VIKING Harley Sportster Incognito Solo Saddlebag Installation Guide

VIKING Harley Sportster Incognito Solo Saddlebag

Parts

1. Mounting Bracket × 1
2. Socket Head Bolt – M12 x 95mm × 1
3. Socket Head Bolt – M8 x 76mm × 1
4. Washer × 1
5. Spacer 10mm × 1
6. Spacer 5mm × 1
7. Detachable Solo Bag × 1

Note:

1. Before starting step 1 make sure to lift the motorcycle with a suitable motorcycle jack.
2. Tighten screws with the manufacturer’s specified torque.
3. Make sure to use Loctite for the final step.
4. This Installation step shows the left-hand side, but the same steps apply to the right-hand side assembly.

Parts Diagram

Instructions

• Step 1
  Remove the bolts from the shock strut and motorcycle frame as shown in Fig 2.

Note:
Use the correct configuration of mounting hardware for your motorcycle model as shown in Fig 3. and Fig 4. before step 2.

• Step 2
  Attach the mounting bracket (i) to the motorcycle frame as shown in Fig 5 and use the stock nut. Make sure to tighten the bolts using the manufacturer’s recommended torque.

• Step 3

  • Use the pre-installed adapter plate in the back of the Viking Detachable Solo Bag to mount it on the bracket as shown in Fig 6. Press the Solo Bag onto the mounting pegs until it properly rests on the mounting bracket.
  • In order to release the bag, press the lever or pull the quick-release cord.

Tip:

• The internal bracket locking system is behind the removable waterproof lining
• The quick disconnect system is key lockable. Lock / unlock the quick disconnect system from inside the bag to secure your bag against theft.

Congratulations, your Viking Incognito Solo Bag is installed and you are ready to ride!

Warnings!

• Do not install if any of the mounting hardware is damaged or impaired.
• If you have any questions or concerns about the installation, call Viking Bags or consult a certified motorcycle mechanic.
• Ensure no part of the bag obstructs any of the moving parts of the bike
• Viking Bags is not liable for any damage or injury caused by improper installation or use of the product.
• Improper loading can cause vehicle handling problems, leading to death or severe injury.
• Periodically check for any signs the bags or bolts are loose and that no mounting kit parts are interfering your motorcycle’s drive train, suspension, brakes, wheels, etc.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>