mackie CR8S BT Creative Reference Subwoofer User Guide

mackie CR8S BT Creative Reference Subwoofer

Specifications:

• Product Name: CR8SBT Creative Reference Subwoofer with Bluetooth
• Manufacturer: Mackie
• Bluetooth Connectivity: Yes
• Power Switch: Rocker-style AC hands power switch
• Voltage: 120V-240V AC, 50/60Hz
• Dimensions: 12″ x 12″ x 12″

Product Usage Instructions

Important Safety Instructions:
Before using the CR8SBT Creative Reference Subwoofer with Bluetooth, it is crucial to follow these safety instructions:

1. Read and keep the instructions manual for future reference.
2. Heed all warnings and followed all instructions provided.
3. Avoid placing the subwoofer near water sources or heat-producing appliances.
4. Ensure proper ventilation around the subwoofer for optimal performance.
5. Do not overload wall outlets or use extension cords that may pose a fire hazard.

Setup and Installation:
Follow these steps to set up your CR8SBT Subwoofer:

1. Place the subwoofer on a stable surface with sufficient ventilation space around it.
2. Connect the power cord to a grounded outlet with the specified voltage requirements.
3. If using Bluetooth, activate the Bluetooth function on your device and pair it with the subwoofer.

Operation:
To operate the subwoofer:

1. Use the power switch located on the rear panel to turn the subwoofer on/off.
2. Adjust volume and settings as needed using the controls provided on the subwoofer or connected device.

Maintenance and Care:
To ensure longevity and optimal performance:

1. Clean the subwoofer with a dry cloth regularly.
2. Avoid exposing the subwoofer to rain, moisture, or liquid spills.

Frequently Asked Questions

Q: Can I place objects on top of the subwoofer?

A: No, avoid placing objects filled with liquids on the subwoofer as it may cause damage.

Q: How do I know if the subwoofer is properly ventilated?

A: Ensure there is a minimum distance of 5 cm around the subwoofer for adequate ventilation.

Q: What should I do during lightning storms?

A: Unplug the subwoofer during lightning storms to prevent damage from power surges.

Important Safety Instructions

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

7. Do not block any ventilation openings. Install by the manufacturer’s instructions.

8. Minimum distance (5 cm) around the apparatus for sufficient ventilation.

9. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

10. No naked flame sources, such as lighted candles, should be placed on the apparatus.

11. The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. The equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.

12. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

13. Only use attachments/accessories specified by the manufacturer.

14. Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

15. Unplug this apparatus during lightning storms or when unused for long periods.

16. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

17. This apparatus shall not be exposed to dripping or splashing, and no object filled with liquids, such as vases or beer glasses, shall be placed on the apparatus.

    • Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock.
      CAUTION
      RISK OF ELECTRIC SHOCK! DO NOT OPEN!

    • CAUTION:
      TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER- SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL.

    • The lightning flash with the arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure, which may be of significant magnitude to constitute a risk of electric shock to persons.

    • The exclamation point within an equilateral triangle is intended to alert the user of the presence of important operating and maintaining (servicing) instructions in the literature accompanying the appliance.

    • WARNING — To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.

    • CAUTION — To prevent electric shock hazards, do not connect to the mains power supply while the grille is removed.

    • CAUTION – These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so.

18. This apparatus has been equipped with a rocker-style AC mains power switch. This switch is located on the rear panel and should remain readily accessible to the user.

19. The MAINS plug or an appliance coupler is used as the disconnect device, so the disconnect device shall remain readily operable.

20. Explanation of symbol, marking, signal lamp, or similar means indicates that the apparatus is completely disconnected from the mains.

21. WARNING: Please refer to the information on the exterior bottom enclosure for electrical and safety information before installing or operating the apparatus.

22. The maximum ambient temperature during use of the appliance must not exceed 10–50˚ C // 50–122˚ F.

23. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
    If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

    • Reorient or relocate the receiving antenna.
    • Increase the separation between the equipment and the receiver.
    • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
    • Consult the dealer or an experienced radio/TV technician for help.
      CAUTION: Changes or modifications to this device not expressly approved by LOUD Audio, LLC. could void the user’s authority to operate the equipment under FCC rules.

24. This apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the radio interference regulations of the Canadian Department of Communications. CAN ICES-003(B)/NMB-003(B)

25. This apparatus has been designed with Class-I construction and must be connected to a main socket outlet with a protective earthing connection (the third grounding prong).

26. This device complies with Part 15 of the FCC rules and Industry Canada’s license-exempt RSS standard(s). Operation is subjected to the following two conditions:

27. this device may not cause harmful interference, and

28. this device must accept any interference received, including interference that may cause undesired operation.

