BCXAXA BF-MY01 Mini Smart Camera User Manual
- June 10, 2024
- BCXAXA
Table of Contents
BCXAXA BF-MY01 Mini Smart Camera User Manual
What’s in the Box
Consult the Checklist below for all components
-
Camera
-
Power adapter
-
USB Cable
-
Bracket
-
Pin
-
Screws
-
Manual
Description
| Power | DC5V±10% |
|---|---|
| Status light |
- Red light solids on: the camera network is abnormal Blinking red light: awaiting WiFi connecting
- Blue light solids on: camera running correctly
- Blinking blue light: currently connecting
Microphone| Captures sounds for your video
SD card slot| Supports local SD Card storage (Max.128G)
Reset| Press and hold for 5 seconds with pin to reset the device
Installations Method
-
Ceiling Mount: Use the included mounting bracket to fix the camera on a clean surface;
-
Surface Mount: Place the camera on the flat surface directly.
Download
Cloud Edge is available for both iOS and Android OS. Search the name ‘Cloud
Edge ‘in App Store or Android Market, or scan upper OR—Code to download the
App.
Connection
Support
-
IOS
-
Android
Set up router
This product only supports 2.4GHz frequency band router, does not support 5GHz
frequency band router, please set the relevant parameters of the router before
WiFi configuration, WiFi passwords do not include special characters such as
-!@#$%^&*(). When the device is configured in WiFi, the mobile phone and
device are as close as to the router, which can speed up the configuration of
the device.
NOTE: If you need to re-select the WiFi network, please press and hold the “RESET” button for 5 seconds, the device will restart, and the indicator will be flashing red.
Registration process
Step 1 Open the CloudEdge App, click ‘SIGN UP’, input a valid email
address and select ‘registration means agreement with user agreement privacy
agreement’ then click ‘NEXT’.
Step 2 Enter the email address and click ‘OK’, create a nickname and
login password.
Note: Make sure your router, device, and mobile phone are nearby.
QR Code Configuration
Few notices before adding the device
- This device only supports 2.4GHz WiFi router, please make sure you are using a 2.4GHz WiFi router.
- Please follow the instructions and make sure the password is inputed correctly.
- One device can only be added with one App account, if the device has been added with another account already, then it can’ t be added to any another account again.
Process
Step 1 Open the Cloud Edge App, click ‘+’, and select the type of device
to add.
Step 2 Enter the email address and click ‘OK’, create a nickname and
login password.
Step 3 The device is scanning the OR code at a distance of 15-25cm (you
can click the ‘operation’ to view the scanning mode). After the device scans
successfully, click ‘Hear tone’.
Step 4 The device is successfully connected to the network. After the
configuration is completed, the App automatically adds the successfully
scanned device, and return to the device list. The configuration is completed.
Step 5 Click the play button to complete the preview. (Remind: long press
the image to be previewed to remove the device, add device again to reset the
device)
Functions
Pan/Tilt
Rotate your camera by sliding on your smartphone, providing you with 360
degrees of vision.
Video flip
Flip your video stream up or down for maximum flexibility.
Motion detection
Built-in motion sensors detect movement, and the camera will send you push
notifications and app alerts.
Record
Support 24H continuous recording with high capacity SD storage.
Day & Night
Never miss a moment, even in complete darkness, with powerful night-vision
technology.
FAQ
Q: The device cannot be previewed properly?
A: Check whether the network is normal, you can place the camera close to
the router, and if not, it is recommended to reset the device and add it
again.
Q: Why is it still in the list of devices after reseting?
A : The reset device only resets the network configuration of the camera,
but cannot change the configuration on the App, remove the camera, and must be
deleted by the App.
Q: How to cut the camera network to another router?
A : First remove and reset the device on the App and then configure the
device again by the App.
Q: Why doesn’t the device identify the SD card?
A : It is recommended to plug in SD card after power cut. Confirm whether
the SD card is normally available and the format is FAT32. And the TF card
can’t be identified when the internet environment is not good.
Q: Why I can’t get the notifications with my cell phone App?
A: Please confirm that the App has been running on the phone, and the
relevant reminder function has been opened; Message notification and authority
confirmation in the mobile phone system have been opened.