BRIO 3214-896 G Freight Battery Engine Instruction Manual
- June 12, 2024
- BRIO
Table of Contents
BRIO 3214-896 G Freight Battery Engine
Product Information
This product is a battery-powered locomotive toy. It is designed to move forward and backward on a track. The toy features a lever on the roof that controls the direction of the locomotive (forward/backward). The headlights of the locomotive turn on when it is in motion. The toy is equipped with rubber wheels for better traction.
It is important to note that when the locomotive is moving on an uphill track, it must be operated in the forward direction. The toy is not water-resistant and should not be exposed to water or placed in a dishwasher. To clean the toy, wipe it with a clean, dry cloth. It is recommended to avoid direct sunlight and other heat sources to prevent discoloration of the plastic parts.
To ensure the longevity of the toy, please refer to our website brio.net for additional care instructions.
Product Usage Instructions
- Insert one AA 1.5V battery into the battery compartment of the locomotive. Use a screwdriver to open the battery compartment (refer to the provided image). Place the battery according to the indicated polarity (+/-). Close the compartment and tighten the screw.
- Place the locomotive on a clean track.
- To move the locomotive forward, push the lever on the roof towards the front. To move it backward, push the lever towards the back.
- The headlights of the locomotive will turn on automatically when it is in motion.
For optimal performance, play with the toy on clean tracks. This toy is intended for indoor use only. Avoid allowing hair to come into contact with moving parts, as it may get tangled. Do not disassemble the toy for safety reasons. Dispose of used batteries in accordance with local regulations.
For more detailed information on how to maintain your beloved BRIO toys, please visit our website brio.net.
Battery Powered Engine
Battery-operated play functions: Switch on top activates forward/reverse movement. Headlights glow when engine runs.
Note! The engine needs to be driving in the forward direction when driving up an ascending track.
Keep in mind that:
- For the best play experience, always play with the engine on clean tracks.
- The toy is intended for indoor play only.
- The child’s hair can easily get caught in moving parts.
- The toy is not water-resistant and shall not be washed in a dishwasher as well as come into direct contact with water. Wipe with a clean dry cloth to remove any foreign materials.
- The toy shall not be disassembled for safety reasons.
- The plastic in the toy can fade over time. Avoid strong sunlight and other heat sources.
Please visit our website at brio.net for more information on how to care for your prized BRIO toy.
Inserting and changing the Battery:
This engine is powered by 1xAA 1.5V battery. Use a screwdriver to open the
battery compartment cover
(see illustration). Always position new battery as shown (+/–). Close the
cover and tighten the screw.
Important:
- Only adults should install and replace batteries.
- Different types of batteries or new and used batteries are not to be mixed.
- Only recommended batteries of the same or equivalent type as recommended (1.5V) are to be used.
- Batteries are to be inserted with the correct polarity.
- Exhausted batteries are to be removed from the toy.
- The supply terminals are not to be short-circuited.
- Always remove batteries if the toy is not to be used for some time.
- Protect the toy from water or dampness.
- Do not attempt to recharge non-rechargeable batteries..
- Rechargeable batteries are to be removed from the toy before being charged.
- Rechargeable batteries are only to be charged under adult supervision.
- Used batteries and electrical components must be disposed of at an approved collection point.
- Electrical components or batteries must not be thrown with household waste.
Please retain for future reference!
BRIO AB, Box 305, SE-201 23 Malmö, Sweden. Tel: +46 40 619 40 00. © 2013 BRIO AB/3214-896 G