “Keyboard Keys”, there will appear an “Express Key Setting (as Picture 5-6). You can set up pen button functions in the same way like any “Express Key” or “Keyboard Key” functions.

Screen setting

When your computer is connected to two screens in the extended mode, you can choose the corresponding work area of the monitor in the setup screen area.

1. Monitor 1 : Choose this monitor, the cursor can only move accordingly in your main monitor.
2. Monitor 2 : Choose this monitor, the cursor can only move accordingly in your second monitor.
3. All desktop area: Choose this, the cursor can move from Monitor 1 to Monitor 2

Workspace and Advanced Setting (GT-185)

By clicking “Advanced Setting” button in monitor settings (see the selected area above), you will access the working area and express keys’ settings.

Note:
1) There are 8 Express Keys on the left side of the pen display.
2) You can click any of the Express Keys to set up any keyboard keys functions for the Express Keys.
3) The default functions for Express Keys in Photoshop are as follows: K1:Cancel K2:Erase K3: Switch Pen K4: Zoom In K5: Zoom Out K6: Brush Larger K7: Brush Smaller K8: Move

Calibration

Click the screen calibration button to enter the calibration interface. You will calibrate the screen automatically by using the pen to click the the cross shown on the screen.
By clicking “Restore to Defaults” button it will restore the original calibration.

Pen Pressure Sensitivity Settings

Pressure sensitivity : move the slider from left to right; it can be used to adjust sensitivity of the tip and the severity of the stroke.

Rechargeable Li-ion Battery Pen

Replacing the rechargeable pen tip

A: Pull out the pen tip from rechargeable pen by using a pen Clip that is inside the pen holder.
B: Push the pen tip in to check out if it is secured.

Gently unscrew the pen holder in the counter clockwise direction.
You will see one pen tip replacement tool & 8 spare pen tips inside.

Using OSD (Screen Image Adjustment)

Screen Image Adjustment (GT-190)

Luminance Control

1) Brightness: Adjusting background brightness of the screen images. Press the buttons “-”and “+” to reduce and increase brightness.
2) Contrast: Adjusting difference between darkness and brightness of the screen. Press the buttons “-” and “+” to reduce and increase contrast.
3) Gamma: Adjusting the screen pixie to the certain brightness with the button “-” and “+”.

Picture Control

1) Phase: Adjusting the horizontal blinking of characters on the screen .
2) Clock : Adjusting the vertical blinking of characters on the screen .
3) H.Position: Adjusting images left and right by using the buttons “-” and “+”.
4) V.Position: Adjusting images downward and upward by using the buttons “-” and”+”.

Color Control

1) Color temperature: There are different kinds of color temperature that you can choose from. With the change in color temperature, color of the eight images will also differ.

OSD Control

1. Horizontal: Adjusting the OSD position to left and right by using the buttons “-” and “+”.
2. Vertical: Adjusting the OSD position downward and upward by using the buttons “-” and”+”.
3. Transparency: Adjusting the Transparency of OSD screen image.
4. OSD Time Out: Reduce and increase the residence time of the OSD menu by using the buttons “-” and “+”.

Setup Control

1) Language: There are eight languages that you can choose from.
2) Mute: You can turn on or turn off the sound.
3) Input: There are 2 signal inputs:VGA, DVI.
4) Display Size: There are 3 sizes of the monitor you can choose from.
5) Volume: Adjusting the volume left and right by using the button “-“and “+”.
6) Reset: All the options are restored to the default positions.

Screen Image Adjustment (GT-220[Type A] / GT-185)

AUTO IMAGE ADJUSTMENT

CONTRAST/BRIGHTBESS

CONTRAST: Adjusting difference between darkness and brightness of the screen. Press the button “DOWN” and “UP” to reduce and increase contrast.
BRIGHTNESS: Adjusting background brightness of the screen images. Press the button “DOWN” and “UP” to reduce and increase brightness.

INPUT SELECT

There are 3 signal inputs for you to choose: VGA, DVI, HDMI. The monitor will display the PC screen information according to your choice.

It will show the information of your monitor.

MANUAL IMAGE ADJUST

Press the button “DOWN” and “UP” to adjust H./V.POSITION and HORIZONTAL SIZE. Or you can choose “FINE TUNE” “OVERSCAN” “ECO MODE” “VIEM MODE” to adjust.

MANUAL IMAGE ADJUST

LANGUAGE SELECT: There are 12 languages for you to choose.
OSD TIME OUT : Reduce and increase the residence time of the OSD menu by using button “DOWN” and “UP”.
MEMORY RECALL: All the options are restored to the default positions

Screen Image Adjustment (GT-220[Type B])

Picture Control

1. Brightness: Adjusting background brightness of the screen images. Press the buttons “-”and “+” to reduce and increase brightness.