29. RF Power: <10dBm

30. Bluetooth Version: 5.0

31. Bluetooth frequency range: 2402 – 2480 MHz

32. Exposure to extremely high noise levels may cause permanent hearing loss.

Individuals vary considerably in susceptibility to noise-induced hearing loss, but nearly everyone will lose some hearing if exposed to sufficiently intense noise for some time. The U.S. Government’s Occupational Safety and Health Administration (OSHA) has specified the permissible noise level exposures shown in the following chart.

According to OSHA, any exposure over these permissible limits could result in some hearing loss. To ensure against potentially dangerous exposure to high sound pressure levels, it is recommended that all persons exposed to equipment capable of producing high sound pressure levels use hearing protectors while the equipment is in operation. Ear plugs or protectors in the ear canals or over the ears must be worn when operating the equipment to prevent permanent hearing loss if exposure is more than the limits set forth here:

Duration, per day in hours

| Sound Level dBA, Slow Response|

Typical Example

---|---|---
8| 90| Duo in a small club
6| 92|
4| 95| Subway Train
3| 97|
2| 100| Very loud classical music
1.5| 102|
1| 105| Ty screaming at Troy about deadlines
0.5| 110|
0.25 or less| 115| Loudest parts at a rock concert

Correct disposal of this product:
This symbol indicates that this product should not be disposed of with your household waste, according to the WEEE directive (2012/19/EU) and your national law. This product should be handed over to an authorized collection site for recycling waste electrical and electronic equipment (EEE). Improper handling of this type of waste could have a possible negative impact on the environment and human health due to potentially hazardous substances that are generally associated with EEE. At the same time, your cooperation in the correct disposal of this product will contribute to the effective usage of natural resources. For more information about where you can drop off your waste equipment for recycling, please contact your local city office, waste authority, or your household waste disposal service.

Hookup Diagrams

Stereo speaker hookup with one CR8SBT subwoofer

Bluetooth stereo speaker hookup with one CR8SBT subwoofer

Front & Rear Panel Descriptions

1. Power Connector Connect the supplied AC power cord to this IEC jack.
2. Power Switch Turns the subwoofer on and off. The front LED will illuminate when powered.
3. Inputs Connect a line-level signal from a mixer or other signal source.
4. Outputs Connect these to studio monitors.
5. Input Level Adjusts the input sensitivity.
6. The output Level Adjusts the overall output level.
7. Crossover Optimizes the subwoofer and monitors connected to the outputs.
8. The polarity Switch Inverts the polarity of the subwoofer.
9. CRDV Connector Connect the supplied CRDV Volume Control to this 1/4″ jack.
10. CRDV Volume Control Allows for separate control of the overall system output level and subwoofer output level.
11. Bluetooth Press and hold to pair with a Bluetooth device, press quickly to connect to the last connected Bluetooth device, or press quickly while connected to a Bluetooth device to pause/play audio. The Bluetooth may disconnect when affected by Electrostatic Discharge [ESD]. Manually reconnect the Bluetooth connection.

Technical Specifications

|

CR8SBT

---|---
Frequency Range **(–10 dB)| 35 Hz –400 Hz
Maximum SPL Peak| 112 dB
Total System Power| 200 watts peak Class D power amplifier
Input/Output Type| Female 1/4″ balanced–unbalanced / RCA unbalanced
Bluetooth**| 3.0

Audio streaming

Power Requirements| 100V–240V ~

50–60Hz

150W

Size (H × W × D)| CR8SBT

14.0 x 12.6 x 16.2 in

356 x 320 x 411 mm

| CRDV

2.0 x 4.3 x 3.2 in

51 x 110 x 81 mm

Weight| CR8SBT

24.5 lb

11.1 kg

| CRDV

0.31 lb

0.14 kg

• All specifications are subject to change.
• This equipment may be used in all European markets without restrictions.

WARRANTY AND SUPPORT

VisitWWW.MACKIE.COM to:

• Identify WARRANTY coverage provided in your local market. Please keep your sales receipt in a safe place.
• Retrieve a full-version, printable OWNER’S MANUAL for your product.
• DOWNLOAD software, firmware, and drivers for your product (if applicable).
• REGISTER your product.

CONTACT Technical Support.

• 19820 NORTH CREEK PARKWAY #201 • BOTHELL, WA 98011 • USA
• Phone: 425.487.4333
• Toll-free: 800.898.3211
• Fax: 425.487.4337
• Web: www.mackie.com.

Part No. 2057571 Rev. A 06/24 ©2024 LOUD Audio, LLC. All Rights Reserved.

Hereby, Loud Audio, LLC declares that the radio equipment type [CR8SBT • CRDV] complies with Directive 2014/53/EU. The full text of the EU Declaration of Conformity and Bluetooth conformity is available at the following internet address: https://mackie.com/en/support/drivers-downloads?folderID=27309.

References

• MACKIE
• Drivers/Downloads | MACKIE

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>