2. Contrast: Adjusting difference between darkness and brightness of the screen. Press the buttons “-” and “+” to reduce and
   increase contrast.

3. Gamma: Adjusting the screen pixie to the certain brightness with the button “-” and “+”.

Position Control

1. Phase: Adjusting the horizontal blinking of characters on the screen .
2. Clock : Adjusting the vertical blinking of characters on the screen .
3. H.Position: Adjusting images left and right by using the buttons “-” and “+”.
4. V.Position: Adjusting images downward and upward by using the buttons “-” and”+”.

Color Control

1. Color temperature: There are different kinds of color temperature that you can choose from. With the change in color
   temperature, color of the screen images will also differ.

OSD Control

1. Horizontal: Adjusting the OSD position to left and right by using the buttons “-” and “+”.
2. Vertical: Adjusting the OSD position downward and upward by using the buttons “-” and”+”.
3. Transparency: Adjusting the Transparency of OSD screen image.
4. OSD Time Out: Reduce and increase the residence time of the OSD menu by using the buttons “-” and “+”.

Setup Control

1. Language: There are eight languages that you can choose from.
2. Mute: You can turn on or turn off the sound.
3. Input: There are 3 signal inputs: VGA, DVI, HDMI.
4. DCR: You can turn on or turn off the dynamic contrast ratio.
5. Display Size: There are 3 sizes of the monitor you can choose from.
6. Reset: All the options are restored to the default positions.

Possible breakdowns and solutions

Possible Breakdowns Related to the Pen Display

Abnormal phenomena Suggestions

The power indicator does not flash| Whether the power is on or not?
Whether the power wire is connected or not?
Check the socket.
Replace the power wire.
The screen displays nothing|

1. Whether the power of the PC is on or not? If not, please refer to the PC user manual or other documents to solve this problem.
2. Please refer to 2/4 and correctly connect the RGB input signal wire.
3. If you connect the monitor with a laptop, please correctly connect the RGB signal wire after starting the laptop. In the option of display mode settings, switch to the external RGB display mode (There are different switch methods for different laptops. Please refer to the PC user’ s manual and other documents).
4. Whether the pilot lamp is green or not? If the monitor and the PC are in hibernation, please press the keyboard and mouse to restart the system.
5. Is the signal wire broken or bent? If so, please replace the signal wire.

Images are blurred| The best display effect is available with the resolution

– GT-190:1440×900 / GT-220:1920×1080 / GT-185:1366×768

Lack of colors| Check the signal wire of the monitor and confirm that the pin is not bent or fractured.
Images are not in the middle or improper in size| Adjust Clock and Phase or press the AUTO button for automatic setup.
There is chromatism in images| Adjust the RGB color or reselect color temperature.
Images jitter or ripple images appear| It is likely that there is unelectric equipment nearby that brings about electronic interference.

Possible breakdowns related to hand input function

1. If the driver is damaged or is not properly installed, please uninstall the driver and reinstall it. Please refer to 1.3.2.
2. Whether the power is exhausted or not? If so, please charge.
3. If the nib has got shorten due to wear and tear, please replace the nib.
4. Try restarting the PC and the monitor.
5. Try pulling out and inserting the USB wire.

Cursor movement is abnormal| Try pulling out and inserting the USB wire again or restarting the PC.
The side button of the pen doesn’t work| When pressing the side button, please make sure that the nib doesn’t touch glass surface and the distance between the nib and the surface is within 5mm.
There’re great discrepancies in locations| Adjust the screen. Please refer to 2.6 for specific instructions.

Support Tablet PC

Also called Electronic Ink Function, which is normally used for supporting pressure sensitivity under Office 2007, Journal or
later version. For Sketchbook 6.0, Photoshop CC2014(or later) on Windows8 or later system, checking “Support Tablet PC” is
needed to support pressure sensitivity.
As for other drawing software, please read the software instruction carefully to see whether it supports windows Tablet PC or not, and try to disable Support Tablet PC if it is needed.

As the “Support TabletPC” checked, please turn off flicks to get a better using experience.

Product Specifications

Specifications of the Monitor (GT-190)

+60°C
Humidity| Operation: 20 – 80%RH Storage: 5 – 95%RH
Wattage| Less than 36W during operation, less than 1W in the power-saving mode
Power Supply| 12V  3A
Package Size| 558(L) x 124(W) x 408(H)mm
Weight| 3.7kg
| Adjustable Range of the Support| 15° — 80°
| OS Compatibility| Windows 7/8/8.1/10 or later
| Video Interface| VGA, DVI, HDMI
| | | |

Specifications of Pen Input

Remarks: Changes in battery life depends upon the humidity and temperature in environmental conditions.

References

• Manual-Hub.com – Free PDF manuals!

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>